Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: GA-MA785GMT-UD2H: Cold boot BSOD




  1. #1
    Join Date
    May 2010
    Location
    NL
    Posts
    9

    Question GA-MA785GMT-UD2H: Cold boot BSOD

    My problem is as follows:
    • When cold booting (computer has been turned off for at least several hours), I get a BSOD just after the Windows 7 `Starting Windows` logo screen.
    • The BSOD message differs: CI.dll error is most common, then CI.dll + PAGE_FAULT_IN_NON_PAGED_AREA, and sometimes IRQL_NOT_LESS_OR_EQUAL (haven't seen the last one for a while now).
    • In rare cases, the computer boots, but gives a BSOD after a few secs on the desktop.
    • Just resetting (via the reset button) doesn't help: it results in BSOD again, usually the same as during the first cold boot. After turning the PC off (holding the power button), and turning it on again, the computer boots perfectly.
    • After a succesful boot, Windows runs perfectly, including games (e.g. COD4 and GTA IV).
    • I have tested memory with memtest for 7 passes -> no errors
    • I use the latest BIOS: F8, but the problem occurred with earlier BIOSses as well


    Software:

    * Windows 7 x64 Home Premium

    Hardware:

    * Home-built system, 3 months old
    * Motherboard: Gigabyte GA-MA785GMT-UD2H, BIOS F8
    * CPU: AMD Phenom II 955 BE
    * Video Card: XFX HD-489X-ZSFC (Radeon 4890)
    * Memory: 2x Corsair CM3X2G1333C9D (2x2Gb)
    * PSU: OCZ ModXstream 650W
    * Storage: Intel X25-M 80GB SSD, Hitachi 1TB HDD
    * Input: MS Comfort Curve 2000 USB keyboard, Logitech G9 USB mouse
    Last edited by icebergnl; 05-18-2010 at 06:51 PM.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-MA785GMT-UD2H: Cold boot BSOD

    Are you setting your memory voltage to spec, and adding NB Vid?

    I can't help much with AMD, but I do know you will need to do the above mentioned things for 4GB of memory

  3. #3
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: GA-MA785GMT-UD2H: Cold boot BSOD

    id try with a different brand of psu aswell if you can borrow one,ocz and gigabyte dont get on very well
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  4. #4
    Join Date
    May 2010
    Location
    NL
    Posts
    9

    Default Re: GA-MA785GMT-UD2H: Cold boot BSOD

    I tried the BIOS fail-safe defaults, as well as optimized default.
    Memory voltage seems to spec, 1.65V if I remember correctly (not at home at the moment). Will check it tonight.

    What is the NB VID? Is that de voltage of the memory controller?

    Quote Originally Posted by wazza300 View Post
    id try with a different brand of psu aswell if you can borrow one,ocz and gigabyte dont get on very well
    Don't they? I actually bought the OCZ as a replacement for a Corsair VX550, because I thought that baby could be the problem. Didn't seem to make a difference though.
    Will try the Corsair again though.
    Last edited by icebergnl; 05-18-2010 at 07:21 PM.

  5. #5
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: GA-MA785GMT-UD2H: Cold boot BSOD

    it might be fine,try with different bios settings first,north bridge voltage is vid,it might need a few clicks more
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  6. #6
    Join Date
    May 2010
    Location
    NL
    Posts
    9

    Default Re: GA-MA785GMT-UD2H: Cold boot BSOD

    Ok, will try upping the Mem and NB voltage tonight.
    How high should I set the NB voltage? What voltage is still safe?

    <hints id="hah_hints"></hints>

  7. #7
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: GA-MA785GMT-UD2H: Cold boot BSOD

    i dont now much about amd voltages,but make a note of what it is and try one-two maybe three clicks higher andsee if you have any luck
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  8. #8
    Join Date
    May 2010
    Location
    NL
    Posts
    9

    Default Re: GA-MA785GMT-UD2H: Cold boot BSOD

    Ok, I'll try that, and see if I get any luck, finally..

  9. #9
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: GA-MA785GMT-UD2H: Cold boot BSOD

    http://download.gigabyte.ru/manual/m...-ud(s)2h_e.pdf
    Please check the part number on the memory for verification before adjusting voltage. This is the closest number I could find from the one you provided.
    Welcome to Corsair :: Memory Configurator
    I may be able to help you. It still may be the memory settings.
    To start you may want to try this in this order.
    Load optimized defaults save and exit. Then set memory voltage. Try this let us know how that goes.
    Leave these settings like this and when you reply with these settings. We will help you set the memory timings.
    Code:
    MB Intelligent Tweaker(M.I.T.)
    } Advanced Clock Calibration [Press Enter]
    CPU Clock Ratio [Auto] 2800Mhz
    CPU NorthBridge Freq. [Auto] 2000Mhz
    CPU Host Clock Control [Auto]
    x CPU Frequency(MHz) 200
    PCIE Clock(MHz) [Auto]
    HT Link Width [Auto]
    HT Link Frequency [Auto] 2000Mhz
    VGA Core Clock control [Disabled]
    x VGA Core Clock(MHz) 500
    Set Memory Clock [Auto]
    x Memory Clock x6.66 1333Mhz
    } DRAM Configuration [Press Enter]
    ******** System Voltage Optimized ********
    System Voltage Control [Manual]
    DDR3 Voltage Control [+0.2]
    NorthBridge Volt Control [Normal]
    SouthBridge Volt Control [Normal]
    SidePort Mem Volt Controlj [Normal]
    CPU NB VID Control [Normal]
    CPU Voltage Control [Normal]
    Normal CPU Vcore 1.3250V
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  10. #10
    Join Date
    May 2010
    Location
    NL
    Posts
    9

    Default Re: GA-MA785GMT-UD2H: Cold boot BSOD

    +0.20? Isn't that a bit high? I've turned it up one click @ +0.050. No boot errors so far.

    I've included the Memory timings dialog from AMD Overdrive. Anything interesting here?

    Furthermore, in AMD overdrive, the Fan control is disabled. It seems my CPU fan is not recognized. Is that normal?

    Attachment 2527
    Last edited by icebergnl; 05-21-2010 at 01:06 AM.

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •