Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: EasyTune6 Reference Voltages?




  1. #1
    Ken429 is offline Senior Member
    Join Date
    Aug 2009
    Location
    Valapariso, Indiana
    Posts
    516

    Default EasyTune6 Reference Voltages?

    How do I tell what voltage the BIOS (EP45-UD3P Rev 1.6 BIOS version FE) is using when I set the CPU Reference, MCH Reference, MCH/DRAM Reference, DRAM Termination to AUTO? Looks like ET6 just shows the initial setting? I am using the latest version of ET6 that I just downloaded and installed from the Gigabyte web site.

  2. #2
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: EasyTune6 Reference Voltages?

    When setting Cpu ref and MCH ref to auto the bios will must lickly stick them to default... Auto either doesnt do a damn thing to voltages or it WAY Over shoots them. If you go into bios look at your Cpu Termination setting and take note of it. Now set it to default 1.2 now set your cpu and mch refs to one step up from defualt 0.76 then set cpu term aka VTT back to what t was set at. You will se them change in ET. Dram Termination is adjusted by Dram voltage. for that Set vdimm to default 1.8 and set the termination to default or what ever setting you like then raise vdimm back up to where you had it.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  3. #3
    Ken429 is offline Senior Member
    Join Date
    Aug 2009
    Location
    Valapariso, Indiana
    Posts
    516

    Default Re: EasyTune6 Reference Voltages?

    Thanks for the reply. That is what we did for the Q9550 which ended up with a CPU Termination of 1.24v and a CPU Reference and MCH Reference of .825v. ET6 shows .800v?! Close enough I guess?! The reason the question came up is I have the CPU Termination set to 1.24v and a CPU Reference and MCH Reference set to AUTO on the E8500 system and it is stable at 4GHz. ET6 shows the default of .760v. Either I got lucky or the E8500 does not need the bump in Reference Voltages to get stable like the Q9550.

  4. #4
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: EasyTune6 Reference Voltages?

    yes cpu ref and mch ref are for really big OC. or Helps out the quads get a big oc but nothing Huge. Easy tune should show you the settings of what you set of cpu ref and mch ref when you set them with vtt at 1.2. There might be a little diffrence it could be just in the software. Just remember dont adjust them in ET use the bios. You can ajust vcore, vtt, vmch in ET6 test then make those changes in BIOS.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •