Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 44

Thread: Settings for 3.8GHz overclock: i7-920, Gigabyte EX58-UD5 with latest F12 BIOS




  1. #31
    Join Date
    Jan 2011
    Location
    Ireland
    Posts
    9

    Default Re: Settings for 3.8GHz overclock: i7-920, Gigabyte EX58-UD5 with latest F12 BIOS

    I'm using Wazza settings for the last year or so , But I want to try and move up to 4.2ghz , I have same mobo as above plus H70 cooler , I using the corsair XMS3 6GB 1600 at 8 8 8 20 , Any Ideas most welcome

    Cheers
    Paul

    [QUOTE=wazza300;371121]heres what i use for 3.8ghz for howardb,

    Advanced CPU Features:
    CPU Clock Ratio ............................. [21x]
    DP Frequency ................................ 3.80GHz (180x21)
    Intel(R) Turbo Boost Tech ................... [Enabled] disabled if you have 930 chip
    CPU Cores Enabled ........................... [All]
    CPU Multi Threading ......................... [Enabled]
    CPU Enhanced Halt (C1E) ..................... [Disabled] use balanced profile in win7 power saving options
    C3/C6/C7 State Support ...................... [enabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ........................... [enabled]
    Virtualization Technology ................... [enabled]
    Bi-Directional PROCHOT ...................... [Enabled]

    Uncore & QPI Features:
    QPI Link Ratio .............................. [x36]
    QPI Link Speed .............................. 7.xxGHz
    Uncore Frequency ............................ [x17]
    Isonchronous Frequency ...................... [Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... [180]
    PCI Express Frequency (MHz) .............. [100]


    Advanced Clock Control:
    CPU Clock Drive ............................ [800mV]
    PCI Express Clock Drive .................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Advanced DRAM Features:
    Performance Enhance .................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled] --> Disable XMP and manually adjust your ram latencies
    System Memory Multiplier (SPD) ........ [8.0]set to this to give you 1600mhz ram speed
    Memory Frequency (Mhz) ................ 1600 will set it to 1440mhz due to 180bclk
    DRAM Timing Selectable (SPD) .......... [Quick]
    Profile DDR Voltage ................... xxxxV
    Profile QPI Voltage ................... xxxxV
    Channel Interleaving .................. [Auto]
    Rank Interleaving ..................... [Auto]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ........................... 8 [8]
    tRCD ....................................... 8 [8]
    tRP ........................................ 8 [8]
    tRAS ....................................... 24 [24]set according to ram



    ##Channel A Advanced Timing Control##
    tRC ........................................ [Auto]
    tRRD ....................................... [Auto]
    tWTR ....................................... [Auto]
    tWR ........................................ [Auto]
    tWTP ....................................... [Auto]
    tWL ........................................ [Auto]
    tRFC ....................................... [Auto]
    tRTP ....................................... [Auto]
    tFAW ....................................... [Auto]
    Command Rate (CMD) ......................... [Auto]

    ##Channel A Misc Timing Control##
    B2B CAS Delay .............................. [Auto]
    Round Trip Latency ......................... [Auto]

    Advanced Voltage Control:

    CPU
    Load Line Calibration ...................... [disabled]
    CPU Vcore .......................... 1.2375V [normal] also look for dvid in bios and set to normal
    QPI/VTT Voltage .................... 1.175V [1.315V] or 1.3000v may need more if unstable
    CPU PLL ............................ 1.800V [auto]

    MCH/ICH
    PCIE .............................. 1.500v [auto]
    QPI PLL ........................... 1.100v [auto]
    IOH Core ........................... 1.100v [auto]
    ICH I/O ............................ 1.500v [auto]
    ICH Core ........................... 1.100v [auto]

    DRAM
    DRAM Voltage ....................... 1.500V [1.660V]
    DRAM Termination ................... 0.750v [AUTO]
    Ch-A Data VRef. .................... 0.750v [AUTO]
    Ch-B Data VRef. .................... 0.750v [AUTO]
    Ch-C Data VRef. .................... 0.750v [AUTO]
    Ch-A Address VRef. ................. 0.750v [AUTO]
    Ch-B Address VRef. ................. 0.750v [AUTO]
    Ch-C Address VRef. ................. 0.750v [AUTO]

    @grillo you can try those above but with around 1.3-1.4v for qpi/vtt voltage[

  2. #32
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Settings for 3.8GHz overclock: i7-920, Gigabyte EX58-UD5 with latest F12 BIOS

    Try this for 4.2
    Advanced CPU Features:
    CPU Clock Ratio ............................. [21x]
    DP Frequency ................................ 4.20GHz (200x21)
    Intel(R) Turbo Boost Tech ................... [Enabled] << Disabled and set x21 above, or if 920 and you can't do that, set enabled and x20 above resulting in x21
    CPU Cores Enabled ........................... [All]
    CPU Multi Threading ......................... [Enabled]
    CPU Enhanced Halt (C1E) ..................... [Disabled] use balanced profile in win7 power saving options
    C3/C6/C7 State Support ...................... [enabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ........................... [enabled]
    Virtualization Technology ................... [enabled]
    Bi-Directional PROCHOT ...................... [Enabled]

    Uncore & QPI Features:
    QPI Link Ratio .............................. [x36]
    QPI Link Speed ..............................
    Uncore Frequency ............................ x16-x18
    Isonchronous Frequency ...................... [Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... [200]
    PCI Express Frequency (MHz) .............. [100]


    Advanced Clock Control:
    CPU Clock Drive ............................ [800mV]
    PCI Express Clock Drive .................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Advanced DRAM Features:
    Performance Enhance .................... [Standard] << Extreme, best performance and stability on X58
    Extreme Memory Profile (X.M.P) ......... [Disabled] --> Disable
    System Memory Multiplier (SPD) ........ [8.0]
    Memory Frequency (Mhz) ................ 1600
    DRAM Timing Selectable (SPD) .......... [Quick] << Expert, set each channel main timings and command rate one by one
    Profile DDR Voltage ................... xxxxV
    Profile QPI Voltage ................... xxxxV
    Channel Interleaving .................. [Auto]
    Rank Interleaving ..................... [Auto]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ........................... 8 [8]
    tRCD ....................................... 8 [8]
    tRP ........................................ 8 [8]
    tRAS ....................................... 24 [24]set according to ram



    ##Channel A Advanced Timing Control##
    tRC ........................................ [Auto]
    tRRD ....................................... [Auto]
    tWTR ....................................... [Auto]
    tWR ........................................ [Auto]
    tWTP ....................................... [Auto]
    tWL ........................................ [Auto]
    tRFC ....................................... [Auto]
    tRTP ....................................... [Auto]
    tFAW ....................................... [Auto]
    Command Rate (CMD) ......................... [Auto] << 1T

    ##Channel A Misc Timing Control##
    B2B CAS Delay .............................. [Auto]
    Round Trip Latency ......................... [Auto]

    Advanced Voltage Control:

    CPU
    Load Line Calibration ...................... [disabled] << Level 1
    CPU Vcore .......................... 1.2375V [normal] also look for dvid in bios and set to normal << I suggest manually setting this, if you've been using DVID then you'll need to increase it yourself by guessing and tweaking until you find the right amount.
    QPI/VTT Voltage .................... 1.175V [1.315V-1.38]
    CPU PLL ............................ 1.800V or less 1.4-1.7

    MCH/ICH
    PCIE .............................. 1.500v
    QPI PLL ........................... 1.100v [auto] auto or 1.2
    IOH Core ........................... 1.100v [auto] 1.1-1.14
    ICH I/O ............................ 1.500v
    ICH Core ........................... 1.100v

    DRAM
    DRAM Voltage ....................... 1.500V [1.660V]
    DRAM Termination ................... 0.750v [AUTO]
    Ch-A Data VRef. .................... 0.750v [AUTO]
    Ch-B Data VRef. .................... 0.750v [AUTO]
    Ch-C Data VRef. .................... 0.750v [AUTO]
    Ch-A Address VRef. ................. 0.750v [AUTO]
    Ch-B Address VRef. ................. 0.750v [AUTO]
    Ch-C Address VRef. ................. 0.750v [AUTO]

  3. #33
    Join Date
    Jan 2011
    Location
    Ireland
    Posts
    9

    Default Re: Settings for 3.8GHz overclock: i7-920, Gigabyte EX58-UD5 with latest F12 BIOS

    Hi

    Thanks for the reply , I have the 920 chip , So do I Disable the turbo or leave it on , Sorry not sure what you mean in your config , I tried your setting with the Turbo on but the system would not boot .

    Cheers
    Paul

  4. #34
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Settings for 3.8GHz overclock: i7-920, Gigabyte EX58-UD5 with latest F12 BIOS

    what voltages does normal use for cpu voltage in bios? then i can tell you roughly what to set dvid too,i had no issues with dvid and all power saving turned on @4.2ghz with my board/chip
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  5. #35
    Join Date
    Jan 2011
    Location
    Ireland
    Posts
    9

    Default Re: Settings for 3.8GHz overclock: i7-920, Gigabyte EX58-UD5 with latest F12 BIOS

    Quote Originally Posted by wazza300 View Post
    what voltages does normal use for cpu voltage in bios? then i can tell you roughly what to set dvid too,i had no issues with dvid and all power saving turned on @4.2ghz with my board/chip
    Hi Wazza

    Thanks for replying , The normal Voltages are as follows

    CPU
    Load Line Calibration ...................... [disabled]
    CPU Vcore .......................... 1.26250V
    QPI/VTT Voltage .................... 1.175V
    CPU PLL ............................ 1.800V

    MCH/ICH
    PCIE .............................. 1.500v
    QPI PLL ........................... 1.100v
    IOH Core ........................... 1.100v [
    ICH I/O ............................ 1.500v
    ICH Core ........................... 1.100v

    DRAM
    DRAM Voltage ....................... 1.500V
    DRAM Termination ................... 0.750v
    Ch-A Data VRef. .................... 0.750v
    Ch-B Data VRef. .................... 0.750v
    Ch-C Data VRef. .................... 0.750v
    Ch-A Address VRef. ................. 0.750v
    Ch-B Address VRef. ................. 0.750v
    Ch-C Address VRef. ................. 0.750v

    Hope that helps , If you need anymore info , Just ask

    Cheers
    Paul



  6. #36
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Settings for 3.8GHz overclock: i7-920, Gigabyte EX58-UD5 with latest F12 BIOS

    CPU Vcore .......................... 1.26250V if this is the amount normal uses then set dvid to +0.0925v (you might be able to lower later,or you might need to use more if unstable) = 1.355v total cpu voltage at load
    QPI/VTT Voltage .................... 1.175V,i would set to around 1.35v again you might be able to lower later on

    use a 21x200 bclk with turbo enabled
    use 8x ram multi=1600mhz ram speed
    use 17x uncore freq

    try those and see if you have any luck,keep an eye on cpu voltage and core temps under load ect
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  7. #37
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Settings for 3.8GHz overclock: i7-920, Gigabyte EX58-UD5 with latest F12 BIOS

    Quote Originally Posted by kingofleinster View Post
    Hi

    Thanks for the reply , I have the 920 chip , So do I Disable the turbo or leave it on , Sorry not sure what you mean in your config , I tried your setting with the Turbo on but the system would not boot .

    Cheers
    Paul
    Sorry for the confusion on that!!

    Some BIOSes differ in how that is handled, so it just depends on how your BIOS it setup. You want x21 CPU multi in the end, some BIOSes allow you to directly input that value, with turbo enabled, others only allow x20 and then you enable turbo for x21

  8. #38
    Join Date
    Jan 2011
    Location
    Ireland
    Posts
    9

    Default Re: Settings for 3.8GHz overclock: i7-920, Gigabyte EX58-UD5 with latest F12 BIOS

    Quote Originally Posted by wazza300 View Post
    CPU Vcore .......................... 1.26250V if this is the amount normal uses then set dvid to +0.0925v (you might be able to lower later,or you might need to use more if unstable) = 1.355v total cpu voltage at load
    QPI/VTT Voltage .................... 1.175V,i would set to around 1.35v again you might be able to lower later on

    use a 21x200 bclk with turbo enabled
    use 8x ram multi=1600mhz ram speed
    use 17x uncore freq

    try those and see if you have any luck,keep an eye on cpu voltage and core temps under load ect
    I'm afraid those settings didnt work , The machine wouldnt boot ???

    Any Ideas

  9. #39
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Settings for 3.8GHz overclock: i7-920, Gigabyte EX58-UD5 with latest F12 BIOS

    you just might need more cpu voltage for 4.2ghz,keep all the same except set dvid to +0.10000v which will give you 1.36250v total cpu voltage
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  10. #40
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Settings for 3.8GHz overclock: i7-920, Gigabyte EX58-UD5 with latest F12 BIOS

    Some CPU's may need 1.35-1.44+ to run 4.2Ghz, it all depends on your CPU. What was your actual stable idle and load voltages for the 3.8Ghz settings mentioned above?

    They may not matter, but it should give us a good idea of what you might need for 4.2Ghz. Did you try my suggested settings, or is the amount of Vcore needed the main issue for now so nothing will work until you find that?

Page 4 of 5 FirstFirst ... 2345 LastLast

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •