Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Gigabyte GA-X58A-UD3R running 12GB (HX3X12G1600C9) fails to post correctly at 1600MHz




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte GA-X58A-UD3R running 12GB (HX3X12G1600C9) fails to post correctly at 160

    Well what Bclk or CPU Speed do you think will be good for stock cooler, sorry never used one myself :)

    Try this for 3.28Gz using a lower CPU multi, ram at 1680

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ...........[21x]   << Set x19
    Intel(R) Turbo Boost Tech .[Enabled] << Disabled
    CPU Cores Enabled .........[All]
    CPU Multi Threading .......[Enabled]
    CPU Enhanced Halt (C1E) ...[Enabled] << Disabled
    C3/C6/C7 State Support ....[Disabled]
    CPU Thermal Monitor .......[Enabled]
    CPU EIST Function .........[Enabled]  << Disabled
    Virtualization Technology .[Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ....[Enabled]
    
    Uncore & QPI Features:
    QPI Link Speed .........[Auto] << Set x36 or X44 (X44 only for 168 Bclk - Must stay under 8Gt/s for ease of use)
    Uncore Frequency .......[Auto] (Always 2x memory Multi or 2x +1)   << Set 20-22
    Isonchronous Frequency .[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ...[Enabled]
    BCLK Frequency (MHz) ........[133]   << Set 168
    PCI Express Frequency (MHz) .[Auto]  << Set 100
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive .........[800mV]
    PCI Express Clock Drive .[900mV]
    CPU Clock Skew ..........[0ps]
    IOH Clock Skew ..........[0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ............[Standard]  << Try Turbo/Extreme, they seem to do better on X59 than standard
    Extreme Memory Profile (X.M.P) .[Profile1]  << Disabled
    System Memory Multiplier (SPD) .[10.0] (So it can boot properly)  = 1680
    DRAM Timing Selectable (SPD) ...[Auto]  << manual, expert, then set each channel main timings and tRFC CMD rate one by one
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time .9 
    tRCD .............9  
    tRP ..............9 
    tRAS .............24 
    
    Below values may be left in Auto if you like, generally this is fine.  For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread
    
    ##Channel A Advanced Timing Control##
    tRC ................41 [Auto] (Should be = tRAS + tRP or above for stability)
    tRRD ...............6  [Auto]
    tWTR ...............6  [Auto] (Must be Write to Read Delay/Same Rank - (tWL + 4)
    tWR ................12 [Auto]
    tWTP ...............24 [Auto] (tWTP Must = tWR + tWL + 4)
    tWL ................8  [Auto] (tWL Must be CAS Latency -1)
    tRFC ...............88 [Auto]   <<< Set 92 for now
    tRTP ...............6  [Auto]
    tFAW ...............30 [Auto]
    Command Rate (CMD) .2  [Auto]  << Set 1T
    
    ##Channel A Misc Timing Control##
    Round Trip Latency .57 [Auto]
    B2B CAS Delay ......-  [Auto]
    
    Channel B Timing Settings:
    ##Channel B Standard Timing Control##
      Same as Channel A
    
    ##Channel B Advanced Timing Control##
      Same as Channel A
    
    ##Channel B Misc Timing Control##
    Round Trip Latency .58 [Auto]
    B2B CAS Delay ......-  [Auto]
    
    Channel C Timing Settings:
    ##Channel C Standard Timing Control##
      Same as Channel A
    
    ##Channel C Advanced Timing Control##
      Same as Channel A
      
    ##Channel C Misc Timing Control##
    Round Trip Latency .60 [Auto]
    B2B CAS Delay ......-  [Auto]
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ...[Standard]  << Level 1
    CPU Vcore       1.28750v.[Auto]  << Set 1.34-1.38
    QPI/VTT Voltage 1.150v ..[Auto]  << Set 1.3-1.35
    CPU PLL         1.800v ..[Auto]
    
    MCH/ICH
    PCIE     1.500v .[Auto]
    QPI PLL  1.100v .[Auto]  << Set 1.16-1.2
    IOH Core 1.100v .[Auto] 
    ICH I/O  1.500v .[Auto]
    ICH Core 1.1v ...[Auto]
    
    DRAM
    DRAM Voltage       1.500v [Auto]  << Set 1.6-1.62 (rated voltage)
    DRAM Termination   0.750v [Auto]
    Ch-A Data VRef.    0.750v [Auto]
    Ch-B Data VRef.    0.750v [Auto]
    Ch-C Data VRef.    0.750v [Auto]
    Ch-A Address VRef. 0.750v [Auto]
    Ch-B Address VRef. 0.750v [Auto]
    Ch-C Address VRef. 0.750v [Auto]

  2. #12
    Join Date
    May 2010
    Location
    London
    Posts
    5

    Default Re: Gigabyte GA-X58A-UD3R running 12GB (HX3X12G1600C9) fails to post correctly at 160

    Hi Guys,

    I tried both your settings and got the reboot and then the board downgraded the memory speed to 1066. I haven't tried the maximum volt ranges you suggested Lsdmeasap, but the minimum ones haven't worked so far. I will give the maximum volt ranges ago and see what happens, but I am not that hopeful.

    Do you know anyone with my combination of RAM and motherboard that have managed to get this working correctly?

    Thanks
    Grant

  3. #13
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Gigabyte GA-X58A-UD3R running 12GB (HX3X12G1600C9) fails to post correctly at 160

    you might do better with a better cooler as i know it gets very hot when you go above 1.2v on the cpu and stock cooler same for qpi voltages,this maybe why its failing
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  4. #14

    Default Re: Gigabyte GA-X58A-UD3R running 12GB (HX3X12G1600C9) fails to post correctly at 160

    Just letting you know Judge, I have even ran mixed kits at 1600 without issue.
    you are lucky then i tryed and help a frend try it it would boot just fine at 1333 for me just not 1600
    good luck hope he works it out

    i also think it has to do with brand of memory as well some inchange better then others
    Intel Core i7-980X Extreme Edition Gulftown cooled By Swiftech APOGEE GTZ CPU waterblock
    Gigabyte GA-X58A-UD9 Water Cooled
    Corsair Dominator 12GB (6 x 2GB) Model CMD12GX3M6A1600C8
    2 Gigabyte GTX 480 in SLI
    6 Western Digital VelociRaptor WD1500HLFS 150GB 10000 RPM in Raid 0
    2 Plextor sata Blu_ray Drives Model PX-B320SA
    Ultra X4 1200 Watt
    Thermaltake Armor+Thermaltake Bigwater 760 IS
    Creative Sound Blaster X-Fi Titanium Fatal1ty Champion
    Creative Gigaworks 750S 7.1 Suround 700 watt
    Windows 7 Ultimate 64 bit

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte GA-X58A-UD3R running 12GB (HX3X12G1600C9) fails to post correctly at 160

    Try the higher values I suggested and you should have some luck, that is why I posted a range so you could start with higher and work your way down.

    What did the lower values do, how did they fails BSOD or just not boot to windows or what?

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •