Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz




  1. #1
    Join Date
    May 2010
    Location
    planet earth
    Posts
    7

    Smile OVERCLOCK HELP: Gigabyte GA-X58A-UD3R (rev. 1.0) - i7 930 - Gskill 3x 2GB 1600 MHz

    hi guys!! this is my first i7 oc..so please help me with my i7 930! i'd really appreciate it.
    my target OC is 4.0 GHZ 24/7


    My system:


    CPU: Intel i7 930 D0

    Cooling: Cooler Master 212 Plus

    Mobo: Gigabyte GA-X58A-UD3R (rev. 1.0)

    Memory: G.SKILL Ripjaws Series 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL8T-6GBRM

    GPU: MSI R5770 Hawk Radeon HD 5770

    HDDs: Western Digital Caviar Black WD1001FALS 1TB 7200 RPM 32MB Cache SATA 3.0Gbs

    PSU: Cooler Master Real Power Pro M850 RS-850-ESBA





    thanks for your time guys!!!
    Gyga
    Last edited by GYGA; 06-07-2010 at 05:01 AM.

  2. #2
    Join Date
    May 2010
    Location
    United Kingdom
    Posts
    33

    Default Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

    You may refer to this forumer's o/c profile.

  3. #3
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

    here are my settings for 4.2 that I use for 24/7 use. Im under water so they may not work for you but it may help.... If you try the settings above or mine and have a problem with them post back with the current settings that failed. To test your settings use either Prim95 or LinX.

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [21x]
    Intel(R) Turbo Boost Tech .................. [Disabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Disabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Enabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Disabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... 18 (Always 2x memory Multi or 2x +1)
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... 200
    PCI Express Frequency (MHz) ........... [100]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [8]
    DRAM Timing Selectable (SPD) .......... [Manual]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 8
    tRCD ....................................... 8
    tRP ......................................... 8
    tRAS ....................................... 20
    
    Below values may be left in Auto if you like, generally this is fine.  For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread
    
    ##Channel A Advanced Timing Control##
    tRC ........................................ [Auto] (Should be = tRAS + tRP or above for stability)
    tRRD ....................................... [Auto]
    tWTR ...................................... [Auto] (Must be Write to Read Delay/Same Rank - (tWL + 4)
    tWR ........................................ [Auto]
    tWTP ....................................... [Auto]   (tWTP Must = tWR + tWL + 4)
    tWL ........................................ [Auto]    (tWL Must be CAS Latency -1)
    tRFC ....................................... [Auto]
    tRTP ....................................... [Auto]
    tFAW ...................................... [Auto]
    Command Rate (CMD) ................ T1
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ................... [Auto]
    
    B2B CAS Delay .......................... [Auto]
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Enabled]
    CPU Vcore 1.25000 ..................... [1.4125]
    Dvid .................................. + 0.0000
    QPI/VTT Voltage 1.150v ............ 1.375
    CPU PLL 1.800v ....................... 1.8000
    
    MCH/ICH
    PCIE 1.500v ........................... 1.5
    QPI PLL 1.100v ....................... 1.1
    IOH Core 1.100v ..................... 1.16
    ICH I/O 1.500v ....................... [Auto]
    ICH Core 1.1v ........................ [Auto]
    
    DRAM
    DRAM Voltage 1.500v .............. 1.66
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  4. #4
    Join Date
    May 2010
    Location
    planet earth
    Posts
    7

    Post Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

    Quote Originally Posted by onemilimeter View Post
    You may refer to this forumer's o/c profile.
    Quote Originally Posted by Acebmxer View Post
    here are my settings for 4.2 that I use for 24/7 use. Im under water so they may not work for you but it may help.... If you try the settings above or mine and have a problem with them post back with the current settings that failed. To test your settings use either Prim95 or LinX.

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [21x]
    Intel(R) Turbo Boost Tech .................. [Disabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Disabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Enabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Disabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]
     
     
    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... 18 (Always 2x memory Multi or 2x +1)
    Isonchronous Frequency ..................[Enabled]
     
     
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... 200
    PCI Express Frequency (MHz) ........... [100]
     
    C.I.A.2 [Disabled]
     
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
     
     
    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [8]
    DRAM Timing Selectable (SPD) .......... [Manual]
     
    Channel A + B + C
     
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 8
    tRCD ....................................... 8
    tRP ......................................... 8
    tRAS ....................................... 20
     
    Below values may be left in Auto if you like, generally this is fine.  For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread
     
    ##Channel A Advanced Timing Control##
    tRC ........................................ [Auto] (Should be = tRAS + tRP or above for stability)
    tRRD ....................................... [Auto]
    tWTR ...................................... [Auto] (Must be Write to Read Delay/Same Rank - (tWL + 4)
    tWR ........................................ [Auto]
    tWTP ....................................... [Auto]   (tWTP Must = tWR + tWL + 4)
    tWL ........................................ [Auto]    (tWL Must be CAS Latency -1)
    tRFC ....................................... [Auto]
    tRTP ....................................... [Auto]
    tFAW ...................................... [Auto]
    Command Rate (CMD) ................ T1
     
    ##Channel A Misc Timing Control##
    Round Trip Latency ................... [Auto]
     
    B2B CAS Delay .......................... [Auto]
     
     
    Advanced Voltage Control:
     
    CPU
    Load Line Calibration ................. [Enabled]
    CPU Vcore 1.25000 ..................... [1.4125]
    Dvid .................................. + 0.0000
    QPI/VTT Voltage 1.150v ............ 1.375
    CPU PLL 1.800v ....................... 1.8000
     
    MCH/ICH
    PCIE 1.500v ........................... 1.5
    QPI PLL 1.100v ....................... 1.1
    IOH Core 1.100v ..................... 1.16
    ICH I/O 1.500v ....................... [Auto]
    ICH Core 1.1v ........................ [Auto]
     
    DRAM
    DRAM Voltage 1.500v .............. 1.66
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]



    thanks a lot guys!! really appreciate it!! thansk for ur time!! I'll see how it works..

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

    Let us know how you get along, if you have issues please give us the full settings you are trying and we will advise back.

    FYI

    BSOD Error codes and what they mean:
    0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
    0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
    0X00000101 << Not enough Vcore Voltage


    Good luck tweaking!

  6. #6
    Join Date
    May 2010
    Location
    planet earth
    Posts
    7

    Default Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

    hi guys!! here is my setpoint to 3.3 with standard cooler ... because my 212 plus has a broken screw I tested with IntelBurnTestV2 in high mode= pass please!! let me know if everything is fine!!


    thanks a lot!! for ur time guys!!




    Advanced CPU Features:
    CPU Clock Ratio ................................ [21x]
    Intel(R) Turbo Boost Tech .................. [Disabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Enabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Disabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... 3200
    Isonchronous Frequency ..................[Enabled]


    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... 160
    PCI Express Frequency (MHz) ........... [100]


    C.I.A.2 [Disabled]
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [10]
    DRAM Timing Selectable (SPD) .......... [Quick]


    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 8
    tRCD ....................................... 8
    tRP ......................................... 8
    tRAS ....................................... 24

    the other memory parameters set to (AUTO)


    Advanced Voltage Control:
    CPU
    Load Line Calibration ................. [standard]
    CPU Vcore 1.25000 ..................... [1.2000]

    the other parameters set to (Normal)


    DRAM
    DRAM Voltage 1.500v .............. 1.60


    the other parameters set to (Normal)


    Attachment 2588

  7. #7
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

    looks ok to me,what qpi/vtt voltages did you use? have you tried lowering cpu voltage to 1.18750v? tried without llc?
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  8. #8
    Join Date
    May 2010
    Location
    planet earth
    Posts
    7

    Default Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

    Quote Originally Posted by wazza300 View Post
    looks ok to me,what qpi/vtt voltages did you use? have you tried lowering cpu voltage to 1.18750v? tried without llc?

    hi Wazza! QPI/VTT set to Normal.. only vcore.. dram and pci voltages .. manually configured.. rest set to Normal!!

    i set vcore to 1.8750!! and test with intelburntest in high mode.. pass!!!

    thank very much Wazza

    I think buy the Corsair H50 to 4.0 4.2 for the price... is the best investment? any suggestions?


    thanks!!!

  9. #9
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

    there ok the h50 but have been known to leak,the coolit domino is worse for leaking,good air coolers are prolematech megahalems and the thermalright true ultra 120,if you go for an h50 be carefull when you install it,dont put any pressure or allow the cpu hoses to twist
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  10. #10
    Join Date
    May 2010
    Location
    planet earth
    Posts
    7

    Default Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

    Quote Originally Posted by wazza300 View Post
    there ok the h50 but have been known to leak,the coolit domino is worse for leaking,good air coolers are prolematech megahalems and the thermalright true ultra 120,if you go for an h50 be carefull when you install it,dont put any pressure or allow the cpu hoses to twist


    thansk again Wazza! thanks for the tip!!

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •