Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 7 of 7

Thread: Gigabyte GA-EP45-UD3P - Wont boot on Dual Memory !




  1. #1
    Join Date
    Dec 2008
    Posts
    13

    Red face Gigabyte GA-EP45-UD3P - Wont boot on Dual Memory !

    Hello
    This is my spec

    Gigabyte GA-EP45-UD3P
    Gigabyte HD5850
    Intel Core2Quad Q9400s @ 2.66Ghz (Default)
    Seagate 7200.12 500GB
    Patriot 2x2GB 1066Mhz 5-5-5-15 2.1V Memory | Here |
    Enlight Black Silver 600W
    XSPC Pump + Resevoir, Thermaltake TMG 1 12x1 Radiator


    I have upgraded my Bios to latest, but still same problem
    It wont boot on 2 stick memory (Slot1 and Slot3), No beep, no post, just restart continously.


    I changed Bios to Manual (Other than this, is Auto)


    PCI Express Frequency (Mhz) ---------- : [100] <--- Set to 100, never leave this on Auto

    Standard Timing Control
    CAS Latency Time -------- 5 ---------- : 5
    tRCD ------------------- 7 ---------- : 5
    tRP --------------------- 7 ---------- : 5
    tRAS ------------------- 20 ---------- : 15

    MCH/ICH
    MCH Core ---------------- 1.100V ------- :
    1.200
    MCH Reference ----------- 0.760V ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900V ------ : [Auto]
    ICH I/O ----------------- 1.500V ------- : [Auto]
    ICH Core ---------------- 1.100V ------- : [Auto]
    DRAM
    DRAM Voltage ------------ 1.800V ------- :
    2.1V < NORMAL VOLTAGE
    DRAM Termination -------- 0.900V ------- : [Auto]
    Channel A Reference ----- 0.900V ------- : [Auto]
    Channel B Reference ----- 0.900V ------- : [Auto]



    But there are a beeps (23 Times and restart) this time.....

  2. #2
    Join Date
    Dec 2008
    Posts
    13

    Default Re: Gigabyte GA-EP45-UD3P - Wont boot on Dual Memory !

    anyone please

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte GA-EP45-UD3P - Wont boot on Dual Memory !

    This is caused by incorrect tRD (Static tRead Value), set too tight (Low) by auto normally

    Set each channel tRD manually, if you are using 333 FSB try 7-8 for now, if you are using 400+ FSB try 9

    Also put performance enhance on standard, and you may need 1.24 MCH, but what you are using now could be fine the beeps will stop once you set tRD looser as I suggested.

    If you can't get into the BIOS with both sticks to do this, use one stick and then set these and save/apply F10 and reboot to windows then shut down and put in the second stick

  4. #4
    Join Date
    Dec 2008
    Posts
    13

    Default Re: Gigabyte GA-EP45-UD3P - Wont boot on Dual Memory !

    Thanks , LSDMEASAP !
    Its work !

    This is 2nd times that you help me !
    U are truly hero :)

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte GA-EP45-UD3P - Wont boot on Dual Memory !

    Nice to see you got it going!!

    Post back anytime if you need help optimizing things

  6. #6
    Join Date
    Dec 2008
    Posts
    13

    Default Re: Gigabyte GA-EP45-UD3P - Wont boot on Dual Memory !

    Hello, lsdmeasap
    i changed tRD to 8 and all setting is default, its work on 4GB now ,but when i play The Sims 3, sometime PC will shutdown, just shutdown like no power or not responding

    THanks

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte GA-EP45-UD3P - Wont boot on Dual Memory !

    Please give me your full BIOS settings in a template and I will advise back.

    Is it only that one game, or do others give you issues too? Just wondering if it is maybe this game itself, or drivers for it or your GFX card, ect and not just your settings.

    Test other games if you are not sure.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •