Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: HELP - Stable System at 3.6 Ghz




  1. #1
    Join Date
    Apr 2010
    Location
    Portugal
    Posts
    5

    Default HELP - Stable System at 3.6 Ghz

    Hello, first of all let me congratulate you for the precious material out there in the forum. Sure it's has made good things for the PEOPLE.

    I'm new to overclock, and since i bought my new computer i wish to overclok it, and so i am attempting to reach a full stable 3.6 Ghz overclok and i'm counting on your help to do that. Below there my bios and system settings:


    Advanced CPU Features:
    CPU Clock Ratio ................................ [19x]
    Intel(R) Turbo Boost Tech .................. [Disabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Disabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... x18
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................160
    PCI Express Frequency (MHz) ........... [100]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo]
    Extreme Memory Profile (X.M.P) ......... [Disabled]<<dont have this feature
    System Memory Multiplier (SPD) ........ [8]
    DRAM Timing Selectable (SPD) .......... [Manual]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................9
    tRCD .......................................9
    tRP .........................................9
    tRAS .......................................28


    ##Channel A Advanced Timing Control##
    tRC ........................................<<
    <<dont have this feature
    tRRD .......................................<<<<dont have this feature
    tWTR ...................................... <<<<dont have this feature
    tWR ........................................<<<<dont have this feature
    tWTP .......................................<<<<dont have this feature
    tWL ........................................<<<<dont have this feature
    tRFC .......................................<<<<dont have this feature
    tRTP .......................................<<<<dont have this feature
    tFAW ...................................... <<<<dont have this feature

    Command Rate (CMD) ................Auto

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................<<
    <<dont have this feature

    B2B CAS Delay ..........................<<
    <<dont have this feature


    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ...............................1.2
    QPI/VTT Voltage 1.150v ............1.2
    CPU PLL 1.800v .......................1.8

    MCH/ICH
    PCIE 1.500v ...........................1.5
    QPI PLL 1.100v .......................1.1
    IOH Core 1.100v .....................1.1
    ICH I/O 1.500v .......................1.5
    ICH Core 1.1v ........................1.1

    DRAM
    DRAM Voltage 1.500v ..............1.64
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

    Attachment 2586

    Now im running at 3 Ghz but i'd like to achive 3.6. With my current settings i manage to run prime for 3 hours.

    Do you sugest any changes? what should i do next?

    Thanks in advance

  2. #2
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: HELP - Stable System at 3.6 Ghz

    just try with 1.3---1.32v for qpi voltage everything else looks ok,try my oc settings in sig if you want just set bclk to 160 instead of 180,all voltages will be ok
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  3. #3
    Join Date
    Apr 2010
    Location
    Portugal
    Posts
    5

    Default Re: HELP - Stable System at 3.6 Ghz

    Hello wazza300,

    Thanks for the reply, i'll try your settings soon as i can and i'll keep you informed.

    Thank you!

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: HELP - Stable System at 3.6 Ghz

    You do have ALL those advanced memory options you say you don't have, they are just on another page you have to click enter to get into.

    What cooler are you using? Can you also give us a link to your memory

  5. #5
    Join Date
    Apr 2010
    Location
    Portugal
    Posts
    5

    Default Re: HELP - Stable System at 3.6 Ghz

    Hello again :)

    finaly i had some time to test my system with your settings wazza300, but it went bad. First, on prime, i had a BSOD with the error 0x0000003B than i raised Vcore a litle bit and this time i have a 0x00000101 error. I raised my Vcore again but i was getting high temperatures :(.

    Since my goal is to reach a stable 3.6 Ghz i made some tests and yesterday my computer was 6 hours on prime, blend test, without errors but i notest something weird, the first 3 hours the cpu was on full load, than i left home and when i came back it was on 86% load. Is this normal?

    Anyway my settings right now are this :

    Advanced CPU Features:
    CPU Clock Ratio ................................ [19x]
    Intel(R) Turbo Boost Tech .................. [Disabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Disabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... x18
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................190
    PCI Express Frequency (MHz) ........... [100]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [8]
    DRAM Timing Selectable (SPD) .......... [Manual]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................9
    tRCD .......................................9
    tRP .........................................9
    tRAS .......................................28


    ##Channel A Advanced Timing Control##
    tRC ........................................Auto
    tRRD .......................................Auto
    tWTR ...................................... Auto
    tWR ........................................Auto
    tWTP .......................................Auto
    tWL ........................................Auto
    tRFC .......................................Auto
    tRTP .......................................Auto
    tFAW ...................................... Auto

    Command Rate (CMD) ................1

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................

    B2B CAS Delay ..........................

    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ...............................1.2
    QPI/VTT Voltage 1.150v ............1.3
    CPU PLL 1.800v .......................1.8

    MCH/ICH
    PCIE 1.500v ...........................1.5
    QPI PLL 1.100v .......................1.1
    IOH Core 1.100v .....................1.1
    ICH I/O 1.500v .......................1.5
    ICH Core 1.1v ........................1.1

    DRAM
    DRAM Voltage 1.500v ..............1.66
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

    Attachment 2589

    Lsdmeasap
    Re: HELP - Stable System at 3.6 Ghz
    You do have ALL those advanced memory options you say you don't have, they are just on another page you have to click enter to get into.

    What cooler are you using? Can you also give us a link to your memory
    Hello Lsdmeasap,

    Yes i have that options lol, i dont know why i didnt see them, now i have them in auto. I have a Corsair Hydro H50 cooler. Here is a link to my memory OCZ DDR3 PC3-15000 Reaper CL9 Edition Low-Voltage Triple Channel OCZ Technology.

    Thanks a lot for the help. For what i have seen i'm beeing helped by 2 experienced guys :).

    Do you suggest any changes?


    PS- Sorry about my english, it's a portuguenglish lol (i'm from Portugal).
    Another thing i forgot to mention, while in BIOS i click Ctrl+F1 and some new things appeared like the spred spectrum wich i disable it. Is this ok?

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: HELP - Stable System at 3.6 Ghz

    BSOD 101 means you need more vcore

    Your English is fine, I didn't even know.

    Spread Spectrum can be disabled if you want, here is some more info on what it is
    Spread spectrum - Wikipedia, the free encyclopedia

    Also tons of other answers on this here if you wanna read everyone else thoughts about it
    CPU Spread Spectrum - Google Search

    Your settings look ok to me, you might be able to use less QPI/Vtt at those speeds/timings.

  7. #7
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: HELP - Stable System at 3.6 Ghz

    you said your cpu was on 100% load then 86% load?? did you look in prime95 to see if any workers(cpu stress programs for each thread) had stopped? this will reduce load percentages if one or two had
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  8. #8
    Join Date
    Apr 2010
    Location
    Portugal
    Posts
    5

    Default Re: HELP - Stable System at 3.6 Ghz

    Hello :)

    Lsdmeasap
    Re: HELP - Stable System at 3.6 Ghz
    BSOD 101 means you need more vcore

    Your English is fine, I didn't even know.

    Spread Spectrum can be disabled if you want, here is some more info on what it is
    Spread spectrum - Wikipedia, the free encyclopedia

    Also tons of other answers on this here if you wanna read everyone else thoughts about it
    CPU Spread Spectrum - Google Search

    Your settings look ok to me, you might be able to use less QPI/Vtt at those speeds/timings.
    Hello Lsdmeasap,

    How much should i decrease QPI/Vtt, when do i know it's giving me problems?

    What do you think about my temperatures?

    Thanks!

    you said your cpu was on 100% load then 86% load?? did you look in prime95 to see if any workers(cpu stress programs for each thread) had stopped? this will reduce load percentages if one or two had
    Hello Wazza300,

    Yes i did look to prime95 and all workers seemed fine, it's strange... When i get a chance i'll run prime again.

    Do you suggest another thing to do?

    Thank you.

  9. #9
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: HELP - Stable System at 3.6 Ghz

    run a blend test in prime 95,lower qpi one/two clicks a time n do a test it will fail pretty quick if its not enough
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: HELP - Stable System at 3.6 Ghz

    When QPI/Vtt is too low you will get BSOD 0x00000124 then you know you set it too low and to raise it back up a few notches.

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •