Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: X58-UD3R Rev 1.6 & 920 D0 @ 4Ghz [*FAIL*]




  1. #11
    Join Date
    Jun 2010
    Location
    Israel
    Posts
    19

    Default Re: X58-UD3R Rev 1.6 & 920 D0 @ 4Ghz [*FAIL*]

    Finally (the evil BSOD 124 was related with vcore) i managed to do 4Ghz with 1.28 QPI and 1.33vCore (1.27 @ Full LOAD), 25 loops of linx stable, 75c max temp but i think i will stick with 3.8Ghz & 1.21vcore @ full load, at least until i switch to a proper water cooling. I don't like to stay above of 70 degrees.
    MB: Gigabyte G1.Sniper 3 BIOS F8i <> CPU: 2700K@4.70Ghz 1.30v <> Cooling: H100i + 4x Cougar V12HP 1500RPM <> RAM: G.Skill RipjawsZ 2x4GB 2400Mhz @ 2133Mhz 9-11-11-31 1T -1.60v- <> Monitor: Dell U2711 <> VGA: HD7970 @ 1200/6800 [1.16v + Accelero Xtreme 7970] <> HDDs: 2x1TB Samsung SP F3 + 2x Crucial M4 256GB @ RAID-0 <> Case: CM HAF-X <> PSU: Seasonic Platinum 1KW

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: X58-UD3R Rev 1.6 & 920 D0 @ 4Ghz [*FAIL*]

    Nice to see you found the cause!

    Sorry I didn't mention it earlier, or more often so others notice that, but it's not normally vcore related so i rarely have to mention it.

  3. #13
    Join Date
    Jun 2010
    Location
    Israel
    Posts
    19

    Default Re: X58-UD3R Rev 1.6 & 920 D0 @ 4Ghz [*FAIL*]

    Quote Originally Posted by Lsdmeasap View Post
    Nice to see you found the cause!

    Sorry I didn't mention it earlier, or more often so others notice that, but it's not normally vcore related so i rarely have to mention it.
    Yea well, i followed every possible guide and it states everywhere that BSOD 124 is related with VTT/QPI voltage, problably my case is rare one, gladly it wasnt a problem with the motherboard nor the cpu.

    Next week i will get a decent WC setup, after that i will post my results.
    MB: Gigabyte G1.Sniper 3 BIOS F8i <> CPU: 2700K@4.70Ghz 1.30v <> Cooling: H100i + 4x Cougar V12HP 1500RPM <> RAM: G.Skill RipjawsZ 2x4GB 2400Mhz @ 2133Mhz 9-11-11-31 1T -1.60v- <> Monitor: Dell U2711 <> VGA: HD7970 @ 1200/6800 [1.16v + Accelero Xtreme 7970] <> HDDs: 2x1TB Samsung SP F3 + 2x Crucial M4 256GB @ RAID-0 <> Case: CM HAF-X <> PSU: Seasonic Platinum 1KW

  4. #14
    Join Date
    Jun 2010
    Location
    Israel
    Posts
    19

    Default Re: X58-UD3R Rev 1.6 & 920 D0 @ 4Ghz [*FAIL*]

    One quick question, i managed to do 3.9Ghz with 1.26vcore @ Full load (linx) and 1.28qpi.
    Are my temps safe ?

    42-44 @ Idle - 72-74 @ Full

    Any risk to damage the board or the cpu ?. Another question btw, shall i enable the energy saving features such as Intel SpeedStep, will they affect my OC ?.



    Uploaded with ImageShack.us
    MB: Gigabyte G1.Sniper 3 BIOS F8i <> CPU: 2700K@4.70Ghz 1.30v <> Cooling: H100i + 4x Cougar V12HP 1500RPM <> RAM: G.Skill RipjawsZ 2x4GB 2400Mhz @ 2133Mhz 9-11-11-31 1T -1.60v- <> Monitor: Dell U2711 <> VGA: HD7970 @ 1200/6800 [1.16v + Accelero Xtreme 7970] <> HDDs: 2x1TB Samsung SP F3 + 2x Crucial M4 256GB @ RAID-0 <> Case: CM HAF-X <> PSU: Seasonic Platinum 1KW

  5. #15
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: X58-UD3R Rev 1.6 & 920 D0 @ 4Ghz [*FAIL*]

    no temps are fine,keep below 80c if you can maybe 82c max you wont damage anything the mb/cpu safety features will shut down pc before it gets hot enough to damage cpu,you can use eist and c1e if you want,it doesnt affect my oc maybe disable if your 4ghz+,if your running windows 7 then disable c1e in the bios and use windows7 power saving profile(select balanced) it will do same job as c1e but is better imo
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •