Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 5 of 6 FirstFirst ... 3456 LastLast
Results 41 to 50 of 57

Thread: GA Ep45-DS3 and OCZ 2x2GB PC28500/1066Mhz Reaper or OCZ 2x2GB PC26400/800Mhz Reaper




  1. #41
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    28

    Default Re: GA Ep45-DS3 and OCZ 2x2GB PC28500/1066Mhz Reaper or OCZ 2x2GB PC26400/800Mhz Reap

    I change the MCH core to = 1.05 but it seems my memset still shows 5-7-7-20 for the RAM timing settings.. What should i do?

    This is my current settings

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3ghz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 3.20B
    Memory Frequency (Mhz) ..............: 1066
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD ......................................... 5
    tRP'........................................... 5
    tRAS.......................................... 15

    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go

    Advanced Timing Control
    tRRD........................................... 4
    tWTR.......................................... 4
    tWR............................................ 12
    tRFC........................................... 68
    tRTP........................................... 4
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................ 1066

    Channel A
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................: 9
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control

    CPU
    CPU Vcore….……….........................:1.225v(Auto)

    CPU Termination….......................:1.220v(no 1.225v option that you suggested, so i set this to 1.220v) Please advice if i am wrong

    CPU PLL…………………....1.500V*.......: Auto

    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly

    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly


    MCH/ICH
    MCH Core…………….....1.100V...........: change to 1.05
    MCH Reference….…….0.800V...........; change to Auto
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.500V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.1
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled]
    Gigabyte GA-EP45-DS3 Rev A2 Bios:F10d
    Intel Core 2 Duo E8400 @ 3.00 Ghz
    CPU cooler: Xigmatek S1283 Dark Knight
    Current OS: Windows 7 Nvidia Edition 32 bit
    RAM: 2x2GB G.Skill F2-8500CL5D-4GBPK (2x2GB) DDR2
    Graphic card: Asus NVIDIA GeForce EN 9800 GTX+, 512M DDR3 Dark Knight Version
    PSU: SilverStone Strider 600W PSU
    MainHD: 2X Samsung 500 GB NTFS HardDisk
    ExternalHD: 2TB Samsung Story NTFSHD (Main movie storage, always connected)
    : 1TB Seagate Desktop NTFSHD (Secondary movie storage, always connected)
    : 1 TB Lacie NTFS HD (only connected when needed)
    Altec Lancing 5.1 Speakers
    Logitech Wave Keyboard
    Razer Lachesis Mouse
    PC Case: Antec 300
    Fan: 2 Coolermaster Fan for intake at the front, 1 exhaust on top and back

  2. #42
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: GA Ep45-DS3 and OCZ 2x2GB PC28500/1066Mhz Reaper or OCZ 2x2GB PC26400/800Mhz Reap

    If overclocking was that simple, there would be no need for this forum.
    You can't overclock until your system is stable at stock speeds, and you've run extended stability tests, otherwise you risk possible file/data corruption, BSODs, of system lockups.
    Right now, your system isn't able to apply your current bios settings.
    Given you current temperatures, you shouldn't overclock until you have some initial temperature benchmarks while gaming, or running multiple demanding programs.
    Patience....
    ....you've got to crawl before you walk, and walk before you run.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  3. #43
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    28

    Default Re: GA Ep45-DS3 and OCZ 2x2GB PC28500/1066Mhz Reaper or OCZ 2x2GB PC26400/800Mhz Reap

    Gigabyte GA-EP45-DS3 Rev A2 Bios:F10d
    Intel Core 2 Duo E8400 @ 3.00 Ghz
    CPU cooler: Xigmatek S1283 Dark Knight
    Current OS: Windows 7 Nvidia Edition 32 bit
    RAM: 2x2GB G.Skill F2-8500CL5D-4GBPK (2x2GB) DDR2
    Graphic card: Asus NVIDIA GeForce EN 9800 GTX+, 512M DDR3 Dark Knight Version
    PSU: SilverStone Strider 600W PSU
    MainHD: 2X Samsung 500 GB NTFS HardDisk
    ExternalHD: 2TB Samsung Story NTFSHD (Main movie storage, always connected)
    : 1TB Seagate Desktop NTFSHD (Secondary movie storage, always connected)
    : 1 TB Lacie NTFS HD (only connected when needed)
    Altec Lancing 5.1 Speakers
    Logitech Wave Keyboard
    Razer Lachesis Mouse
    PC Case: Antec 300
    Fan: 2 Coolermaster Fan for intake at the front, 1 exhaust on top and back

  4. #44
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    28

    Default Re: GA Ep45-DS3 and OCZ 2x2GB PC28500/1066Mhz Reaper or OCZ 2x2GB PC26400/800Mhz Reap

    Hi profJim,

    Ya.. thanks for the advice. I should concentrate on stabilizing my system first... I won't oc thought until i bought new Case and cpu cooler :D

    Please advice me on my current settings please, i still receive the red warning box even though i have change the Mch core to 1.05 v. I post my settings on my post above.

    Cheers
    Gigabyte GA-EP45-DS3 Rev A2 Bios:F10d
    Intel Core 2 Duo E8400 @ 3.00 Ghz
    CPU cooler: Xigmatek S1283 Dark Knight
    Current OS: Windows 7 Nvidia Edition 32 bit
    RAM: 2x2GB G.Skill F2-8500CL5D-4GBPK (2x2GB) DDR2
    Graphic card: Asus NVIDIA GeForce EN 9800 GTX+, 512M DDR3 Dark Knight Version
    PSU: SilverStone Strider 600W PSU
    MainHD: 2X Samsung 500 GB NTFS HardDisk
    ExternalHD: 2TB Samsung Story NTFSHD (Main movie storage, always connected)
    : 1TB Seagate Desktop NTFSHD (Secondary movie storage, always connected)
    : 1 TB Lacie NTFS HD (only connected when needed)
    Altec Lancing 5.1 Speakers
    Logitech Wave Keyboard
    Razer Lachesis Mouse
    PC Case: Antec 300
    Fan: 2 Coolermaster Fan for intake at the front, 1 exhaust on top and back

  5. #45
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: GA Ep45-DS3 and OCZ 2x2GB PC28500/1066Mhz Reaper or OCZ 2x2GB PC26400/800Mhz Reap

    When you post your current bios settings, also include a single screen-shot as you did in post #26. Also include CoreTemp display in the screen-shot.
    In many threads, the posted bios settings don't match the values in the screen-shot and we can quickly spot some errors.
    Please add a detailed hardware list to your forum signature, similar to mine. Color isn't necessary.

    If increasing CPU Vcore one or two steps doesn't help, change your System Memory Multiplier to 2.40B for 800MHz memory speeds and try MCH Core values from 0.95 - 1.15 volts.
    Once your system is stable with 800MHz, we can switch back to 1066MHz.
    There isn't a lot of difference between 800MHz with 4-4-4-12 timings and 1066MHz with 5-5-5-15 settings.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  6. #46
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    28

    Default Re: GA Ep45-DS3 and OCZ 2x2GB PC28500/1066Mhz Reaper or OCZ 2x2GB PC26400/800Mhz Reap

    Hi profJim,

    I did post the screenie of cpuz,tunner,cpuz-spd,memset at post #43. I will add the core temp here. I think i have added most of my hardware list at my signature...

    I will try changing the system memory multiplier now and see how it goes.

    Gigabyte GA-EP45-DS3 Rev A2 Bios:F10d
    Intel Core 2 Duo E8400 @ 3.00 Ghz
    CPU cooler: Xigmatek S1283 Dark Knight
    Current OS: Windows 7 Nvidia Edition 32 bit
    RAM: 2x2GB G.Skill F2-8500CL5D-4GBPK (2x2GB) DDR2
    Graphic card: Asus NVIDIA GeForce EN 9800 GTX+, 512M DDR3 Dark Knight Version
    PSU: SilverStone Strider 600W PSU
    MainHD: 2X Samsung 500 GB NTFS HardDisk
    ExternalHD: 2TB Samsung Story NTFSHD (Main movie storage, always connected)
    : 1TB Seagate Desktop NTFSHD (Secondary movie storage, always connected)
    : 1 TB Lacie NTFS HD (only connected when needed)
    Altec Lancing 5.1 Speakers
    Logitech Wave Keyboard
    Razer Lachesis Mouse
    PC Case: Antec 300
    Fan: 2 Coolermaster Fan for intake at the front, 1 exhaust on top and back

  7. #47
    Join Date
    May 2010
    Location
    -
    Posts
    110

    Default Re: GA Ep45-DS3 and OCZ 2x2GB PC28500/1066Mhz Reaper or OCZ 2x2GB PC26400/800Mhz Reap

    If you use 2.1 Dram, higher MCH is needed, meaning, Dram cannot exceed MCH by much, not more than 0.7-0.8V... but it can't be too low. for reasons only the chipset knows.

    You keep seeing the red message bacuse you didn't load the optimised defaults, and then set all voltages to normal. If you touch a voltage it affects everything, especially the Termination, all references are connected to it. I think the motherboard doesn't like the 1.05V MCH core, and 2.1 memory combination much, in fact anything more than 2.02 V should be avoided, because it is a 65nm chip (and you probably know what 1.75 memory does to a 45nm chipset, it kills it). similar forces in work here.
    Last edited by yuu; 06-12-2010 at 04:02 PM.

  8. #48
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    28

    Default Re: GA Ep45-DS3 and OCZ 2x2GB PC28500/1066Mhz Reaper or OCZ 2x2GB PC26400/800Mhz Reap

    Yay.. thx yuu for the info about the dram and mch volt..
    I go to m.i.t bios settings, load optimized default then reboot
    Back to m.i.t and change the settings as below where i put mch core to = 1.200v and DRAM voltage to = 2.00v, the timings and advance timing for the RAM is auto but the value is the same as what i want them to be which is 5-5-5-15 and the advance timings as well to 4-4-12-68-4-2, after i reboot.. i didn't get the red warning message

    This is my bios settings and screenie of cpuz,tuner,spd,memset.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 9X
    Fine CPU Clock Ratio.....................:.+0.0
    CPU Frequency ...........................: 3.00Ghz (333x9)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disable]
    CPU Host Frequency (Mhz) ............: 333 Mhz
    PCI Express Frequency (Mhz) .........: Auto

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800 mv
    PCI Express Clock Drive.................: 900 mv
    CPU Clock Skew (ps)....................: 0 ps
    MCH Clock Skew (ps)...................: 0 ps


    DRAM Performance Control
    Performance Enhance...................: [Turbo]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: Auto
    Memory Frequency (Mhz) ..............: 1066 1066
    DRAM Timing Selectable ................: [Auto]

    Standard Timing Control
    CAS Latency Time........................5 Auto
    tRCD .........................................5 Auto
    tRP'...........................................5 Auto
    tRAS..........................................15 Auto

    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go

    Advanced Timing Control
    tRRD...........................................4 Auto
    tWTR..........................................4 Auto
    tWR............................................12 Auto
    tRFC...........................................68 Auto
    tRTP...........................................4 Auto
    Command Rate (CMD) ....................:2 Auto

    Driving Strength Profiles
    Driving Strength ............................1066 Auto

    Channel A
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control

    CPU
    CPU Vcore….……….........................:1.225v

    CPU Termination…..... 1.200V*.......: 1.2v(auto)

    CPU PLL…………………....1.500V*.......: 1.5v(auto)

    CPU Referen.…………....0.755V*.......: 0.760v (Auto)

    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above)

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.200v
    MCH Reference….…….0.760V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.500V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.0 v
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enable]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enable]
    Virtualization Technology................: [Enable] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enable] *Note* Must be enabled to flash from USB


    Gigabyte GA-EP45-DS3 Rev A2 Bios:F10d
    Intel Core 2 Duo E8400 @ 3.00 Ghz
    CPU cooler: Xigmatek S1283 Dark Knight
    Current OS: Windows 7 Nvidia Edition 32 bit
    RAM: 2x2GB G.Skill F2-8500CL5D-4GBPK (2x2GB) DDR2
    Graphic card: Asus NVIDIA GeForce EN 9800 GTX+, 512M DDR3 Dark Knight Version
    PSU: SilverStone Strider 600W PSU
    MainHD: 2X Samsung 500 GB NTFS HardDisk
    ExternalHD: 2TB Samsung Story NTFSHD (Main movie storage, always connected)
    : 1TB Seagate Desktop NTFSHD (Secondary movie storage, always connected)
    : 1 TB Lacie NTFS HD (only connected when needed)
    Altec Lancing 5.1 Speakers
    Logitech Wave Keyboard
    Razer Lachesis Mouse
    PC Case: Antec 300
    Fan: 2 Coolermaster Fan for intake at the front, 1 exhaust on top and back

  9. #49
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: GA Ep45-DS3 and OCZ 2x2GB PC28500/1066Mhz Reaper or OCZ 2x2GB PC26400/800Mhz Reap

    yuu is correct, loading Optimized Bios Defaults must be loaded before you initially start to make any bios changes.
    The following settings must NOT be changed manually unless you know exactly what these settings do.

    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................:
    PCI Express Clock Drive.................:
    CPU Clock Skew (ps)....................:
    MCH Clock Skew (ps)...................:

    After you've loaded optimized settings, save the settings and exit.
    Re-enter the bios and make any necessary changes, then save settings and exit.
    You might need to perform these steps with only one memory module installed.
    After you have made the required bios changes, add the second memory module.

    Good luck.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  10. #50
    Join Date
    May 2010
    Location
    -
    Posts
    110

    Default Re: GA Ep45-DS3 and OCZ 2x2GB PC28500/1066Mhz Reaper or OCZ 2x2GB PC26400/800Mhz Reap

    Good, now you'll see that when you add +0.02V in small stepps to Dram. at some point it will give the red message, then you add +0.02 to MCH Core, the 0.7-0.8V difference is not exact science. You can try lower MCh Core in small steps -0.02 V now, and at some point it will show the msg. that's it, you go one step back +0.02. This is something i remember having experienced with my board.
    Last edited by yuu; 06-12-2010 at 05:47 PM.

Page 5 of 6 FirstFirst ... 3456 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •