Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: Unstable q9550 and EP45 Ds3R




  1. #21
    Join Date
    May 2009
    Posts
    24

    Default Re: Unstable q9550 and EP45 Ds3R

    Alright lets try again

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 8.5
    Fine CPU Clock Ratio.....................:.5
    CPU Frequency ...........................: 3.4Ghz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: Disabled
    CPU Host Frequency (Mhz) ............: 333 Mhz
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 900
    PCI Express Clock Drive.................: 800
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................: 0


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    (G)MCH Frequency Latch...............: Auto
    System Memory Multiplier ..............: Auto
    Memory Frequency (Mhz) ..............: 800 : 800
    DRAM Timing Selectable ................: Auto

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................18

    Advanced Timing Control
    tRRD...........................................Aut o
    tWTR..........................................Auto
    tWR............................................Aut o
    tRFC...........................................Aut o
    tRTP...........................................Aut o
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................800

    Channel A
    Static tRead Value.........................:8
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:8
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Auto
    CPU
    CPU Vcore….………........: Auto
    CPU Termination…............:1.24
    CPU PLL…………………..........:Auto
    CPU Referen.…………..........:Auto
    MCH/ICH
    MCH Core…………….............:1.24
    MCH Reference….……............; Auto
    MCH/DRAM Ref.….................: Auto
    ICH I/O……………….................: Auto


    DRAM
    DRAM Voltage ……....2.200V............:
    DRAM Termination .…0.900V............: AUTO
    Channel A Reference 0.900V............: AUTO
    Channel B Reference 0.900V............: AUTO

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
    My Rig
    Q9550 @ 3.4ghz 8.5 x 10
    EP45-DS3R bios f11e
    8GB Kingston KHX8500D2K2/4G
    ATI Radeon 4850 512mb
    RAID 0 - 2x RaptorX 150
    CoolerMaster HX2 CPU cooler
    Thermaltake 750watt PS
    Windows 7 Enterprise

  2. #22
    Join Date
    May 2009
    Posts
    24

    Default Re: Unstable q9550 and EP45 Ds3R

    I have updated these

    Advanced Timing Control
    tRRD...........................................Aut o 3
    tWTR..........................................Auto 3
    tWR............................................Aut o 6
    tRFC...........................................Aut o 64
    tRTP...........................................Aut o 3
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................1066

    Channel A
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    My Rig
    Q9550 @ 3.4ghz 8.5 x 10
    EP45-DS3R bios f11e
    8GB Kingston KHX8500D2K2/4G
    ATI Radeon 4850 512mb
    RAID 0 - 2x RaptorX 150
    CoolerMaster HX2 CPU cooler
    Thermaltake 750watt PS
    Windows 7 Enterprise

  3. #23
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Unstable q9550 and EP45 Ds3R

    Thanks, see note at CPU freq

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 8.5
    Fine CPU Clock Ratio.....................:.5
    CPU Frequency ...........................: 2.8Ghz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: Disabled
    CPU Host Frequency (Mhz) ............: 333 Mhz
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 900
    PCI Express Clock Drive.................: 800
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................: 0


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    (G)MCH Frequency Latch...............: Auto
    System Memory Multiplier ..............: 2.40B
    Memory Frequency (Mhz) ..............: 800 : 800
    DRAM Timing Selectable ................: Manual

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................18

    Set all below to highest values, then later lower one by one testing as you go

    Advanced Timing Control
    tRRD...........................................3-5
    tWTR..........................................3-8
    tWR........................................... 4-10
    tRFC...........................................58-74
    tRTP...........................................3-5
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................800/1066 (test both, not sure which would be best at 800Mhz exactly)

    Channel A
    Static tRead Value.........................:8-9 use 9 for now
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:8-9 use 9 for now
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Auto
    CPU
    CPU Vcore….………........: Auto
    CPU Termination…............:1.24
    CPU PLL…………………..........:Auto
    CPU Referen.…………..........:Auto

    MCH/ICH
    MCH Core…………….............:1.24-1.28
    MCH Reference….……............; Auto << You may need to adjust this, see my signature for how this is done. You might need to use .68-.74 or .78-.84, do read the MCH GTL link in my signature otherwise you wont set this properly.
    MCH/DRAM Ref.….................: Auto
    ICH I/O……………….................: Auto


    DRAM
    DRAM Voltage ……....2.200V............: 2.2-2.3
    DRAM Termination .…0.900V............: AUTO
    Channel A Reference 0.900V............: AUTO
    Channel B Reference 0.900V............: AUTO

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
    Last edited by Lsdmeasap; 06-21-2010 at 03:26 PM.

  4. #24
    Join Date
    May 2009
    Posts
    24

    Default Re: Unstable q9550 and EP45 Ds3R

    That was an accident, I left it from the previous template.
    My Rig
    Q9550 @ 3.4ghz 8.5 x 10
    EP45-DS3R bios f11e
    8GB Kingston KHX8500D2K2/4G
    ATI Radeon 4850 512mb
    RAID 0 - 2x RaptorX 150
    CoolerMaster HX2 CPU cooler
    Thermaltake 750watt PS
    Windows 7 Enterprise

  5. #25
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Unstable q9550 and EP45 Ds3R

    OK, so you are using 8.5 x 333 then correct? If so I will edit as soon as you let me know

  6. #26
    Join Date
    May 2009
    Posts
    24

    Default Re: Unstable q9550 and EP45 Ds3R

    yes thats correct 8.5 x 333
    My Rig
    Q9550 @ 3.4ghz 8.5 x 10
    EP45-DS3R bios f11e
    8GB Kingston KHX8500D2K2/4G
    ATI Radeon 4850 512mb
    RAID 0 - 2x RaptorX 150
    CoolerMaster HX2 CPU cooler
    Thermaltake 750watt PS
    Windows 7 Enterprise

  7. #27
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •