Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 5 of 5 FirstFirst ... 345
Results 41 to 47 of 47

Thread: Help me overclock my E7200--> All info included in OP




  1. #41
    Join Date
    Jun 2010
    Location
    In the Mountains
    Posts
    25

    Default Re: Help me overclock my E7200--> All info included in OP

    It went smoothly because of your excellent guide. :)

    The settings below are what you advised. However, on some of them you dont have exact values, like the Advanced Timing Control. Instead of me "picking" out of your options which to input, could you give me which setting "you" would input if you were the one doing it ? It makes me feel more comfortable following your exact settings instead of me deciding from your options.

    Right now I have Optimized Defaults set. And the only other BIOS options I have changed, is the boot order and I set the PCI E to 100.

    PHP Code:
    CPU Host Clock Control --------------- : [Enabled]
    CPU Multiplier ------------------------: 9.0
    CPU Host Frequency 
    (Mhz) --------------: [266]  << Set 401
    PCI Express Frequency 
    (Mhz) ---------- : [100
    C.I.A.2 ------------------------------ : [Disabled


    CPU Clock Drive ---------------------- : 700mv   << Will be different once you load optimized
    PCI Express Clock Drive 
    -------------- : 700mv  << Will be different once you load optimized
    CPU Clock Skew 
    (ps) ------------------ : 0ps
    MCH Clock Skew 
    (ps) ------------------ : 0ps

    DRAM Performance Control
    Performance Enhance 
    ------------------ : [Standard
    Extreme Memory Profile --- (X.M.P.) -- : [Disabled]
    (
    G)MCH Frequency Latch --------------- : [Auto]
    System Memory Multiplier ------------- : [3.00A] << Set 2.00D
    Memory Frequency 
    (Mhz) --------------- : [800
    DRAM Timing Selectable --------------- : [Manual

    Standard Timing Control
    CAS Latency Time 
    -------- ---------- : [5]
    tRCD -------------------- ---------- : [5]
    tRP --------------------- ---------- : [5]
    tRAS ------------------- 15 ---------- : [15]

    Advanced Timing Control
    tRRD 
    -------------------- ---------- : 3-4
    tWTR 
    -------------------- ---------- :3-6
    tWR 
    --------------------- ---------- : 4-6
    tRFC 
    ------------------- 52 ---------- : 52-62
    tRTP 
    -------------------- ---------- : 3-5
    Command Rate 
    (CMD) ------ ---------- : 2

    Driving Strength Profiles
    Driving Strength 
    ............................ 800 or 1066, try 1066 later but it may be best

    Channel A
    Static tRead Value --------------------- : 8-9
    tRD Phase0 Adjustment 
    ---------------- : [Auto
    tRD Phase1 Adjustment ---------------- : [Auto]
    tRD Phase2 Adjustment ---------------- : [Auto]
    tRD Phase3 Adjustment ---------------- : [Auto]
    Trd2rd(Different Rank) --------------- : [Auto]
    Twr2wr(Different Rank) --------------- : [Auto]
    Twr2rd(Different Rank) --------------- : [Auto]
    Trd2wr(Same/Diff Rank) --------------- : [Auto]
    Dimm1 Clock Skew Control ------------- : [Auto]  ps
    Dimm2 Clock Skew Control 
    ------------- : [Auto]  ps

    Channel B
    Static tRead Value ------------------- : 8-9
    tRD Phase0 Adjustment 
    ---------------- : [Auto]
    tRD Phase1 Adjustment ---------------- : [Auto]
    tRD Phase2 Adjustment ---------------- : [Auto]
    tRD Phase3 Adjustment ---------------- : [Auto]
    Trd2rd(Different Rank) --------------- : [Auto]
    Twr2wr(Different Rank) --------------- : [Auto]
    Twr2rd(Different Rank) --------------- : [Auto]
    Trd2wr(Same/Diff Rank) --------------- : [Auto]
    Dimm1 Clock Skew Control ------------- : [Auto]  ps
    Dimm2 Clock Skew Control 
    ------------- : [Auto]  ps


    Load
    -Line Calibration ---------------- : [Disabled]  << Enabled
    CPU Vcore 
    --------------- 1.1000  ---- : [1.10000]   << Set 1.225-1.35

    CPU Termination 
    --------- 1.200V* ---- : [1.200v]  << may need 1.225-1.3
    CPU PLL 
    ----------------- 1.500V* ---- : [1.500v] << 1.5 may be finebut you might need 1.55 or so

    CPU Reference 
    ----------- 0.755V* ---- : [Auto
    CPU Reference2 ---------- 0.800V* ---- : [Auto

    MCH/ICH
    MCH Core 
    ---------------- 1.100V ----- : [1.100]   << Set 1.2-1.24
    MCH Reference 
    ----------- 0.800V ----- : [Auto]
    MCH/DRAM Ref ------------ 0.900V  ---- : [Auto]
    ICH I/----------------- 1.500V ----- : [1.500]
    ICH Core ---------------- 1.100V ----- : [1.100

    DRAM
    DRAM Voltage 
    ------------ 1.800V ----- : [1.90]
    DRAM Termination -------- 0.900V ----- : [Auto]
    Channel A Reference ----- 0.900V ----- : [Auto]
    Channel B Reference ----- 0.900V ----- : [Auto]

    Advanced Settings
    Limit CPUID Max
    to 3 ---------------- : [Disabled]
    No-Execute Memory Protect ------------ : [Enabled]
    CPU Enhanced Halt (C1E) -------------- : [Disabled]
    C2/C2E State Support ----------------- : [Disabled]
    x C4/C4E State Support --------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ---------- : [Enabled]
    CPU EIST Function  ------------------- : [Disabled]
    Virtualization Technology ------------ : [Disabled

    Integrated Peripherals
    Legacy USB Storage Detect  
    ----------- : [Disabled

  2. #42
    Join Date
    Jun 2010
    Location
    In the Mountains
    Posts
    25

    Default Re: Help me overclock my E7200--> All info included in OP

    Did you mean to set the FSB to 401 in that template ?

  3. #43
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help me overclock my E7200--> All info included in OP

    Yes, use 399 or 401 FSB, so you are not right on the 400 NB Strap line.

    As for advanced timings, I can't give you a "For sure will work use this" setting, Well I could but it would be terrible for performance.

    Just start with the higher values I gave and slowly lower one at a time testing as you go

    The above settings are not optimized defaults, you know that right?

  4. #44
    Join Date
    Jun 2010
    Location
    In the Mountains
    Posts
    25

    Default Re: Help me overclock my E7200--> All info included in OP

    Will do. And yes, I do know they are not optimized defaults. :)

  5. #45
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help me overclock my E7200--> All info included in OP

    K, just checking, thanks.

    Have any luck or time to test yet?

  6. #46
    Join Date
    Jun 2010
    Location
    In the Mountains
    Posts
    25

    Default Re: Help me overclock my E7200--> All info included in OP

    I'm sorry for the "extremely" late response.

    But "life" got in the way of my testing so had to break a bit. But anyway, I did overclock, and the attached pic is what I have been running since my last post on here.
    I have ran all kind of tests, memtest , Prime and others. Hours and hours of gaming on end.

    Here is what I am running.


  7. #47
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help me overclock my E7200--> All info included in OP

    No worries, we all have real lives we have to attend to!

    Nice to see you got a stable overclock going! Post back anytime if you need more help with anything

Page 5 of 5 FirstFirst ... 345

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •