Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 13 of 16 FirstFirst ... 31112131415 ... LastLast
Results 121 to 130 of 151

Thread: Help Please For A Newbie Noobie :)




  1. #121
    micky22 is offline Junior Member
    Join Date
    Jun 2010
    Location
    N.E England
    Posts
    85

    Default Re: Help Please For A Newbie Noobie :)

    Ok lads this is were am at,



    As you can see ran linx for 3 hours (And i did use all available Memory but linx dosnt show that on screen for some reason ) with no errors and i ran memtest86 for 2 passes no errors (am going to run Memtest86 again today while at work)

    Temps are on the high side a little but apart from that am pretty happy :D

    What do you guys think?

    EDIT:
    These are the settings am using apart from the Voltages which I changed :) everything set as default. Also load line calibration i cant disable only option is standard, level 1 and 2.

    CPU Clock Ratio ................................ [21x]
    Intel(R) Turbo Boost Tech .................. [Enabled] disabled
    Uncore Frequency .......................... [Auto] (3200MHz)set this to 21x
    BCLK Frequency (MHz) .....................133 set to 160
    Performance Enhance ...................... [Standard]
    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................8
    tRCD .......................................8 {set according to ram}
    tRP .........................................8
    tRAS .......................................24
    Load Line Calibration ................. [disabled]
    CPU Vcore ...............................[Auto]set this to "normal" setting in voltage list
    QPI/VTT Voltage 1.150v ............[Auto] 1.35000 or close too as you can
    DRAM Voltage 1.500v ..............[Auto] 1.66v
    Last edited by micky22; 07-01-2010 at 03:16 PM.
    Mobo: Asus Crosshair V Formula-Z
    CPU: AMDFX 8350 Black
    CPU Cooler: Corsair H70
    Ram: Corsair CMX8GX3M2A1333c9 (Looking to upgrade)
    HDD: OCZ Solid 3 60Gb Plus WD 1tb
    GFX: GTS250 (Looking to upgrade in the near future)
    Power Supply: Corsair GS600
    Bios:1302

  2. #122
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help Please For A Newbie Noobie :)

    Wow, you need to use way more than 10MB to test with in LinX

    Use 4GB or so, or All

    I'd use Level 1 Load Line Calibration

  3. #123
    micky22 is offline Junior Member
    Join Date
    Jun 2010
    Location
    N.E England
    Posts
    85

    Default Re: Help Please For A Newbie Noobie :)

    Quote Originally Posted by Lsdmeasap View Post
    Wow, you need to use way more than 10MB to test with in LinX

    Use 4GB or so, or All

    I'd use Level 1 Load Line Calibration
    I did and dont no why it showing as that i used all avaiable which was over 4gb will run again today to make sure :)
    Mobo: Asus Crosshair V Formula-Z
    CPU: AMDFX 8350 Black
    CPU Cooler: Corsair H70
    Ram: Corsair CMX8GX3M2A1333c9 (Looking to upgrade)
    HDD: OCZ Solid 3 60Gb Plus WD 1tb
    GFX: GTS250 (Looking to upgrade in the near future)
    Power Supply: Corsair GS600
    Bios:1302

  4. #124
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help Please For A Newbie Noobie :)

    Na, I see problem size 1000 also, so that means you are only using 10MB for the test.

    I dunno though now that I look at the total time and the test time for each run looks longer than it would for 10MB, maybe it's just cause you set a time instead of a # of runs (not sure, never use timed test)?

  5. #125
    micky22 is offline Junior Member
    Join Date
    Jun 2010
    Location
    N.E England
    Posts
    85

    Default Re: Help Please For A Newbie Noobie :)

    ok just set away again m8 and this time iv made sure its set to over 4gb and i am running test 75 times so ill post back results when iv got in from work :D
    Mobo: Asus Crosshair V Formula-Z
    CPU: AMDFX 8350 Black
    CPU Cooler: Corsair H70
    Ram: Corsair CMX8GX3M2A1333c9 (Looking to upgrade)
    HDD: OCZ Solid 3 60Gb Plus WD 1tb
    GFX: GTS250 (Looking to upgrade in the near future)
    Power Supply: Corsair GS600
    Bios:1302

  6. #126
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  7. #127
    micky22 is offline Junior Member
    Join Date
    Jun 2010
    Location
    N.E England
    Posts
    85

    Default Re: Help Please For A Newbie Noobie :)

    what would u recommend for both linx and memtest then m8?
    Mobo: Asus Crosshair V Formula-Z
    CPU: AMDFX 8350 Black
    CPU Cooler: Corsair H70
    Ram: Corsair CMX8GX3M2A1333c9 (Looking to upgrade)
    HDD: OCZ Solid 3 60Gb Plus WD 1tb
    GFX: GTS250 (Looking to upgrade in the near future)
    Power Supply: Corsair GS600
    Bios:1302

  8. #128
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help Please For A Newbie Noobie :)

    I run memtest86+ for however long spare time I have, normally while I sleep. Then I run 6 instances of HCI memtest in windows, using 680-700MB in each one until they reach 1000%, then I run 20 runs of LinX at Max memory.

    Then I am satisfied :)

  9. #129
    micky22 is offline Junior Member
    Join Date
    Jun 2010
    Location
    N.E England
    Posts
    85

    Default Re: Help Please For A Newbie Noobie :)

    ok thanks :)

    One thing i can never get Linx to use all my memory it will only ever run with 4gb :) but i will give that a blast and see how i get on thanks again ;)
    Mobo: Asus Crosshair V Formula-Z
    CPU: AMDFX 8350 Black
    CPU Cooler: Corsair H70
    Ram: Corsair CMX8GX3M2A1333c9 (Looking to upgrade)
    HDD: OCZ Solid 3 60Gb Plus WD 1tb
    GFX: GTS250 (Looking to upgrade in the near future)
    Power Supply: Corsair GS600
    Bios:1302

  10. #130
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help Please For A Newbie Noobie :)

    Ya we all have our own methods for testing, you can create your own as well! Everyone is different.

    What do you mean it wont use all, just click all button and it will use all available memory. Of course ya it wont be able to use 6GB because your OS is using 1.5-2Gb usually.

Page 13 of 16 FirstFirst ... 31112131415 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •