Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 28 of 28

Thread: New System setup Assistance Please.




  1. #21
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    82

    Default Re: New System setup Assistance Please.

    Ok so far so good. Small steps have been taken. Here are the bios tweaks. " Just upped the speed. The temps under load where 80-81 Degrees. Is that ok? Room temp is about 21degrees. Changed a few things in Bios Temps down to 75c

    PU Clock Ratio ........................21
    CPU Freqency ...........................3.74Ghz (170x21)
    Advanced CPU Core Features .............
    QPI Clock Ratio ........................36
    QPI Link Speed .........................6.12ghz
    Uncore Clock Ratio .....................21
    Uncore Frequency .......................3360Mhz

    >>>>> Standard Clock Control <<<<<<
    Base Clock (BCLK) Control ..............Disabled
    BCLK Frequency (Mhz) ...................170
    Extreme Memory Profile (X.M.P) .........Disabled
    System Memory Multiplier (SPD) .....10
    Memory Frequency (Mhz) .................1066 1700
    PCI Express Frequency (Mhz) ............100

    >>>>> Advanced Clock Control <<<<<<
    CPU Clock Drive ........................800mV
    PCI Express Clock Drive ................900mV
    CPU Clock Skew .........................0ps
    IOH Clock Skew .........................0ps


    Intel Turbo Boost.......................Enabled
    CPU Cores ..............................All
    CPU Multi- Threadin ....................Enabled
    CPU Enhanced Halt (C1E) ................Disabled
    C3/C6/C7 State Support .................Disabled
    CPU Thermal monitor ....................Enabled
    CPU EIST Function ......................Enabled
    Bi-Directional PROCHOT .................Enabled


    Extreme Memory Profile (X.M.P)..........Disabled
    System Memory multiplier ...............10
    Memory Frequency (Mhz) .................1066 1700
    Performance Enhance ....................Standard
    DRAM Timing Selectable .................Expert
    Profile DDR Voltage ....................1.5v
    Profile QPI Voltage ....................1.2v
    Channel Interleaving ...................Auto
    Rank Interleaving ......................Auto


    >>>>> Channel A Standard Timing Control <<<<<
    CAS Latency Time .......................8
    tRCD ...................................8
    tRP ....................................8
    tRAS ...................................24
    >>>>> Channel A Advanced Timing Control <<<<
    tRC ....................................Auto
    tRRD ...................................Auto
    tWTR ...................................Auto
    tWR ....................................Auto
    tWTP ...................................Auto
    tWL ....................................Auto
    tRFC ...................................Auto
    tRTP ...................................Auto
    tFAW ...................................Auto
    Command Rate (CMD)......................1
    >>>>> Channel A Misc Timing Control <<<<<
    B2B CAS Delay...........................Auto
    Round Trip Latency......................Auto

    >>>>> Channel Reads Folloed by Reads<<<<<
    Different DIMMs........................Auto
    Different Ranks .......................Auto
    On the Same Ranks......................Auto

    >>>>> Channel A Writes Followed By Writes <<<<<
    Different DIMMs........................Auto
    Different Ranks .......................Auto
    On the Same Ranks......................Auto

    >>>>> CPU <<<<<<
    Load line Calibration .................Standard
    CPU Vcore ... 1.22500v...............Auto 1.28v lower this and stable. Temps dropped to 75c on load
    Dynamic vcore ... +0.00000V......Auto
    QPI/VTT Voltage ... 1.150v.........1.35v upped this!
    CPU PLL ... 1.800v.................Auto

    >>>>> MCH/ICH <<<<<<
    PCIE ... 1.500v.................Auto
    QPI PLL ... 1.100v.................Auto
    IOH Core ... 1.100v.................Auto
    ICH I/O ... 1.500v.................Auto
    ICH Core ... 1.100v.................Auto

    >>>>> DRAM <<<<<
    DRAM Voltage ...1.500v.................1.66v
    DRAM Termination ... .0750v.........Auto
    CH-A Data Vref. ... .0750v.........Auto
    CH-B Data Vref. ... .0750v.........Auto
    Last edited by Lighty; 06-27-2010 at 05:53 PM.
    CPU: i7-930 @ 4ghz V 1.248 QPI/VTT v1.35
    PSU: Corsair AX850 Professional Gold Series
    Cooler: Noctua NH-U12P-SE2 Max Temp 78c
    MB: GA-X58A-UD5 Bios FD
    RAM: kingston Hyper-x 2000mhz 7-7-7-24 v1.66
    OCZ Vertex 2 60GB

  2. #22
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: New System setup Assistance Please.

    Sounds like you might need a better CPU cooler, what program under load is 75-80?

    If it is prime95 then you need a better cooler if you want to go any higher really. Of course we never push our systems like these apps do so your temps may never reach that expect during testing, but that is pretty warm if it is prime you are using, it would mean LinX or Intel Burn Test temps would be 90+

  3. #23
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: New System setup Assistance Please.

    keep qpi/vtt@ 1.35 and lower cpu voltage to 1.20000v and see if its stable
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  4. #24
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: New System setup Assistance Please.

    Also forgot to mention, check to be sure PLL in Auto is not being set above 1.8. You may even be able to lower this to 1.5-1.7 and still be stable, yes less than stock may be stable :)

  5. #25
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    82

    Default Re: New System setup Assistance Please.

    Yea I will keep testing with Easy tune for stable lower voltages. ALso will tinker with the ram see if I can get tighter timings like 7. 1.25v and stable going down, temps are at 70 now under load with Prime.
    CPU: i7-930 @ 4ghz V 1.248 QPI/VTT v1.35
    PSU: Corsair AX850 Professional Gold Series
    Cooler: Noctua NH-U12P-SE2 Max Temp 78c
    MB: GA-X58A-UD5 Bios FD
    RAM: kingston Hyper-x 2000mhz 7-7-7-24 v1.66
    OCZ Vertex 2 60GB

  6. #26
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: New System setup Assistance Please.

    i dont think you will achieve cas 7 timings,not without a huge bump in qpi/vtt voltage,those timings are good you wont see any difference from cas8 to cas7 and the extra voltage wont be worth it,its up to you though,personally i would aim for lower cpu voltage
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  7. #27
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    82

    Default Re: New System setup Assistance Please.

    ok I set CPU PLL to 1.8 easy tune says it's at 1.8v.

    The vCORE is 1.21875 (Power On) Stock in bios. Is stable at 1.22500v so I'm happy with that, it has brought the temps down to 68c

    Vcore at 1.200v blue screened on Prime95

    Also my Batch number for the i7-930 is 3939c166
    CPU: i7-930 @ 4ghz V 1.248 QPI/VTT v1.35
    PSU: Corsair AX850 Professional Gold Series
    Cooler: Noctua NH-U12P-SE2 Max Temp 78c
    MB: GA-X58A-UD5 Bios FD
    RAM: kingston Hyper-x 2000mhz 7-7-7-24 v1.66
    OCZ Vertex 2 60GB

  8. #28
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: New System setup Assistance Please.

    yes those volts are good and so are the temps
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •