Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: x58-UD3r Dead?




  1. #11
    Join Date
    Jun 2010
    Location
    England
    Posts
    13

    Default Re: x58-UD3r Dead?

    I've made interesting progress. I've changed voltages and BCLK and few other things. I can now get to 3.8GHZ and boot to Windows.

    However, I've left RAM on auto. The timings and thus a bit weird according to CPU-Z. I shall attempt to change some settings and see if it's memory related. I may have to run memtest I suppose.

  2. #12
    Join Date
    Jun 2010
    Location
    England
    Posts
    13

    Default Re: x58-UD3r Dead?

    Okay, played with memory settings in BIOS and totaly crashed and would not post at all. Seems to be isolated to memory settings for the divider maybe.

    Advanced CPU Features:
    CPU Clock Ratio ................................ [19x]
    Intel(R) Turbo Boost Tech .................. [Disabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Disabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Disabled]
    Bi-Directional PROCHOT ..................... [Disabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. [Auto]
    Uncore Frequency .......................... [Auto]
    Isonchronous Frequency ..................[Disabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [200]
    BCLK Frequency (MHz) .....................
    PCI Express Frequency (MHz) ........... [auto]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    System Memory Multiplier (SPD) ........ [AUTO]
    DRAM Timing Selectable (SPD) .......... [Quick]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................9
    tRCD .......................................9
    tRP .........................................9
    tRAS .......................................10

    Below values may be left in Auto if you like, generally this is fine. For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread

    ##Channel A Advanced Timing Control##
    tRC ........................................ (Should be = tRAS + tRP or above for stability)
    tRRD .......................................
    tWTR ...................................... (Must be Write to Read Delay/Same Rank - (tWL + 4)
    tWR ........................................
    tWTP ....................................... (tWTP Must = tWR + tWL + 4)
    tWL ........................................ (tWL Must be CAS Latency -1)
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................

    B2B CAS Delay ..........................


    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [standard]
    CPU Vcore ...............................1.318
    QPI/VTT Voltage 1.150v ............[Auto]
    CPU PLL 1.800v .......................[Auto]

    MCH/ICH
    PCIE 1.500v ...........................[Auto]
    QPI PLL 1.100v .......................[Auto]
    IOH Core 1.100v .....................[Auto]
    ICH I/O 1.500v .......................[Auto]
    ICH Core 1.1v ........................[Auto]

    DRAM
    DRAM Voltage 1.500v ..............[1.660]
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]



    ...

    Okay those abouve settings pretty much boot my system up fine. But am not saying they are prime95 stable, but at least get into Windows.

    I did have QPI/VTT on 1.335, but I got bsod on Windows startup 000124, so I set it to auto just for now.

    However, once I do the below I can't even post:
    Uncore: x12
    Qpi clock x36
    SPD x6

    Those settings allow my bios to be underclocked, but in auto mode it's 1600 and can start windows.

  3. #13
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: x58-UD3r Dead?

    CAS Latency Time ......................9
    tRCD .......................................9
    tRP .........................................9
    tRAS .......................................10
    ^^tras timings look too tight,maybe 24 or 26?,whats your ram rated at and speed 1600mhz? if so set it to that,124 error is too much or not enough qpi/vtt voltage,101 is too much or not enough cpu voltage......you might have better luck with a 21x cpu multi and a 180bclk???? i know my cpu doesnt run well with a 19x multi,also try with an even multi like 20x 190bclk as some cpu's like odd or even multipliers.

    21x cpu multi and a 180bclk try that first and ram timings of 9-9-9-24 @1600mhz,set qpi/vtt to 1.35v to start with,cpu voltage on normal voltage setting if no luck set to 1.25v
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: x58-UD3r Dead?

    Any luck yet?

    Glad to see you board is not dead!!

    If you need further help please post your new full settings you are now using, and tell us the issue

  5. #15
    Join Date
    Jun 2010
    Location
    England
    Posts
    13

    Default Re: x58-UD3r Dead?

    I've tried RAM modules one at a time and just the two instead of the three. Everytime I change memory divider setting in the BIOS the computer will not post.

    Standard settings of QPI x36, with Uncore X2 and SPD 6. I've tried manual timings of 9-9-9-24 or auto. I can change memory timings fine, but then I change the divider settings later and PC never posts. I've used exactly same settings in which I've had windows loaded and been somewhat fine.

    I've changed my settings few times, but they are the standard settings.

    Pretty much the same settings as everyone else uses, and tried settings that I was overclock with in the thread I made in the Overclocking forum.

    There isn't a option in the power settings or other part of the BIOS that can effect this?

  6. #16
    Join Date
    Jun 2010
    Location
    England
    Posts
    13

    Default Re: x58-UD3r Dead?

    Update.

    I've had teh CMOS battery out for over 30 mins and problem appears to be sorted. I will see how it goes over coming days.

    My computer no longer switched itself off after changing certain settings in the bios after saving. Now it just exits bios when I save and starts computer normally.

    What could of caused this problem?

  7. #17
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: x58-UD3r Dead?

    usually a bad oc setting that causes cmos corruption/boot loops,it usually wipes it when you clear cmos thats what its there for,like i said 30mins or overnight if one minute doesnt clear it
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  8. #18
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •