Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 33

Thread: Gigabyte EX-58 UD3R (rev. 1.6) random reboot without bsod




  1. #1
    Join Date
    Jun 2010
    Location
    Hungary
    Posts
    14

    Post Gigabyte EX-58 UD3R (rev. 1.6) random reboot without bsod



    I tried lof of settings from this forum, but no success. My computer random reboot without bsod. First shutdown and reboot, but always randomly. I updated the latest bios (FI) firmware and I want to use the optimized defaults but it's no good.
    Please help me with a good bios setting.

    This is my config:
    Gigabyte Ex58-Ud3R
    I7-920 D0 stepping
    OCZ Platinum DDD3 1600mhz 3x2GB 7-7-7/24
    ( The gigabyte optimum(auto) is 1066 mhz, and i tried it 1600 mhz but it failed in everest test.)
    Gainward Geforce GTX260 896MB Golden sample
    Nexus 600 W PSU

    Thanks!
    Last edited by RaptorMAN; 06-25-2010 at 05:55 PM.

  2. #2
    Join Date
    Jun 2010
    Location
    Hungary
    Posts
    14

    Default Re: Gigabyte EX-58 UD3R (rev. 1.6) random reboot without bsod

    Here is my latest, 10 hours testing, modified bios settings:
    (The [x] are modified.)

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]

    Uncore & QPI Features:
    QPI Clock Ratio..............................[x36]
    QPI Link Speed .............................. 4.8GHz
    Uncore Clock Ratio...........................[Auto]
    Uncore Frequency .......................... (3200MHz)
    Isonchronous Frequency ..................[Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Disabled]
    BCLK Frequency (MHz) .....................133
    PCI Express Frequency (MHz) ........... [Auto]
    C.I.A.2 [Disabled]
    Advanced Clock Control:
    <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:Street w:st="on"><st1:address w:st="on">CPU Clock Drive</st1:address></st1:Street> ..............................[800mV]
    <st1:Street w:st="on"><st1:address w:st="on">PCI Express Clock Drive</st1:address></st1:Street> ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [Auto]
    Memory Frequency........................1066
    DRAM Timing Selectable (SPD) .......... [Expert]

    Profile DDR Voltage......................1.5V
    Profile QPI Voltage......................1.15V

    Channel A + B + C
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ....................7
    tRCD .......................................7
    tRP .........................................7
    tRAS .......................................[24]
    Command Rate(CMD)...........................1

    ##Channel A Advanced Timing Control##
    tRC ........................................[35]
    tRRD .......................................4 Auto
    tWTR ......................................[4]
    tWR ........................................8 Auto
    tWTP .......................................[18]
    tWL ........................................[6]
    tRFC .......................................[86]
    tRTP .......................................4 Auto
    tFAW ......................................16 Auto
    Command Rate (CMD) ................1

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................(51) Auto
    B2B CAS Delay ..........................- Auto

    Advanced Voltage Control:
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ...............................1.25000V Auto
    QPI/VTT Voltage 1.150v ............[1.275]
    CPU PLL 1.800v .......................1.800V Auto

    MCH/ICH
    PCIE 1.500v ...........................1.500V Auto
    QPI PLL 1.100v .......................1.100V Auto
    IOH Core 1.100v .....................1.100V Auto
    ICH I/O 1.500v .......................1.500V Auto
    ICH Core 1.1v ........................1.100V Auto

    DRAM
    DRAM Voltage 1.500v ..............[1.64]
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    Ch-C Data VRef. 0.750v [AUTO]…<o:p></o:p>
    Last edited by RaptorMAN; 06-25-2010 at 05:57 PM.

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte EX-58 UD3R (rev. 1.6) random reboot without bsod

    So are you stable now or do you need more advice on settings?

    I can give you full settings if you want that should work for 1600Mhz once you tweak them a little bit

  4. #4
    Join Date
    Jun 2010
    Location
    Hungary
    Posts
    14

    Default Re: Gigabyte EX-58 UD3R (rev. 1.6) random reboot without bsod

    I'm testing this config now, but yeah please give me a 1600mhz working fee.

    What's your opinion about Nexus 600W PSU with GIGABYTE mainboard?
    Good or not? Or maybe change it a GIGABYTE PSU?

    Thanks for all!

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte EX-58 UD3R (rev. 1.6) random reboot without bsod

    Not sure about that PSU, haven't seen many people use or mention that brand of PSU so that might not be a good thing.

    PSU is the most important part of your system, so don't go cheap or small

    Try these for 1600Mhz

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled] << Disable if you want CPU to run at full speed always
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled] << Disable if you want CPU to run at full speed always
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]

    Uncore & QPI Features:
    QPI Clock Ratio..............................[x36] << X36 or x44, at 133 Bclk both are fine to use
    QPI Link Speed .............................. 4.8GHz
    Uncore Clock Ratio...........................[Auto] << Set manually to x24-26
    Uncore Frequency ..........................
    Isonchronous Frequency ..................[Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Disabled]
    BCLK Frequency (MHz) .....................133
    PCI Express Frequency (MHz) ........... [Auto] << Set 100

    C.I.A.2 [Disabled]
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [Auto] << Set 12
    Memory Frequency........................1600
    DRAM Timing Selectable (SPD) .......... [Expert]


    Channel A + B + C
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ....................7
    tRCD .......................................7
    tRP .........................................7
    tRAS .......................................[24]
    Command Rate(CMD)...........................1

    ##Channel A Advanced Timing Control##
    tRC ........................................[35]
    tRRD .......................................4 Auto
    tWTR ......................................[4]
    tWR ........................................8 Auto
    tWTP .......................................[18]
    tWL ........................................[6]
    tRFC .......................................[86]
    tRTP .......................................4 Auto
    tFAW ......................................16 Auto
    Command Rate (CMD) ................1

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................(51) Auto
    B2B CAS Delay ..........................- Auto

    Advanced Voltage Control:
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ...............................1.25000V Auto
    QPI/VTT Voltage 1.150v ............[1.275] << 1.3-1.35, you might be ok with less but with tight timings you may need this or more, all up to your CPU. If you keep getting 0124 BSOD's then you need more.
    CPU PLL 1.800v .......................1.800V Auto

    MCH/ICH
    PCIE 1.500v ...........................1.500V Auto
    QPI PLL 1.100v .......................1.100V Auto or 1.2
    IOH Core 1.100v .....................1.100V or 1.14
    ICH I/O 1.500v .......................1.500V Auto
    ICH Core 1.1v ........................1.100V Auto

    DRAM
    DRAM Voltage 1.500v ..............[1.66]
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]

  6. #6
    Join Date
    Jun 2010
    Location
    Hungary
    Posts
    14

    Default Re: Gigabyte EX-58 UD3R (rev. 1.6) random reboot without bsod

    Thanks!

    I will try it!

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  8. #8
    Join Date
    Jun 2010
    Location
    Hungary
    Posts
    14

    Default Re: Gigabyte EX-58 UD3R (rev. 1.6) random reboot without bsod

    I tested your recommended settings, no problem, run fine, but the cpu temperature max 75C.

    But i have got a new reboot problem. When run the vista defrag, the computer reboot without bsod again. When I run again the defrag make reboot again after 10 minutes.
    So when run defrag, the machine kill himself...Your opinion, what's the problem?

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte EX-58 UD3R (rev. 1.6) random reboot without bsod

    What settings are you using now, please give exact full settings. Also post a screenshot of Easytune, advanced voltage tab 1

    Sounds like you need a better cooler too!

  10. #10
    Join Date
    Jun 2010
    Location
    Hungary
    Posts
    14

    Default Re: Gigabyte EX-58 UD3R (rev. 1.6) random reboot without bsod

    I don't use Easytune. I set your recommended settings now.
    This is that:

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]

    Uncore & QPI Features:
    QPI Clock Ratio..............................[x36]
    QPI Link Speed .............................. 4.8GHz
    Uncore Clock Ratio...........................[x25]
    Uncore Frequency ..........................
    Isonchronous Frequency ..................[Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Disabled]
    BCLK Frequency (MHz) .....................133
    PCI Express Frequency (MHz) ........... [Auto] << Set 100

    C.I.A.2 [Disabled]
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [12x]
    Memory Frequency........................1600
    DRAM Timing Selectable (SPD) .......... [Expert]


    Channel A + B + C
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ....................7
    tRCD .......................................7
    tRP .........................................7
    tRAS .......................................[24]
    Command Rate(CMD)...........................1

    ##Channel A Advanced Timing Control##
    tRC ........................................[35]
    tRRD .......................................4 Auto
    tWTR ......................................[4]
    tWR ........................................8 Auto
    tWTP .......................................[18]
    tWL ........................................[6]
    tRFC .......................................[86]
    tRTP .......................................4 Auto
    tFAW ......................................16 Auto
    Command Rate (CMD) ................1

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................(51) Auto
    B2B CAS Delay ..........................- Auto

    Advanced Voltage Control:
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ...............................1.25000V Auto
    QPI/VTT Voltage 1.150v ............[1.335]
    CPU PLL 1.800v .......................1.800V Auto

    MCH/ICH
    PCIE 1.500v ...........................1.500V Auto
    QPI PLL 1.100v .......................1.200V
    IOH Core 1.100v .....................1.140
    ICH I/O 1.500v .......................1.500V Auto
    ICH Core 1.1v ........................1.100V Auto

    DRAM
    DRAM Voltage 1.500v ..............[1.66]
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]

Page 1 of 4 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •