Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 32

Thread: p35-ds3r




  1. #1
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default p35-ds3r

    my friend told me last night that his system freeze without any reson even the system at idle or at stress doesn't matter
    , he has no overclock all settings at defualt what it could be ?,
    the system freeze suddenly with no reason (mouse and keyboard freeze) .
    can someone give me a tips how to test from the beganing (software burn ... memtest...etc).

    why the northbridge at 50 c is it overheating at idle but the cpu at idle at 37c????????????

    Kingston KTC1G-UDIMM
    intel e6750
    thermaltake tr2 rx 450pp
    gainward 8800gt
    hitachi 160gbyte
    gigabyte p35-ds3r latest bios (its not the problem because the problem happen after update bios)
    windows 7 7600 32bit without sp1
    Last edited by gasan; 07-14-2010 at 09:25 PM.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  3. #3
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default Re: p35-ds3r

    thanks for the replay i will try

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: p35-ds3r

    Let us know how that goes, is he setting the ram voltages himself or not?

    If not he needs to set them to spec for the memory, and raise NB voltage if this is 4GB

  5. #5
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default Re: p35-ds3r

    ok i did about 10 pass in memtest without any errors and today i got the computer stock (freeze)
    what should i do now

  6. #6
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default Re: p35-ds3r

    damn it happen to me sometime its not everytime i turn it on
    can some one tell me whyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy yyyyyyyyyyyyyyyyyyyyyy?
    i test my pc with 3dmark 2003 with highdetails for about 4 hours without break and the next day with occt full details without freeze !!!!!!!
    its so wired

  7. #7
    Join Date
    Oct 2008
    Posts
    9

    Default Re: p35-ds3r

    reset cmos to clear all bios settings.
    then boot at default bios settings.

  8. #8
    Join Date
    May 2010
    Location
    -
    Posts
    110

    Default Re: p35-ds3r

    The bios sometimes boots with Static tread of 1 less than it should if left on auto, just look the Memset or Everest:Chipset. Whereas the chipset is still cool it will boot and even be operational for a while, even pass 2 minutes stress testing, but eventually fail and reboot. I think all P31 P35 chipsets are infestated with that problem that is why I migrated to P45. It was working by manual settind of the Static Tread, but still 1 in 10 times it would loose capability to cold boot keeping the overclock. But you say that it freezes witch could also be MCH overheat or overvolt.

  9. #9
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default Re: p35-ds3r

    what is static read what should i do ????????????? do you now that problem , is that problem happen to all p35 ?????

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: p35-ds3r

    Static tRead Value is a setting in your BIOS, the BOLDED one below

    Performance Enhance = [Standard]

    CAS Latency Time________________
    Dram RAS# to CAS# Delay_________
    Dram RAS# Precharge Delay_______
    Precharge Delay (tRAS)__________

    ACT to ACT Delay (tRRD)_________
    Rank Write to READ Delay________
    Write to Precharge Delay_________
    Refresh to ACT Delay______________
    Read to Precharge Delay__________
    Static tRead Value_______________ <<< This One
    Static tRead Phase Adjust________ [Auto]

    Set to 6-7 for under 400 FSB

Page 1 of 4 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •