Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 10 FirstFirst 1234 ... LastLast
Results 11 to 20 of 96

Thread: Ud3p & e8400




  1. #11

    Default Re: Ud3p & E8400

    Here is another template in the works and running 12 hours with new ram now on prime 95 blend
    If it helps somebody so be it!
    If there is any changes or would be a failure I will adjust as required and so note.
    testing now with new ram Mushkins #996593 4gb(2x2gb)
    8000 Redline
    DDR2-1000's


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster .................:Auto
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio .....................:0.0
    CPU Frequency ............................:3.96GHz (440x9) 3960Ghz.

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: Enabled
    CPU Host Frequency (Mhz) .............:440Mhz
    PCI Express Frequency (Mhz) ..........:100
    C.I.A.2 ................................: Disabled

    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................:900
    CPU Clock Skew (ps)......................:0ps
    MCH Clock Skew (ps).....................:0ps

    DRAM Performance Control
    Performance Enhance....................: [Standard]
    Extreme Memory Profile (X.M.P.)........:[Disabled]
    (G)MCH Frequency Latch.................: [Auto]
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ................: 800 @ 880mhz 1:1
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time................5
    tRCD ..................................5
    tRP'................................... 5
    tRAS..................................12

    Advanced Timing Control
    tRRD........................................... auto
    tWTR...........................................aut o
    tWR............................................ auto
    tRFC........................................... auto
    tRTP........................................... auto
    Command Rate (CMD) ...................2T

    Driving Strength Profiles
    Driving Strength ............................ 1066

    Channel A
    Static tRead Value..........................: 9
    tRD Phase0 Adjustment...................: Auto
    tRD Phase1 Adjustment....................: Auto
    tRD Phase2 Adjustment ....................: Auto
    tRD Phase3 Adjustment.....................: Auto
    Trd2rd(Different Rank)......................: Auto
    Twr2wr(Different Rank).....................: Auto
    Twr2rd(Different Rank)......................: Auto
    Trd2wr(Same/Diff Rank).....................: Auto
    Dimm1 Clock Skew Control..................: Auto
    Dimm2 Clock Skew Control..................: Auto

    Channel B
    Static tRead Value..............................: 9
    tRD Phase0 Adjustment.......................: Auto
    tRD Phase1 Adjustment.......................: Auto
    tRD Phase2 Adjustment ......................: Auto
    tRD Phase3 Adjustment.......................: Auto
    Trd2rd(Different Rank)........................: Auto
    Twr2wr(Different Rank).......................: Auto
    Twr2rd(Different Rank)........................: Auto
    Trd2wr(Same/Diff Rank)......................: Auto
    Dimm1 Clock Skew Control....................: Auto
    Dimm2 Clock Skew Control....................: Auto

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    Load Line Calibration .................: Disabled
    CPU Vcore......................:1.25000V as set/seen in bios. then under test:HW Monitor shows 1.18v, cpuz 1.184
    CPU Termination…...............:1.220V
    CPU PLL..............................:1.500V
    CPU Reference.........0.760V*........:Auto v

    MCH/ICH
    MCH Core……………............................:1.280V
    MCH Reference….…….0.760V..............:Auto v
    MCH/DRAM Ref.…....0.900V................:Auto v
    ICH I/O……………….....1.500V.............:1.500V
    ICH Core…………......1.100V...............:1.200V

    DRAM
    DRAM Voltage ……....1.800V.............: 2.040V
    DRAM Termination .…0.900V............: 1.020v
    Channel A Reference 0.900V............: 1.020v
    Channel B Reference 0.900V............: 1.020v

    Advanced BIOS Features
    Limit CPUID Max. to 3 ........................: [Disabled]
    No-Execute Memory Protect ................: [Enabled]
    CPU Enhanced Halt (C1E) ....................: Enabled
    C2/C2E State Support .........................: [Disabled]
    x C4/C4E State Support .......................: [Disabled]
    CPU Thermal Monitor 2 (TM2) ..............: [Enabled]
    CPU EIST Function ..............................:[Disabled]
    Last edited by Tyreman; 08-15-2010 at 08:17 PM.
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  2. #12
    kick's Avatar
    kick is offline Senior Member
    Join Date
    Feb 2009
    Location
    Europe,the wild wild west.
    Posts
    1,223

    Default Re: Ud3p & e8400

    What memory bandwidth and latency are u getting tyre?
    Current Systems:

    Asrock p67 Extreme6.............. Gigabyte EP-45 UD3 ...................... Gigabyte 73 PVM S2
    Intel i5 2500k 4.8ghz................ Intel Q8400 3.8ghz......................... Intel D820 2.8ghz
    Zalman 10x cooler.................... Coolermaster V8............................ HP cooler
    8GB Gskill ripjaw ddr3.............. 4GB Gskill PI ddr2.......................... 4GB samsung ddr2
    60GB ssd/500GB HDD .............. WD 1TB hdd.................................... Seagate 160GB hdd
    GTX 460 1GB x2 SLI ................. Msi 9600GT 512MB(died) ........... Onboard gx
    Win7 64 ,750w psu(ocz)............ Win7 64 ,520w psu,seasonic...... Win XP pro ,400w psu

    HEC 6A34 case . ....................... Jeantec R2 case............................ Packard Bell case

    hoping to upgrade to http://www.thinkgeek.com/stuff/41/habicase.shtml
    http://www.flixya.com/video/140325/Animal-launching

  3. #13

    Default Re: Ud3p & e8400

    Haven't tested yet Kick still running prime blend but will test and post when done prime blend
    I will post my results
    Last edited by Tyreman; 08-06-2010 at 08:51 AM.
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  4. #14

    Default Re: Ud3p & e8400

    63.2 latency
    BUT I had to set ram 2 settings to 4-4 as noted in above template and now prime blend test again.
    Last edited by Tyreman; 08-06-2010 at 08:52 AM.
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  5. #15

    Default Re: Ud3p & e8400

    had to set ram timings back to the 5-5-5
    (4's no good here)
    Then Latency tested 3 times 64.9, 64.1, 64.0 were the results
    will retest again blend on prime 95 to be sure then as time permits work up the OC a bit more later
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  6. #16
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Ud3p & e8400

    Your memory timings are comfortably "loose" while you're increasing cpu and memory speeds.
    My Mushkin 996599 XP-1066 memory was stable up to 988MHz with 5-5-4-12 timings, where I used the 2.40B strap up to FSB = 458MHz and switched to the 2.00D strap when my FSB was higher than 470MHz. Using the B-strap in the lower/mid 400MHz range, tRD = 8 was stable and provided slightly better memory bandwidth and latency. Some setups have stability issues when using the B-strap in this range.
    MCH Core = 1.26 - 1.28 with my 2x2GB setup was stable, but 1.28 "felt" better.
    DRAM voltage = 2.02 worked all the way up to 1100MHz memory speeds.
    YMMV ;)
    Last edited by profJim; 08-09-2010 at 10:09 PM. Reason: grammer
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  7. #17

    Default Re: Ud3p & e8400

    updated template(above)again
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  8. #18
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Ud3p & e8400

    It's best if you post your newest bios settings in a new post, rather than editing a previous post. This will make it easier for us to follow and see exactly what was changed.

    You can post your bios template in a CODE window by selecting/highlighting the template and then click on the # icon.

    Here's an example of your post #11 bios template in a CODE window:
    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster .................:Auto
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio .....................:0.0
    CPU Frequency ............................:3.96GHz (440x9) 3.960Ghz.
    
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: Enabled
    CPU Host Frequency (Mhz) .............:440Mhz
    PCI Express Frequency (Mhz) ..........:100
    C.I.A.2 ................................: Disabled
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................:900
    CPU Clock Skew (ps)......................:0ps
    MCH Clock Skew (ps).....................:0ps
    
    DRAM Performance Control
    Performance Enhance....................: [Standard]
    Extreme Memory Profile (X.M.P.)........:[Disabled]
    (G)MCH Frequency Latch.................: [Auto]
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ................: 800 @ 870mhz 1:1
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time................5
    tRCD ..................................5
    tRP'................................... 5
    tRAS..................................12
    
    Advanced Timing Control
    tRRD........................................... auto
    tWTR...........................................aut o
    tWR............................................ auto
    tRFC........................................... auto
    tRTP........................................... auto
    Command Rate (CMD) ...................2T
    
    Driving Strength Profiles
    Driving Strength ............................ 1066
    
    Channel A
    Static tRead Value..........................: 9
    tRD Phase0 Adjustment...................: Auto
    tRD Phase1 Adjustment....................: Auto
    tRD Phase2 Adjustment ....................: Auto
    tRD Phase3 Adjustment.....................: Auto
    Trd2rd(Different Rank)......................: Auto
    Twr2wr(Different Rank).....................: Auto
    Twr2rd(Different Rank)......................: Auto
    Trd2wr(Same/Diff Rank).....................: Auto
    Dimm1 Clock Skew Control..................: Auto
    Dimm2 Clock Skew Control..................: Auto
    
    Channel B
    Static tRead Value..............................: 9
    tRD Phase0 Adjustment.......................: Auto
    tRD Phase1 Adjustment.......................: Auto
    tRD Phase2 Adjustment ......................: Auto
    tRD Phase3 Adjustment.......................: Auto
    Trd2rd(Different Rank)........................: Auto
    Twr2wr(Different Rank).......................: Auto
    Twr2rd(Different Rank)........................: Auto
    Trd2wr(Same/Diff Rank)......................: Auto
    Dimm1 Clock Skew Control....................: Auto
    Dimm2 Clock Skew Control....................: Auto
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    Load Line Calibration .................: Disabled
    CPU Vcore......................:1.25000V as set/seen in bios. then under test:HW Monitor shows 1.18v, cpuz 1.184
    CPU Termination…...............:1.220V
    CPU PLL..............................:1.500V
    CPU Reference.........0.760V*........:Auto v
    
    MCH/ICH
    MCH Core……………............................:1.260V
    MCH Reference….…….0.760V..............:Auto v
    MCH/DRAM Ref.…....0.900V................:Auto v
    ICH I/O……………….....1.500V.............:1.500V
    ICH Core…………......1.100V...............:1.200V
    
    DRAM
    DRAM Voltage ……....1.800V.............: 2.00V
    DRAM Termination .…0.900V............: 1.00v
    Channel A Reference 0.900V............: 1.00v
    Channel B Reference 0.900V............: 1.00v
    
    Advanced BIOS Features
    Limit CPUID Max. to 3 ........................: [Disabled]
    No-Execute Memory Protect ................: [Enabled]
    CPU Enhanced Halt (C1E) ....................: Enabled
    C2/C2E State Support .........................: [Disabled]
    x C4/C4E State Support .......................: [Disabled]
    CPU Thermal Monitor 2 (TM2) ..............: [Enabled]
    CPU EIST Function ..............................:[Disabled]
    ** edit ** Keep C1E and EIST DISABLED while testing your overclock settings. You can later enable one or both and re-test once you've reached your final overclock.
    Last edited by profJim; 08-09-2010 at 10:25 PM. Reason: additional info
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  9. #19
    Join Date
    Jun 2010
    Location
    USA
    Posts
    122

    Default Re: Ud3p & e8400

    What speed is your memory?

    Im running 450 FSB with a 2.4B strap. Memory @ 1080Mhz at 2.1v ( 2x2GB PC8500 ) with a tRead=5.

    More of my info is in my signature.

    If your temps are fine you can go higher.

    MCH = 1.26v ( Intels max rated volatge for the P45 chipset )

    Enable LLC, My E8400 E0 is at 4050Mhz @ 1.328v " LOAD " 1.35v bios

    I had was up to 4250Mhz with the 2.0D strap but I lost a bit of memory bandwidth. So I dropped back to 4050Mhz with the 2.4B strap.

    With the strap set at 2.0D running at 900Mhz instead of 1080Mhz. I was down in the 8GB/s range for both values.

    Just my 2cps.
    Last edited by Triton05; 08-11-2010 at 11:33 PM.
    ASUS P8P67 rev3.1 | i5 2500K @ 4.5Ghz | Vcore: 1.300
    MSI 460GTX Hawk Talon Attack (900/4000) | 23C Idle / 65C max load / +100mV
    Kingston HyperX | DDR3 1600Mhz | Corsair H60 | 36C Idle / 65C max load
    500GB Seagate Barracuda 7200rpm| OCZ 600watt SXS PSU
    LG E2050T LED monitor
    3DMark11 P4560


  10. #20
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Ud3p & e8400

    tRD 5? That's about 2-3 less than I have ever saw for this FSB/DDR, is that stable?

Page 2 of 10 FirstFirst 1234 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •