Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 8 of 10 FirstFirst ... 678910 LastLast
Results 71 to 80 of 96

Thread: Ud3p & e8400




  1. #71
    Join Date
    Jun 2010
    Location
    USA
    Posts
    122

    Default Re: Ud3p & e8400

    That looks really good! :)

    Im interested in your template. Mostly your memory timings..

    Any chance you can share ?

    MCH core
    Dram

    advanced mem timings
    ASUS P8P67 rev3.1 | i5 2500K @ 4.5Ghz | Vcore: 1.300
    MSI 460GTX Hawk Talon Attack (900/4000) | 23C Idle / 65C max load / +100mV
    Kingston HyperX | DDR3 1600Mhz | Corsair H60 | 36C Idle / 65C max load
    500GB Seagate Barracuda 7200rpm| OCZ 600watt SXS PSU
    LG E2050T LED monitor
    3DMark11 P4560


  2. #72

    Default Re: Ud3p & e8400

    Bios F-9 now is it better 'bout same maybe not sure
    I did test small fft and large on orthos 2 hours each first and did the special flop processor test on orthos in the drop down test only 'bout 25 minutes
    Then LinX test

    Then did orthos blend after LinX and it failed after 'bout 65 minutes
    Trying smaller MCH, northbridge now at 1.24

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster .........Auto
    CPU Clock Ratio .................9
    Fine CPU Clock Ratio ............0.0
    CPU Frequency ...................4.44(444x9)
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control............Enabled
    CPU Host Frequency (Mhz) .........444
    PCI Express Frequency (Mhz) ......100 Always 100
    C.I.A.2 ..........................Disabled
    Advanced Clock Control[Press Enter]
    CPU Clock Drive...................800
    PCI Express Clock Drive...........900
    CPU Clock Skew (ps)...............0ps
    MCH Clock Skew (ps)...............0ps
    DRAM Performance Control
    Performance Enhance................Standard
    Extreme Memory Profile (X.M.P.)....Disabled
    (G)MCH Frequency Latch.............400
    System Memory Multiplier ..........2.00D “D” straps 400fsb
    Memory Frequency (Mhz) ............800 @ 888mhz 1:1
    DRAM Timing Selectable ............Manual
    Standard Timing Control
    CAS Latency Time...................5
    tRCD ..............................5
    tRP'...............................5
    tRAS...............................12
    Advanced Timing Control
    tRRD...............................auto
    tWTR...............................auto
    tWR................................auto
    tRFC...............................auto
    tRTP...............................auto
    Command Rate (CMD) ................2T
    Driving Strength Profiles
    Driving Strength ...................1066
    Channel A
    Static tRead Value..................9
    tRD Phase0 Adjustment...............Auto
    tRD Phase1 Adjustment...............Auto
    tRD Phase2 Adjustment ..............Auto
    tRD Phase3 Adjustment...............Auto
    Trd2rd(Different Rank)..............Auto
    Twr2wr(Different Rank)..............Auto
    Twr2rd(Different Rank)..............Auto
    Trd2wr(Same/Diff Rank)..............Auto
    Dimm1 Clock Skew Control............Auto
    Dimm2 Clock Skew Control............Auto
    Channel B
    Static tRead Value.....................9
    tRD Phase0 Adjustment..................Auto
    tRD Phase1 Adjustment..................Auto
    tRD Phase2 Adjustment .................Auto
    tRD Phase3 Adjustment..................Auto
    Trd2rd(Different Rank).................Auto
    Twr2wr(Different Rank).................Auto
    Twr2rd(Different Rank).................Auto
    Trd2wr(Same/Diff Rank).................Auto
    Dimm1 Clock Skew Control...............Auto
    Dimm2 Clock Skew Control...............Auto
    Motherboard Voltage Control
    Voltage Type... Manual
    CPU
    Load Line..................Disabled
    CPU V core.................125625V
    CPU Termination…1.200V.....1.220V
    CPU PLL.........1.500V.....1.500V
    CPU Reference...0.760V.....Auto
    MCH/ICH
    MCH Core…………..1.100V........1.300V Northbridge
    MCH Reference….…….0.757V....Auto
    MCH/DRAM Ref.…....0.900V....1.04
    ICH I/O……………….....1.500V....1.500V
    ICH Core…………......1.100V....1.200V
    DRAM
    DRAM Voltage ……....1.800V...2.08V
    DRAM Termination .…0.900V...1.04
    Channel A Reference 0.900V..1.04
    Channel B Reference 0.900V..1.04
    Advanced BIOS Features
    Limit CPUID Max. to 3 .......Disabled
    No-Execute Memory Protect ...Enabled
    CPU Enhanced Halt (C1E) .....Enabled
    C2/C2E State Support ........Disabled
    x C4/C4E State Support ......Disabled
    CPU Thermal Monitor 2 (TM2) .Enabled
    CPU EIST Function ...........Enabled
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  3. #73
    Join Date
    Jun 2010
    Location
    USA
    Posts
    122

    Default Re: Ud3p & e8400

    Your CPU term is a bit close to your CPU core. Might want to dropt hat to 1.20v rather then 1.22v. Without LLC enabled, your vdroop is going to be a bit more then mine.

    In my bios with LLC enabled. I have my Vcore set to 1.348 but in windows under full load its only 1.328. So my cpu term of 1.30v is fine.

    You might be cutting "that" particular value a bit close.
    ASUS P8P67 rev3.1 | i5 2500K @ 4.5Ghz | Vcore: 1.300
    MSI 460GTX Hawk Talon Attack (900/4000) | 23C Idle / 65C max load / +100mV
    Kingston HyperX | DDR3 1600Mhz | Corsair H60 | 36C Idle / 65C max load
    500GB Seagate Barracuda 7200rpm| OCZ 600watt SXS PSU
    LG E2050T LED monitor
    3DMark11 P4560


  4. #74
    Join Date
    Jun 2010
    Location
    USA
    Posts
    122

    Default Re: Ud3p & e8400

    Now tighten up those memory timings! ;)

    Intel(R) LINPACK 64-bit data - LinX 0.6.4

    Current date/time: Mon Aug 30 18:28:34 2010

    CPU frequency: 4.050 GHz
    Number of CPUs: 2
    Number of threads: 2

    Parameters are set to:

    Number of tests : 1
    Number of equations to solve (problem size) : 18265
    Leading dimension of array : 18280
    Number of trials to run : 10
    Data alignment value (in Kbytes) : 4

    Maximum memory requested that can be used = 2671443296, at the size = 18265

    ============= Timing linear equation system solver =================

    Size LDA Align. Time(s) GFlops Residual Residual(norm)
    18265 18280 4 139.824 29.0575 2.790929e-010 2.966305e-002
    18265 18280 4 139.707 29.0818 2.790929e-010 2.966305e-002
    18265 18280 4 139.766 29.0694 2.790929e-010 2.966305e-002
    18265 18280 4 139.987 29.0236 2.790929e-010 2.966305e-002
    18265 18280 4 139.819 29.0584 2.790929e-010 2.966305e-002
    18265 18280 4 139.705 29.0821 2.790929e-010 2.966305e-002
    18265 18280 4 139.682 29.0870 2.790929e-010 2.966305e-002
    18265 18280 4 139.660 29.0917 2.790929e-010 2.966305e-002
    18265 18280 4 139.742 29.0745 2.790929e-010 2.966305e-002
    18265 18280 4 139.706 29.0819 2.790929e-010 2.966305e-002

    Performance Summary (GFlops)

    Size LDA Align. Average Maximal
    18265 18280 4 29.0708 29.0917

    End of tests
    ASUS P8P67 rev3.1 | i5 2500K @ 4.5Ghz | Vcore: 1.300
    MSI 460GTX Hawk Talon Attack (900/4000) | 23C Idle / 65C max load / +100mV
    Kingston HyperX | DDR3 1600Mhz | Corsair H60 | 36C Idle / 65C max load
    500GB Seagate Barracuda 7200rpm| OCZ 600watt SXS PSU
    LG E2050T LED monitor
    3DMark11 P4560


  5. #75

    Default Re: Ud3p & e8400

    Thanks for the see about the VTT to be put at 1.20
    been running orthos blend for 9 plus hours
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  6. #76
    Join Date
    Jun 2010
    Location
    USA
    Posts
    122

    Default Re: Ud3p & e8400

    I say thats stable :)
    ASUS P8P67 rev3.1 | i5 2500K @ 4.5Ghz | Vcore: 1.300
    MSI 460GTX Hawk Talon Attack (900/4000) | 23C Idle / 65C max load / +100mV
    Kingston HyperX | DDR3 1600Mhz | Corsair H60 | 36C Idle / 65C max load
    500GB Seagate Barracuda 7200rpm| OCZ 600watt SXS PSU
    LG E2050T LED monitor
    3DMark11 P4560


  7. #77

    Default Re: Ud3p & e8400

    11 hours now i will keep going
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  8. #78
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  9. #79

    Default Re: Ud3p & e8400

    Hey Lsdmeasap
    15 hours 2 min and secs
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  10. #80
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Page 8 of 10 FirstFirst ... 678910 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •