Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 10 123 ... LastLast
Results 1 to 10 of 96

Thread: Ud3p & e8400




  1. #1

    Default Ud3p & e8400

    Any suggestioms for a higher OC suggest away
    Thou the ram will be OCing



    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............Auto
    CPU Clock Ratio ..........................9x
    Fine CPU Clock Ratio.....................0.0
    CPU Frequency ........................... 3.60mhz (400X9) 3600MHz
    Clock Chip Control
    CPU Host Clock Control..................Enabled
    CPU Host Frequency (Mhz) ............400
    PCI Express Frequency (Mhz) .....100 lock
    C.I.A.2 .................................:[Disabled]
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................800 default
    PCI Express Clock Drive................900 default
    CPU Clock Skew (ps)....................0
    MCH Clock Skew (ps)...................0
    DRAM Performance Control
    Performance Enhance................Standard
    Extreme Memory Profile (X.M.P.).....disabled
    (G)MCH Frequency Latch............... AUTO
    System Memory Multiplier(SPD).......2.00D “D” Strap is for 400FSB
    Memory Frequency (Mhz) ..............800 Running 1:1 @ 800mhz
    DRAM Timing Table ................Manual

    Standard Timing Control
    CAS Latency Time............... 5
    tRCD ................................4
    tRP'...................................4
    tRAS..................................12
    Advanced Timing Control
    tRRD..........................................3
    tWTR..........................................4
    tWR............................................6
    tRFC...........................................52
    tRTP...........................................3
    Command Rate (CMD) .................2 T
    Driving Strength Profiles
    Driving Strength Channels A&B.......1066

    Channel A
    Static tRead Value..........................8
    tRD Phase0 Adjustment...................auto
    tRD Phase1 Adjustment...................auto
    tRD Phase2 Adjustment ..................auto
    tRD Phase3 Adjustment...................auto
    Trd2rd(Different Rank)....................auto
    Twr2wr(Different Rank)...................auto
    Twr2rd(Different Rank)................... auto
    Trd2wr(Same/Diff Rank)..................auto
    Dimm1 Clock Skew Control...............auto
    Dimm2 Clock Skew Control...............auto<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    DDR Write Training……………………………..auto

    Channel B
    Static tRead Value..........................8

    tRD Phase0 Adjustment...................auto
    tRD Phase1 Adjustment...................auto
    tRD Phase2 Adjustment ..................auto
    tRD Phase3 Adjustment...................auto
    Trd2rd(Different Rank)....................auto
    Twr2wr(Different Rank)...................auto
    Twr2rd(Different Rank)................... auto
    Trd2wr(Same/Diff Rank)..................auto
    Dimm1 Clock Skew Control...............auto
    Dimm2 Clock Skew Control...............auto<o:p></o:p>
    DDR Write Training……………………………..auto

    Motherboard Voltage Control
    Voltage Type.………... Manual <o:p></o:p>
    CPU<o:p></o:p>
    Load Line…………….Disabled
    CPU Vcore….……….....1.24375v <o:p></o:p>
    (cpu vid range 0.850v-1.36250v)<o:p></o:p>
    CPU Termination….....1.200v
    CPU PLL…………………...1.500V
    CPU Reference.…………Auto sets this well<o:p></o:p>
    <o:p></o:p>
    MCH/ICH
    MCH Core…………….....1.160V stability and boot
    MCH Reference….…….Auto
    MCH/DRAM Ref.….....Auto
    ICH I/O………………......1.500V
    ICH Core…………...…….1.100

    DRAM
    DRAM Voltage ……........1.840v
    DRAM Termination….....0.920v
    Channel A Reference…..0.920v
    Channel B Reference…..0.920v

    Advanced Settings
    Limit CPUID Max. to 3....................disabled
    No-Execute Memory Protect.............enabled
    CPU Enhanced Halt (C1E)................enabled throttles according to load
    C2/C2E State Support.....................disabled
    x C4/C4E State Support...................disabled
    CPU Thermal Monitor2(TM2).............enabled
    CPU EIST Function..........................disabled

    primed 24 hours and change
    Passed IBT Max on 20 passess
    Last edited by Tyreman; 07-23-2010 at 10:46 AM.
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ud3p & e8400

    If your temps are good, and you have a decent cooler you can easily run 4Ghz.

    In my signature is a review on your memory, with settings I used for several speeds on this ram, maybe that would give you some ideas?

    You should put MCH/Dram ref. on auto

  3. #3

    Default Re: Ud3p & e8400

    Yes, thats right I remember your ram critique!
    Thanks Much
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ud3p & e8400

    Cool, wasn't sure if you had seen that or not.

    If you use any settings from it, or you just need further help feel free to let us know and we will advise

  5. #5

    Default Re: Ud3p & e8400

    Update: will run with these settings on and on primed 24hrs at 425x9 3825mhz

    The only changes required to the template above for that were:

    Mch Core...........................1.200v

    Dram Voltage....................2.040
    Dram termination...............0.910v
    Channel A reference...........0.910v
    Channel B reference............0.910v

    Static T read...................... 9
    Ram 1:1 @ 850MHz
    Thats not bad for a real cool running unit and no other voltage or settings changes
    Last edited by Tyreman; 07-25-2010 at 10:42 PM.
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  7. #7

    Default Re: Ud3p & e8400

    upped the cpu host fequency to 429(9x429) 3861 3.86Ghz
    MCH core..................1.220v
    Ram @ 858 now

    no other changes
    still pretty good
    prime 95 no errors
    blend test as above was also.
    Last edited by Tyreman; 07-28-2010 at 07:17 PM.
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  8. #8
    kick's Avatar
    kick is offline Senior Member
    Join Date
    Feb 2009
    Location
    Europe,the wild wild west.
    Posts
    1,223

    Default Re: Ud3p & e8400

    hey again tyre,its been awhile

    775 quads and duals at hi fsb on ep-45 ud3
    Last edited by kick; 08-11-2010 at 07:45 PM.
    Current Systems:

    Asrock p67 Extreme6.............. Gigabyte EP-45 UD3 ...................... Gigabyte 73 PVM S2
    Intel i5 2500k 4.8ghz................ Intel Q8400 3.8ghz......................... Intel D820 2.8ghz
    Zalman 10x cooler.................... Coolermaster V8............................ HP cooler
    8GB Gskill ripjaw ddr3.............. 4GB Gskill PI ddr2.......................... 4GB samsung ddr2
    60GB ssd/500GB HDD .............. WD 1TB hdd.................................... Seagate 160GB hdd
    GTX 460 1GB x2 SLI ................. Msi 9600GT 512MB(died) ........... Onboard gx
    Win7 64 ,750w psu(ocz)............ Win7 64 ,520w psu,seasonic...... Win XP pro ,400w psu

    HEC 6A34 case . ....................... Jeantec R2 case............................ Packard Bell case

    hoping to upgrade to http://www.thinkgeek.com/stuff/41/habicase.shtml
    http://www.flixya.com/video/140325/Animal-launching

  9. #9

    Default Re: Ud3p & e8400

    Thanks
    I am taking my time with this one.
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  10. #10

    Default Re: Ud3p & e8400

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ..............Auto
    CPU Clock Ratio ..........................9x
    Fine CPU Clock Ratio.....................0.0
    CPU Frequency ........................... 3.60mhz (3600mhz) or 3.86 (3860mhz)
    Clock Chip Control
    CPU Host Clock Control..................Enabled
    CPU Host Frequency (Mhz) ............400(3600mhz) or 429 (3860mhz)
    PCI Express Frequency (Mhz) ....100 lock
    C.I.A.2 .................................:[Disabled]
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................800 default
    PCI Express Clock Drive................900 default
    CPU Clock Skew (ps)....................0
    MCH Clock Skew (ps)...................0
    DRAM Performance Control
    Performance Enhance................Standard
    Extreme Memory Profile (X.M.P.).....disabled
    (G)MCH Frequency Latch............... AUTO
    System Memory Multiplier(SPD).......2.00D “D” Strap 400FSB
    Memory Frequency (Mhz) ..............800 1:1(3600) or 858 1:1(3860mhz)
    DRAM Timing Table .......................Manual

    Standard Timing Control
    CAS Latency Time..............5
    tRCD ................................4
    tRP'...................................4
    tRAS.................................12
    Advanced Timing Control
    tRRD...........................................3
    tWTR..........................................4
    tWR............................................6
    tRFC...........................................52
    tRTP...........................................3
    Command Rate (CMD) ....................2 T
    Driving Strength Profiles
    Driving Strength Channels A&B.......1066

    Channel A
    Static tRead Value..........................8(3600mhz) or 9 (3860mhz)
    tRD Phase0 Adjustment...................auto
    tRD Phase1 Adjustment...................auto
    tRD Phase2 Adjustment ..................auto
    tRD Phase3 Adjustment...................auto
    Trd2rd(Different Rank)....................auto
    Twr2wr(Different Rank)...................auto
    Twr2rd(Different Rank)...................auto
    Trd2wr(Same/Diff Rank)..................auto
    Dimm1 Clock Skew Control...............auto
    Dimm2 Clock Skew Control...............auto
    DDR Write Training………………………..auto

    Channel B
    Static tRead Value..........................8(3600mhz) or 9 (3860mhz)

    tRD Phase0 Adjustment...................auto
    tRD Phase1 Adjustment...................auto
    tRD Phase2 Adjustment ..................auto
    tRD Phase3 Adjustment...................auto
    Trd2rd(Different Rank)....................auto
    Twr2wr(Different Rank)...................auto
    Twr2rd(Different Rank)................... auto
    Trd2wr(Same/Diff Rank)..................auto
    Dimm1 Clock Skew Control...............auto
    Dimm2 Clock Skew Control...............auto
    DDR Write Training………………………..auto

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    Load Line…………….Disabled
    CPU Vcore….……….....1.24375v (cpu vid range 0.850v-1.36250v)
    CPU Termination….....1.200v
    CPU PLL…………………...1.500V
    CPU Reference.…………Auto sets this well or 0.760v for stock VTT of 1.200v

    MCH/ICH
    MCH Core…………….....1.160V(3600mhz) or 1.220v (3860mhz) stability and boot
    MCH Reference….…….Auto or 0.760v for stock sets with CPU Ref above
    MCH/DRAM Ref.….....0.920v(3600mhz) or 0.910v(3860mhz) or AUTO works fine
    ICH I/O………………......1.500V
    ICH Core…………...…….1.100v

    DRAM
    DRAM Voltage ……........1.840v(3600mhz) or 2.040v for(3860mhz)
    DRAM Termination…......0.920v 0.910v “
    Channel A Reference……0.920v 0.910v “
    Channel B Reference…..0.920v 0.910v “

    Advanced Settings
    Limit CPUID Max. to 3......................disabled
    No-Execute Memory Protect.............enabled
    CPU Enhanced Halt (C1E)................enabled throttles according to load
    C2/C2E State Support.....................disabled
    x C4/C4E State Support...................disabled
    CPU Thermal Monitor2(TM2).............enabled
    CPU EIST Function..........................disabled

    cpu Temps around 52/53 load
    Although not the fastest currently......the unit is VERY cool and VERY stable.
    24hours plus of Prime Blend
    Last edited by Tyreman; 07-30-2010 at 06:50 AM. Reason: cleaned up
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

Page 1 of 10 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •