Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 8 of 8

Thread: 1600 Ram kit Post's as 1066




  1. #1
    Join Date
    Jul 2010
    Location
    USA Michigan
    Posts
    7

    Default 1600 Ram kit Post's as 1066

    Greetings all :)

    New build here, having some voltage issue ATM, problem is that my 1600 ram shows up as 1066, from what i have seen this isnt uncommon. i will post my BIOS template below and my Sig contains my system setup, other than the fact that im running WIN7 64bit
    Checked each stick by removing them all and rebooting with one at a time, all went well

    If something seems amiss could you help me out please

    for the time being theres no OCing going on, but any thing that could help with the voltage issue would be Great........Thanks


    BIOS Template - Gigabyte GA-X58 - UD3R MB Intelligent Tweaker (M.I.T.)

    Code:
     
    CPU Clock Ratio [21x] 
    CPUFrequency 2.8GHz (133*21)
    >Advanced CPU Core Features [Press Enter]:
    Intel(R) Turbo Boost Tech [Disabled]
    CPU Cores Enabled [All]
    CPU Multi Threading [Enabled]
    CPU Enhanced Halt (C1E) [Enabled] 
    C3/C6/C7 State Support [Disabled]
    CPU Thermal Monitor [Enabled]
    CPU EIST Function [Enabled]
    Bi-Directional PROCHOT [Enabled]
     
    QPI Clock Ratio [Auto] 
    QPI Link Speed 4.8GHz 
    Uncore Clock Ratio [Auto] 
    Uncore Frequency 3200MHz
    >>>>> Standard Clock Control
      
    Base Clock(BCLK) Control [Enabled] 
    (BCLK Frequency (Mhz) [133] 
    Extreme Memory Profile (X.M.P.) [Disabled]
    System Momory Multiplier (SPD) [12.0] 
    Memory Frequency (MHz) 1066 1600 
    PCI Express Frequency (MHz) [100] 
     
    >>>>> Advanced Clock Control 
    CPU Clock Drive [ 800mV]
    PCI Express Clock Drive [ 900mV]
    CPU Clock Skew [ 0ps]
    IOH Clock Skew [ 0ps]
     
    Extreme Memory Profile (X.M.P.) [Disabled] 
    System Memory Multiplier (SPD) [12.0] 
    memory frequency (mhz) 1066 1600
    Performance Enhance [Standard]
    DRAM Timing Selectable (SPD) [Expert] 
    Profile DDR Voltage 1.5V Profile 
    QPI Voltage 1.175V 
    Channel Interleaving 6 [Auto] 
    Rank Interleaving 4 [Auto] 
     
    >>>>> Channel A 
    >Channel A Timing Settings [Press Enter] 
    >Channel A Turnaround Settings [Press Enter] 
    >>>>> Channel B 
    >Channel B Timing Settings [Press Enter] 
    >Channel B Turnaround Settings [Press Enter] 
    >>>>> Channel C 
    >Channel C Timing Settings [Press Enter] 
    >Channel C Turnaround Settings [Press Enter] 
     
    Channel A
    CAS Latency Time 8 [8]
    tRCD 8 [8]
    tRP 8 [8]
    tRAS 20 [24]
     
    Channel B 
    CAS Latency Time 8 [8]
    tRCD 8 [8]
    tRP 8 [8]
    tRAS 20 [24]
     
    Channel C
    CAS Latency Time 8 [8]
    tRCD 8 [8]
    tRP 8 [8]
    tRAS 20 [24]
     
    >>>>>Channel A Advanced Timing Control
    tRC 27 [AUTO]
    tRRD 4 [AUTO]
    tWTR 4 [AUTO]
    tWR 8 [AUTO] tWTP 19 [AUTO]
    tWL 7 [AUTO]
    tRFC 60 [AUTO]
    tRTP 4 [AUTO]
    tFAW 16 [AUTO]
    Command Rate (CMD) 1 [2]
    >>>>>Channel A Misc Timing Control 
    B2B CAS Delay - [AUTO]
    Round Trip Latency 51 [AUTO] 
    Advanced Voltage Control [Press Enter]:
    Load Line Calibration [Standard]
    CPU Vcore 1.21250v [AUTO] 
    X Dynamic Vcore (DVID) +0.00000V AUTO
    QPI/VTT Voltage 1.175v [AUTO]
    CPU PLL 1.800v [AUTO]
    >>>MCH / ICH
    PCIE 1.500v [AUTO]
    QPI PLL 1.100v [AUTO]
    IOH Core 1.100v [AUTO]
    ICH I/O 1.500v [AUTO]
    ICH Core 1.100v [AUTO]
    
    >>>DRAM
    DRAM Voltage 1.500v [1.600V]
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO] 
     
    CMOS Setup Utility
    Isochronous Support [Enabled] 
    Virtualization Technology [Enabled]
    "Responce From Gigabyte Support thread"

    Please make a new thread with all your info here, so we can better keep track of this as we help.

    Do you see a Red Warning box when you enter the MIT Section of the BIOS?

    Can you please link us to your memory kit.

    I see you are not setting your QPI/Vtt this may be the issue, and surely will be if you are seeing a red warning box.

    I also see you have C1E and EIST enabled, Intel Speedstep, so your CPU and memory would be downclocked when idle so this may be the issue as well.

    Thanks for the reply

    I created this new thread per your request.

    Yes i get a red Warning - http://img.villagephotos.com/p/2004-...ot%20Error.jpg

    Ram Kit Link - Newegg.com - G.SKILL Ripjaws Series 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL8T-6GBRM

    What should the QPI/Vtt Voltage be?
    As far as the C1E and EIST goes, if i dont need it on thats fine with me

    BTW, once this Ram is sorted i plan on throwing another 3 sticks in, what effect will that have


    Thanks
    Last edited by Taurus; 07-24-2010 at 08:30 AM.
    Motherboard: GigaByte GA-X58A-UD3R Rev#2: Bios Version: FA
    Cpu: Intel i7 930 (2.8 Ghz)
    Ram: G-Skill F3-12800CL8T-6TGBRM DDR3-1600 PC3-12800 2048x3 CL8-8-8-24 (1.6v)
    PSU: Corsair HX1000
    CPU Cooler: Corsair H50
    GPU: BFG 285GTX SLI
    Case: Atnec 1200

  2. #2
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: 1600 Ram kit Post's as 1066

    theres nothing wrong with your sticks,1066 is the default speed that the mb sets the ram at,you need to enable spd,then set manual and raise the memory multiplier to give you 1600mhz or just under as the amount of bclk you set for example 133x12=1596,when you overclock by raising the bclk number it will affect the ram speed so you will need to lower ram multiplier to suite

    for stock clocks try cpu voltage on normal setting in voltage list,qpi/vtt on 1.30000 c1e can be disabled,keep everything else on and then select balanced power saving profile in windows 7 power saving options

    System Memory Multiplier (SPD) [12.0]<<< currently set at 12x this is what you raise lower to change the ram speed in mhz,it will be in even multi's like 8x 10x 12x 14x ect
    Last edited by wazza300; 07-24-2010 at 09:53 AM.
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  3. #3
    Join Date
    Jul 2010
    Location
    USA Michigan
    Posts
    7

    Default Re: 1600 Ram kit Post's as 1066

    Will give this a try, i believe i did something simular except for the QPI/Vtt i do think mine is set to default 1.175v ATM will set to 1.3000v and let her rip :)


    Will post back


    Thanks
    Motherboard: GigaByte GA-X58A-UD3R Rev#2: Bios Version: FA
    Cpu: Intel i7 930 (2.8 Ghz)
    Ram: G-Skill F3-12800CL8T-6TGBRM DDR3-1600 PC3-12800 2048x3 CL8-8-8-24 (1.6v)
    PSU: Corsair HX1000
    CPU Cooler: Corsair H50
    GPU: BFG 285GTX SLI
    Case: Atnec 1200

  4. #4
    Join Date
    Jul 2010
    Location
    USA Michigan
    Posts
    7

    Default Re: 1600 Ram kit Post's as 1066

    Set: QPI to [1.295v]
    Set: CPU Enhanced Halt (CIE) [Disabled]
    Set: System Memory Multiplier - [12]
    Set: DRAM Voltage - [1.60V]
    You said to keep everything else on...............sorry not sure what everything else is ...............

    Restarted a few time to see if it would error out, Sofar so good
    DDR3 1600Mhz on Post

    A short list of what i have set below

    Code:
     
    CPU Clock Ratio - [21x]
    QPI Link Speed - 4.8GHz (No Choice) 
    Base Clock Control - [Enabled]
    BCLK Frequency - [133]
    Performance Enhance - [Standard]
    Extreme Memory Profile - [Disabled]
    System Memory Multiplier - [12]
    CPU Enhanced Halt [Disabled] 
    QPI/Vtt [1.295v]
    DRAM Timing Selectable - [Expert]
    
    CAS Latency Time - 8
    tRCD - 8
    tRP - 8
    tRAS - 24
    
    Enter these for the other three as well.
    
    Channel A Timing Settings
    Channel B Timing Settings
    Channel C Timing Settings
    
    Advanced Timings
    Command Rate - 2
    
    Advanced Voltage Control
    
    DRAM Voltage - [1.60V]
    Rest to AUTO
    Questions
    1- Should i F12 Load CMOS from BIOS?
    2- What is the QPI Clock Ratio for? What does Slow Mode do?

    Do we have a good complete stock BIOS template
    the one i posted here at the top of this thread is a semi complete BIOS Template for the X58A-UD3R rev2, but im not sure what the best stock settings should be


    Thanks for the help
    Last edited by Taurus; 07-24-2010 at 11:54 AM.
    Motherboard: GigaByte GA-X58A-UD3R Rev#2: Bios Version: FA
    Cpu: Intel i7 930 (2.8 Ghz)
    Ram: G-Skill F3-12800CL8T-6TGBRM DDR3-1600 PC3-12800 2048x3 CL8-8-8-24 (1.6v)
    PSU: Corsair HX1000
    CPU Cooler: Corsair H50
    GPU: BFG 285GTX SLI
    Case: Atnec 1200

  5. #5
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: 1600 Ram kit Post's as 1066

    you can set qpi link speed to 36x,and your uncore freq will be twice what the ram multiplier is then add one to it,so for example 10x ram multi will be 21x uncore freq and so on,everything else can be left on auto or enabled in bios,just manually set you ram speed/multiplier/timings/voltages and set cpu and qpi/vtt voltages and you should be fine

    load optimized defaults or clear cmos to get all stock settings back but it will wipe any bios settings that you have set yourself so make a note beforehand,every cpu/mb is different so it will use less or more cpu/qpi voltage when at stock settings,if your stable then no need to reset cmos

    if you have stock intel cooler you can clock to 3.2ghz without changing anything from those settings i gave you apart from lowering the ram multiplier to give you 1600mhz or slightly less when you use higher bclk as it changes depending what bclk you set,remember to set uncore freq too following the 2x ram multi +1 rule
    Last edited by wazza300; 07-24-2010 at 09:25 PM.
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  7. #7
    Join Date
    Jul 2010
    Location
    USA Michigan
    Posts
    7

    Default Re: 1600 Ram kit Post's as 1066

    Yes
    Were good to go

    Wazza thanks for the help

    Was afraid to try your last post :) im just not that familar with the BIOS
    what i posted last works (sofar) if what i posted is good.............were good to go


    Thanks
    Motherboard: GigaByte GA-X58A-UD3R Rev#2: Bios Version: FA
    Cpu: Intel i7 930 (2.8 Ghz)
    Ram: G-Skill F3-12800CL8T-6TGBRM DDR3-1600 PC3-12800 2048x3 CL8-8-8-24 (1.6v)
    PSU: Corsair HX1000
    CPU Cooler: Corsair H50
    GPU: BFG 285GTX SLI
    Case: Atnec 1200

  8. #8
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •