Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: 775 quads and duals at hi fsb on ep-45 ud3




  1. #1
    kick's Avatar
    kick is offline Senior Member
    Join Date
    Feb 2009
    Location
    Europe,the wild wild west.
    Posts
    1,223

    Cool 775 quads and duals at hi fsb on ep-45 ud3

    Intel Core 2 Quad + probably duals too, settings for 1960-2000 mhz fsb
    24/7 stable (4000 hrs+)

    Q8400 and Q8200
    4.0 or 3.5 Ghz(2000 fsb)

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 8x (x7 Q8200)
    CPU Frequency ...........................: 4.0Ghz (500x8)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 500 Mhz
    PCI Express Frequency (Mhz) .........: 100
    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive.........................: <<< 800mV
    PCI Express Clock Drive.................: <<< 700mV
    CPU Clock Skew (ps).....................: <<< 0ps
    MCH Clock Skew (ps).....................: <<< 50ps


    DRAM Performance Control
    Performance Enhance...................: [TURBO]
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2:00D
    Memory Frequency (Mhz) ..............: 1000
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time..............................5
    tRCD ...............................................5
    tRP'.............................................. ...5
    tRAS.............................................. .15

    Advanced Timing Control
    tRRD.............................................. .3 [Auto]
    tWTR.............................................. 3 [Auto]
    tWR............................................... .6 [Auto]
    tRFC.............................................. 54 [Auto]
    tRTP.............................................. .3 [Auto]
    Command Rate (CMD) .......................0 [Auto]

    Channel A Timing Settings
    Static tRead Value.........................: 9
    tRD Phase0 Adjustment...................:0 Auto
    tRD Phase1 Adjustment...................:0 Auto
    tRD Phase2 Adjustment ..................:0 Auto
    tRD Phase3 Adjustment...................:0 Auto

    Trd2rd(Different Rank)....................:8 Auto
    Twr2wr(Different Rank)...................:8 Auto
    Twr2rd(Different Rank)...................:8 Auto
    Trd2wr(Same/Diff Rank)..................:9 Auto

    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto
    DDR Write Training.........................:Auto

    Channel A Driving Strength Profiles
    Driving Strength ................... Auto


    Channel B
    Static tRead Value.........................: 9
    tRD Phase0 Adjustment...................:0 Auto
    tRD Phase1 Adjustment...................:0 Auto
    tRD Phase2 Adjustment ..................:0 Auto
    tRD Phase3 Adjustment...................:0 Auto

    Trd2rd(Different Rank)....................:8 Auto
    Twr2wr(Different Rank)...................:8 Auto
    Twr2rd(Different Rank)...................:8 Auto
    Trd2wr(Same/Diff Rank)..................:9 Auto

    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto
    DDR Write Training.........................:Auto

    Channel B Driving Strength Profiles
    Driving Strength ................... Auto

    Motherboard Voltage Control
    CPU
    Load-Line Calibration.....................: Enabled
    CPU Vcore….……….........................: 1.39375v(1.36V max cpuz)
    CPU Termination….........................: 1.38v
    CPU PLL………………….......................: 1.59v
    CPU Referen.………….......................: 0.874v

    MCH/ICH
    MCH Core…………….........................: 1.42v
    MCH Reference……........................: 0.874v
    MCH/DRAM Ref…….........................: 1.09v
    ICH I/O……...................................: 1.57v
    ICH Core…….................................: 1.10v

    DRAM
    DRAM Voltage ……..........................: 2.20V
    DRAM Termination ……....................: 1.09V
    Channel A Reference…....................: 0.900v [Auto]
    Channel B Reference…....................: 0.900v [Auto]

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Enabled]

    ------------------------------------------------------
    3.92 or 3.43 Ghz (1960fsb)



    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 7x (x8 Q8400)
    CPU Frequency ...........................: 3.43ghz (490x7)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 490 Mhz
    PCI Express Frequency (Mhz) .........: 100
    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive.........................: <<< 800mV
    PCI Express Clock Drive.................: <<< 700mV
    CPU Clock Skew (ps).....................: <<< 0ps
    MCH Clock Skew (ps).....................: <<< 50ps


    DRAM Performance Control
    Performance Enhance...................: [TURBO]
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2:00D
    Memory Frequency (Mhz) ..............: 980
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time..............................5
    tRCD ...............................................5
    tRP'.............................................. ...5
    tRAS.............................................. .15

    Advanced Timing Control
    tRRD.............................................. .3 [Auto]
    tWTR.............................................. 3 [Auto]
    tWR............................................... .6 [Auto]
    tRFC.............................................. 54 [Auto]
    tRTP.............................................. .3 [Auto]
    Command Rate (CMD) .......................0 [Auto]

    Channel A Timing Settings
    Static tRead Value.........................: 9
    tRD Phase0 Adjustment...................:0 Auto
    tRD Phase1 Adjustment...................:0 Auto
    tRD Phase2 Adjustment ..................:0 Auto
    tRD Phase3 Adjustment...................:0 Auto

    Trd2rd(Different Rank)....................:8 Auto
    Twr2wr(Different Rank)...................:8 Auto
    Twr2rd(Different Rank)...................:8 Auto
    Trd2wr(Same/Diff Rank)..................:9 Auto

    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto
    DDR Write Training.........................:Auto

    Channel A Driving Strength Profiles
    Driving Strength ................... Auto


    Channel B
    Static tRead Value.........................: 9
    tRD Phase0 Adjustment...................:0 Auto
    tRD Phase1 Adjustment...................:0 Auto
    tRD Phase2 Adjustment ..................:0 Auto
    tRD Phase3 Adjustment...................:0 Auto

    Trd2rd(Different Rank)....................:8 Auto
    Twr2wr(Different Rank)...................:8 Auto
    Twr2rd(Different Rank)...................:8 Auto
    Trd2wr(Same/Diff Rank)..................:9 Auto

    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto
    DDR Write Training.........................:Auto

    Channel B Driving Strength Profiles
    Driving Strength ................... Auto

    Motherboard Voltage Control
    CPU
    Load-Line Calibration.....................: Enabled
    CPU Vcore….……….........................: 1.3625v (1.33V max cpuz)
    CPU Termination….........................: 1.36v
    CPU PLL………………….......................: 1.59v
    CPU Referen.………….......................: 0.861v

    MCH/ICH
    MCH Core…………….........................: 1.38v
    MCH Reference……........................: 0.861v
    MCH/DRAM Ref…….........................: 1.03v
    ICH I/O……...................................: 1.57v
    ICH Core…….................................: 1.100v

    DRAM
    DRAM Voltage ……..........................: 2.08V
    DRAM Termination ……....................: 1.03V
    Channel A Reference…....................: 0.900v [Auto]
    Channel B Reference…....................: 0.900v [Auto]

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: n/a
    __________________

    These settings may or may not work with Q9450,Q9550,Q9650 cpu's,(higher power draw).
    but they should be ok with lower Q9000 cpus.
    Yes I know memory type makes a difference,and that some people are gonna say theyre running 1920 fsb and below with like 1.3V cpu core and 1.3vMCH.
    C2D cpu's should be able to run even higher on these settings.
    Well gl to ya,these are settings I use for 1960-2000 and its also a handy storage reference for "threads I started"

    reposted.. to cut on replies
    Current Systems:

    Asrock p67 Extreme6.............. Gigabyte EP-45 UD3 ...................... Gigabyte 73 PVM S2
    Intel i5 2500k 4.8ghz................ Intel Q8400 3.8ghz......................... Intel D820 2.8ghz
    Zalman 10x cooler.................... Coolermaster V8............................ HP cooler
    8GB Gskill ripjaw ddr3.............. 4GB Gskill PI ddr2.......................... 4GB samsung ddr2
    60GB ssd/500GB HDD .............. WD 1TB hdd.................................... Seagate 160GB hdd
    GTX 460 1GB x2 SLI ................. Msi 9600GT 512MB(died) ........... Onboard gx
    Win7 64 ,750w psu(ocz)............ Win7 64 ,520w psu,seasonic...... Win XP pro ,400w psu

    HEC 6A34 case . ....................... Jeantec R2 case............................ Packard Bell case

    hoping to upgrade to http://www.thinkgeek.com/stuff/41/habicase.shtml
    http://www.flixya.com/video/140325/Animal-launching

  2. #2
    Join Date
    Feb 2010
    Location
    indonesia
    Posts
    124

    Default Re: 775 quads and duals at hi fsb on ep-45 ud3

    Hi kick :) nice SS ... i wanna ask at 4ghz FSB 500 for Q8400 why do you set PCI express clock drive to 700mv? default is 900mv right? is it affecting on graphic card's performmance??
    Intel Core i5 2500k @3.33ghz (4.5ghz 1.255v)
    MSI 67A5-GD80( B3)
    Patriot Viper Extreme D2 PXD34G13600LLK 8-9-8-24 2T 1.65v (1600mhz 8-9-8-24 2T 1.65v)
    Western Digital
    Caviar Black500G SATA2 32mb
    MSI GTX570TFII OC 750/1000 (930/1100 1.088v)
    Thermalright Archon + TY140 + CF III
    Corsair TX-650
    Windows7 Ultimate x64 SP1
    -Open rig-

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •