Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 26 of 26

Thread: new gigabyte user with GA-X58A-UD5 rev. 1 board ...help with win 7 64 bit install




  1. #21
    Join Date
    Aug 2010
    Location
    USA
    Posts
    11

    Default Re: new gigabyte user with GA-X58A-UD5 rev. 1 board ...help with win 7 64 bit install

    Ok here's the update so far.

    I Enabled Intel Turbo Boost Tech. and also disabled CPU Enh. halt C1E and the system boot fine.

    So i figured why not try these settings from wazza. I have entered them all and the system is running and booting with no errors.

    on " DRAM Timing Selectable (SPD) [Auto] manual set to 8x.

    I don't see that. I only see Auto Quick or Expert choices there.

    I was able to set 8x in the " System Memory Multiplyer (SPD) in the adv. memory.

    Lastly i haven't touched my Channel A & B memory timings yet. I guess i can change them to 7-7-7-20 as suggested for all channels ?

    Where would i see my current clock speed and temps ?

    Sorry for all the newbie questions and thanks again.

    Rex
    Quote Originally Posted by wazza300 View Post
    see my sig for 3.8ghz overclock try that first,you might need to underclock your ram speed a little as it depends on what bclk you set,

    use these settings and see how you get on

    CPU Clock Ratio 21x

    Advanced Core Features [Press Enter]:

    Intel(R) Turbo Boost Tech................[Disabled] enable this
    CPU Cores Enabled........................[All]
    CPU Multi-Threading......................[Enabled]
    CPU Enhanced Halt (C1E)..................[Enabled]disable this
    C3/C6/C7 State Support...................[Enabled]
    CPU Thermal Monitor......................[Enabled]
    CPU EIST Function........................[Enabled]
    Bi-Directional PROCHOT...................[Enabled]

    QPI Clock Ratio..........................[Auto]set to 36x
    [I]QPI Link Speed........................[4.8ghz]
    [I]Uncore Clock Ratio....................[Auto] set to 17x always 2x ram multi then add 1 to it
    Uncore Frequency.........................2667MHz

    >>>>> Standard Clock Control <<<<<

    Base Clock (BCLK) Control................[Disabled]
    BCLK Frequency ..........................[133] .....set to 180
    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[Auto] manual
    [I]Memory Frequency (MHz)................1066
    PCI Express Frequency (MHz)..............[Auto]
    C.I.A.2..................................[Disabled]

    >>>>> Advanced Clock Control <<<<<

    CPU Clock Drive..........................[ 800mV]
    PCI Express Clock Drive..................[ 900mV]
    CPU Clock Skew...........................[ 0ps]
    IOH Clock Skew...............................[0ps]

    Advanced Memory Settings:

    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[Auto]...set manual and 8x
    [I]Memory Frequency (MHz)................1066 will be 1440mhz with a 180 bclk and 8x ram multi
    Performance Enhance (SPD)............. [Standard]...set to standard
    DRAM Timing Selectable (SPD)............ [Auto] manual set to 8x
    [I]Profile DDR Voltage .................. 1.5V ignore
    Profile QPI Voltage .................. 1.175V ignore
    Channel Interleaving.....................6 [Auto]
    Rank Interleaving........................ 4 [Auto]

    >>>>> Channel A & B

    Channel A Timing Settings [Press Enter]:
    Cas Latency Time........................[7]7
    tRCD....................................[7]7 set those yourself
    tRP.....................................[7]7
    tRAS...................................[20]20

    >>>>> Advanced Timing Control

    tRC....................................27[Auto]
    tRRD...................................4[Auto]
    tWTR...................................4[Auto]
    tWR....................................8[Auto]
    tWTP...................................19Auto]
    tWL....................................7[Auto]
    tRFC...................................60[Auto]
    tRTP..................................4[Auto]
    tFAW...................................16[Auto]
    Command Rate (CMD).................. 1 [Auto].set to command rate 1

    >>>>> Misc Timing Control

    B2B Cas Delay.......................... - [Auto]
    Round Trip Latency.....................41[Auto] ???


    Channel A Turnaround Settings [Press Enter]:<<<<<< Different DIMMs........................[Auto]
    On The Same Rank.......................[Auto]

    >>>>> Channel A Writes Followed By Writes<<<<<<<<<<<< OR this

    Different DIMMs........................[Auto]
    Different DIMMs........................[Auto]
    On The Same Rank.......................[Auto]


    Advanced Voltage Settings:

    ******Mother Board Voltage Control ******
    Voltage Types............Normal......Current
    --------------------------------------------

    >>> CPU
    Load Line Calibration...................[Auto]
    CPU Vcore..................1.18125v..[1.xv]set to the normal voltage setting in list not auto
    Dynamic Vcore DVID........+0.00000v normal setting in list
    QPI/VTT Voltage..........1.100v.....[1.295]set to around 1.30000v
    >>> MCH/ICH
    PCH Core....................1.050v.....[Auto]
    CPU PLL......................1.800v.....[Auto]

    >>> DRAM
    DRAM Voltage..............1.500v.....[1.500v???] 1.5v or 1.66v depending on ram spec on module
    DRAM Termination.........0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]


    Miscellaneous Settings:[/SIZE]

    Isochronous Support....................[Enabled]
    Virtualisation technology..............[Enabled]
    USB Storage Detect ....................[Enabled] Located In Integrated Peripherals Page

    EDIT: you can use @bios to save your oc bios settings to a bios file but please dont flash with @bios use q-flash to flash the oc bios with all your oc settings on,use coretemp to monitor your temps dont let them go over 80c if you can help it,you will need to test and stress for stability/temps with linx or prime95,if you want a lower overclock and 1600mhz then let me know
    Last edited by rexdiver; 08-07-2010 at 05:13 AM.

  2. #22
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: new gigabyte user with GA-X58A-UD5 rev. 1 board ...help with win 7 64 bit install

    you might not be stable with 7-7-7-20 timings idk,try it and see if not set to 8-8-8-24 you wont notice any difference,look in easytune/cpu to see your current clock speed,you will need to load the cpu to see it at full speed if you have balanced profile in win7 power saving options or you can change that to high performance setting but the cpu wont underclock and throttle voltages when its idle,download cpu-z too which is good for monitoring and coretemp for your core temperatures,when stressing cpu dont let it go above 80c

    p.s. if you did go with 7-7-7-20 timings you would need to increase qpi/vtt voltage
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  3. #23
    Join Date
    Aug 2010
    Location
    USA
    Posts
    11

    Default Re: new gigabyte user with GA-X58A-UD5 rev. 1 board ...help with win 7 64 bit install

    Ok i changed the memory to 7-7-7-20 and also the command rate to 1.

    I have to doublecheck but i think the Round trip latency showed 51 not 41 as posted.

    I'm attaching an image from easytune and will attach another in the next post.

    Windows 7 power settings in balanced were changed to Never when i installed the other day. Do you mean Processor power management state ?

    Those are currently 5% / Active / 100% respectively.

  4. #24
    Join Date
    Aug 2010
    Location
    USA
    Posts
    11

    Default Re: new gigabyte user with GA-X58A-UD5 rev. 1 board ...help with win 7 64 bit install

    Here is the processor page from easytune.

    Looks like 3.96 ?

    Thanks again and stable so far. What should i test with first, second, third etc. ?

  5. #25
    Join Date
    Aug 2010
    Location
    USA
    Posts
    11

    Default Re: new gigabyte user with GA-X58A-UD5 rev. 1 board ...help with win 7 64 bit install

    Thought i'd ad a coretemp pic. This is the system at dashboard no programs running other than background services etc.

  6. #26
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: new gigabyte user with GA-X58A-UD5 rev. 1 board ...help with win 7 64 bit install

    yes i forgot you had a 930 chip,they have a 22x cpu multi compared with a 920's 21x,just disable intel turbo boost and use 21x or set bclk to 171 its up to you really,heres what i meant with balanced/high performance setting in windows but i see that the cpu is throttling anyway but by using balanced it lets you disable c1e in the bios and it will still throttle the cpu at idle,in high performance it wont throttle at all

    Last edited by wazza300; 08-07-2010 at 07:05 AM.
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •