Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 16 FirstFirst 123412 ... LastLast
Results 11 to 20 of 154

Thread: i7 980x & GA-X58A-UD5 (rev. 1.0)




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: i7 980x & GA-X58A-UD5 (rev. 1.0)

    Just glad you were able to bend them back without causing more damage!

    4.4-4.5 isn't going to be as easy as it sounds, it could be I suppose but I doubt it.

    You wanna test that before looking into getting your ram at 2000Mhz, or do you want to try it all at once?

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: i7 980x & GA-X58A-UD5 (rev. 1.0)

    4.5 with ram at 2000Mhz, drop the ram down to x10 to test getting your CPU to boot at 4.5Ghz

    Advanced CPU Features:
    CPU Clock Ratio ................................ [27x]
    Intel(R) Turbo Boost Tech .................. [Disabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Disabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Disabled]
    Bi-Directional PROCHOT ..................... [Disabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. x44
    Uncore Frequency .......................... x18-24
    Isonchronous Frequency ..................[Disabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... 167 (167x27=4.5Ghz)
    PCI Express Frequency (MHz) ........... [100]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [x12]
    DRAM Timing Selectable (SPD) .......... [Manual - Expert]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 9
    tRCD ....................................... 9
    tRP ......................................... 9
    tRAS ....................................... 24

    ^^ you know what timings I assume for 2000Mhz ^^



    ##Channel A Advanced Timing Control##
    tRC ........................................Auto
    tRRD ....................................... Auto
    tWTR ...................................... Auto
    tWR ........................................ Auto
    tWTP ....................................... Auto
    tWL ........................................ Auto
    tRFC ....................................... 88
    tRTP ....................................... Auto
    tFAW ...................................... Auto
    Command Rate (CMD) ................ 2T << 1T

    ##Channel A Misc Timing Control##
    Round Trip Latency ................... Auto

    B2B CAS Delay .......................... Auto


    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Enabled - Level 1]
    CPU Vcore ............................... 1.32-1.45+ All up to your CPU
    QPI/VTT Voltage 1.150v ............ 1.355-1.46
    CPU PLL 1.800v ....................... 1.8-1.86

    MCH/ICH
    PCIE 1.500v ........................... 1.5
    QPI PLL 1.100v ....................... 1.2-1.24
    IOH Core 1.100v ..................... 1.14-1.2
    ICH I/O 1.500v ....................... 1.5
    ICH Core 1.1v ........................ 1.14

    DRAM
    DRAM Voltage 1.500v .............. 1.66
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  3. #13

    Default Re: i7 980x & GA-X58A-UD5 (rev. 1.0)

    Quote Originally Posted by Lsdmeasap View Post
    Just glad you were able to bend them back without causing more damage!

    4.4-4.5 isn't going to be as easy as it sounds, it could be I suppose but I doubt it.

    You wanna test that before looking into getting your ram at 2000Mhz, or do you want to try it all at once?
    I'm going to test as well from here on I'll be running test as long as temps stay low I'll keep going high. at 4.2 on my 930 temps were idle at 35-40 but with this chip thats not the case. I just want to try and get as high as possible prime, linx and occt as well as memtest. I know it will take some time but thats expected. what is the max safe voltage for this chip because some guys I see pushing theirs to 1.53+ (that scares me) especially when I am doing 4.2 at lower voltage. Maybe I got lucky with this chip but I guess time will tell.

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: i7 980x & GA-X58A-UD5 (rev. 1.0)

    It all depends on your chip, if you get low voltage at 4.2 that doesn't mean 4.4 is only a little bit away, it might take a massive voltage jump to get to 4.4.

    I'd try to keep things under 1.45-1.5, but if temps are still great there more would be up to you.

  5. #15

    Default Re: i7 980x & GA-X58A-UD5 (rev. 1.0)

    okay now one last question for you tonight while I look for my previous settings (hopefully I saved them somewhere) when overclocking my memory before there where a few rules I had to follow like with the qpi/vtt <.5 of Dram Voltage and I think there was another one uncore and memory speed? uncore had to be atleast 2 times memory speed or something is this correct or is it now 1-2 times the speed? also with QPI Link Speed is 44 what this should be at at all times i know on my 930 I believe I had it lower at 36 or something. Also what is the deal with the i7 980x (ES)?
    Last edited by Shauntx; 08-08-2010 at 05:10 PM.

  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: i7 980x & GA-X58A-UD5 (rev. 1.0)

    For QPI/Vtt you just need to be sure to keep QPI/Vtt within .5 of the dram voltage, meaning if you use 1.65V dram voltage the QPI/Vtt must be 1.15V or above

    For 980X uncore only needs to be 1.5x memory multiplier, but still can be anywhere above that if you want. So the new rule for you on Uncore would be uncore multi must be (1.5x - 2+) x memory multiplier

    So for 10x memory multi the lowest you need to use would be 15, but you can still use 15-20+ if you want..... Simple = Uncore must be 15-xx for 10x memory multi

    QPI link just keep under 8.0Gt/s and you should be fine

  7. #17

    Default Re: i7 980x & GA-X58A-UD5 (rev. 1.0)

    okay thanks I will test and get back.

  8. #18

    Default Re: i7 980x & GA-X58A-UD5 (rev. 1.0)

    okay update at 4.5GHz:
    - Intel Burn 20 Passes (memory underclocked)
    - Linx 20 Passes (memory underclocked)
    - Mem Test: Overclocked memory to 2000MHz Currently at 103.3% Coverage 0 Errors (will let run to 1000% coverage)
    DRAM:1.780v - QPI/VTT: 1.315v - CPU Vcore: 1.4000v - Temps idle average 29c Max load 47c average (highest core hits 55-57c

    Future test:
    - Prime95
    - Benchmark Test (does anyone know of any good test for this that are free?)

  9. #19
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: i7 980x & GA-X58A-UD5 (rev. 1.0)

    you could try cinebench cpu benchmark its free, you were lucky to straighten those pins
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  10. #20

    Default Re: i7 980x & GA-X58A-UD5 (rev. 1.0)

    Yes tell me about it I was about to buy a new motherboard when I saw the pictures but good thing they were just slightly bent to the left which took about 5 minutes fixing. If they were all badly bent I doubt I would have been able to fix them.

Page 2 of 16 FirstFirst 123412 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •