Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 13 of 14 FirstFirst ... 311121314 LastLast
Results 121 to 130 of 136

Thread: help overclocking Q6600 with GA-EP45 UD3L




  1. #121
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    only fear is when i shut it down then start the pc after like 20min or so i don't get bootloop if does what should i do to change. been stable thou running fine no error on prime95 more than 6 hours max temp load 58c
    GA-EP45-UD3L REV 1.1 bios F9
    INTEL Core 1 Quad Q6600 2.4ghz to 3.2ghz
    Zalman CNPS 9700 LED 2800 RPM
    Corsair CM2X PC-6400 2X 1024MB http://www.corsair.com/_datasheets/CM2X1024-6400.pdf
    Kingston KHX6400 2x2048MB http://www.valueram.com/datasheets/KHX6400D2K2_4G.pdf
    Zotac GTS 250 1024GB DDR3
    Antec Nine hundred 2 case http://www.antec.com/Believe_it/product.php?id=NzIy
    PSU Antec Truepower series TP650 http://www.antec.com/Believe_it/product.php?id=MTc1OQ==
    DELL 20" Monitor

  2. #122
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    Core temps 58c are great for this OC, and lets hope the bootloop question remains hypothetical :)

  3. #123
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    well i turned the pc on this morning power came on then went off then boot up again went into windows man how can i solve that problem where it just boots up right away right into windows.

    but everything else is stable runn's smooth beside that i just got fine tune the boot up problem.

    but i have shut down pc wait for like 5min to 10 for it cool down then turn pc on for that first power shut off to come then it boots up again run's.
    Last edited by namal245; 08-18-2010 at 06:04 PM.
    GA-EP45-UD3L REV 1.1 bios F9
    INTEL Core 1 Quad Q6600 2.4ghz to 3.2ghz
    Zalman CNPS 9700 LED 2800 RPM
    Corsair CM2X PC-6400 2X 1024MB http://www.corsair.com/_datasheets/CM2X1024-6400.pdf
    Kingston KHX6400 2x2048MB http://www.valueram.com/datasheets/KHX6400D2K2_4G.pdf
    Zotac GTS 250 1024GB DDR3
    Antec Nine hundred 2 case http://www.antec.com/Believe_it/product.php?id=NzIy
    PSU Antec Truepower series TP650 http://www.antec.com/Believe_it/product.php?id=MTc1OQ==
    DELL 20" Monitor

  4. #124
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    yes take look this settings
    Motherboard: GA-EP45-UD3L: Rev 1.1: F9:
    Cpu: Q6600
    Ram: Brand, Model/Part#, Link to your ram's specs
    Power Supply Unit: Antec, Model TP650, ^650

    note: replace all ?? with the value displayed in your bios.
    ----> Replace "Auto" with manually set values.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [8]
    Fine CPU Clock Ratio ----------------- : [0.0] <-- ignore if not available
    CPU Frequency ---------------------: 2.40 to 3.2ghz <-- this is set by your bios

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [400]
    PCI Express Frequency (Mhz) ---------- : [100] <--- Set to 100, never leave this on Auto

    C.I.A.2 ------------------------------ : [Disabled]

    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : [800mv]
    PCI Express Clock Drive -------------- : [800mv]
    CPU Clock Skew (ps) ------------------ : [0ps]
    MCH Clock Skew (ps) ------------------ : [0ps]

    DRAM Performance Control
    Performance Enhance ------------------- : [Standard] <--- set to STANDARD when overclocking
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled] <--- Leave this Disabled
    (G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [2.00D] <-- this is the setting that you are using
    Memory Frequency (Mhz) ---------------- : [667]/800
    DRAM Timing Selectable ---------------- : [Auto] <-- set to MANUAL for overclocking

    Standard Timing Control
    CAS Latency Time -------- 5 ---------- : [5]
    tRCD ------------------- 5---------- : [5]
    tRP --------------------- 5 ---------- : [5]
    tRAS ------------------- 15 ---------- : [15]

    Advanced Timing Control
    tRRD ------------------- 3---------- : [Auto]
    tWTR ------------------- 11---------- : [Auto]
    tWR --------------------- 5 ---------- : [Auto]
    tRFC ------------------- 52 ---------- : [Auto]
    tRTP ------------------- 5 ---------- : [Auto]
    Command Rate (CMD) -------------------- : [Auto] <--- Auto or 0 is OK

    Driving Strength Profiles
    Driving Strength ---------800mhz : Press Enter <--- press ENTER to modify memory sub-timings when overclocking

    Channel A
    Static tRead Value ---------------------7 : [8]
    tRD Phase0 Adjustment ------------------0 : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment ------------------0 : [Auto]
    tRD Phase2 Adjustment ------------------0 : [Auto]
    tRD Phase3 Adjustment ------------------0 : [Auto]
    Trd2rd(Different Rank) -----------------6 : [Auto]
    Twr2wr(Different Rank) -----------------6 : [Auto]
    Twr2rd(Different Rank) ----------------- 5: [Auto]
    Trd2wr(Same/Diff Rank) ---------------- 8: [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps

    Channel B
    Static tRead Value --------------------- 7: [8]
    tRD Phase0 Adjustment ------------------0 : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment ------------------ 0: [Auto]
    tRD Phase2 Adjustment ------------------ 0: [Auto]
    tRD Phase3 Adjustment ------------------ 0: [Auto]
    Trd2rd(Different Rank) -----------------6 : [Auto]
    Twr2wr(Different Rank) -----------------6 : [Auto]
    Twr2rd(Different Rank) ----------------- 5: [Auto]
    Trd2wr(Same/Diff Rank) ----------------- 8: [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps

    Motherboard Voltage Control
    CPU
    Voltage Types------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Enabled]
    CPU Vcore --------------- 1.3000v---- : [1.4000v]

    CPU Termination --------- 1.200V* ----- : [1.200v]
    CPU PLL ----------------- 1.550V* ----- : [1.550v]

    CPU Reference ----------- 0.805V* ----- : [Auto]
    CPU Reference2 ---------- ?.???V* ----- : [Auto]

    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.260v]
    MCH Reference ----------- 0.760V ------- : [Auto]
    MCH/DRAM Ref ------------ ?.???V ------ : [Auto] N/A
    ICH I/O ----------------- 1.550V ------- : [1.550V]
    ICH Core ---------------- 1.100V ------- : [auto]
    DRAM
    DRAM Voltage ------------ 1.800V ------- : [1.94v]
    DRAM Termination -------- ?.???V ------- : [Auto] N/A
    Channel A Reference ----- ?.???V ------- : [Auto]N/A
    Channel B Reference ----- ?.???V ------- : [Auto]N/A

    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Disabled]
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function --------------------- : [Disabled]
    Virtualization Technology -------------- : [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect ------------- : [Disabled]
    GA-EP45-UD3L REV 1.1 bios F9
    INTEL Core 1 Quad Q6600 2.4ghz to 3.2ghz
    Zalman CNPS 9700 LED 2800 RPM
    Corsair CM2X PC-6400 2X 1024MB http://www.corsair.com/_datasheets/CM2X1024-6400.pdf
    Kingston KHX6400 2x2048MB http://www.valueram.com/datasheets/KHX6400D2K2_4G.pdf
    Zotac GTS 250 1024GB DDR3
    Antec Nine hundred 2 case http://www.antec.com/Believe_it/product.php?id=NzIy
    PSU Antec Truepower series TP650 http://www.antec.com/Believe_it/product.php?id=MTc1OQ==
    DELL 20" Monitor

  5. #125
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    Only looped twice? when it happens enter BIOS M.I.T and see if you get the red failed OC warning message.
    See if you can run IBM(Intel Burn Test) Or LinX with 3GB of memory 5-10 loops. Those stress tests may indicate of there's not enough vcore, but they create much more heat than Prime95, so keep an eye on core temperatures.

  6. #126
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    it turn off once then boots up again goes into window's vcore already at 1.40
    GA-EP45-UD3L REV 1.1 bios F9
    INTEL Core 1 Quad Q6600 2.4ghz to 3.2ghz
    Zalman CNPS 9700 LED 2800 RPM
    Corsair CM2X PC-6400 2X 1024MB http://www.corsair.com/_datasheets/CM2X1024-6400.pdf
    Kingston KHX6400 2x2048MB http://www.valueram.com/datasheets/KHX6400D2K2_4G.pdf
    Zotac GTS 250 1024GB DDR3
    Antec Nine hundred 2 case http://www.antec.com/Believe_it/product.php?id=NzIy
    PSU Antec Truepower series TP650 http://www.antec.com/Believe_it/product.php?id=MTc1OQ==
    DELL 20" Monitor

  7. #127
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    i just did 5 runs on intel burn test said successful on standard mode heat was high with the spikes up and down 164.69 seconds
    GA-EP45-UD3L REV 1.1 bios F9
    INTEL Core 1 Quad Q6600 2.4ghz to 3.2ghz
    Zalman CNPS 9700 LED 2800 RPM
    Corsair CM2X PC-6400 2X 1024MB http://www.corsair.com/_datasheets/CM2X1024-6400.pdf
    Kingston KHX6400 2x2048MB http://www.valueram.com/datasheets/KHX6400D2K2_4G.pdf
    Zotac GTS 250 1024GB DDR3
    Antec Nine hundred 2 case http://www.antec.com/Believe_it/product.php?id=NzIy
    PSU Antec Truepower series TP650 http://www.antec.com/Believe_it/product.php?id=MTc1OQ==
    DELL 20" Monitor

  8. #128
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    What were core temps? Can't tell by the time need GFlops, for quad standard not enough, need 3GB memory at least.
    Spikes during the tests, what temp differences?

    EDIT: you can set IBT to generate a text report or capture the window (Alt+PrintScreen will capture active window only)

  9. #129
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    core temps around 80 max 85 c cpu tem around 79 to 81

    IntelBurnTest v2.50
    Created by AgentGOD
    ----------------------------

    Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
    Clock Speed: 3.20 GHz
    Active Physical Cores: 4
    Total System Memory: 6142 MB

    Stress Level: Custom (3048 MB)
    Testing started on 8/18/2010 6:45:08 AM
    Time (s) Speed (GFlops) Result
    [06:47:34] 120.880 40.4488 3.496686e-002
    [06:49:59] 120.767 40.4866 3.496686e-002
    [06:52:25] 120.990 40.4120 3.496686e-002
    [06:54:51] 121.018 40.4028 3.496686e-002
    [06:57:17] 121.594 40.2114 3.496686e-002
    Testing ended on 8/18/2010 6:57:17 AM
    Test Result: Success.
    ----------------------------
    GA-EP45-UD3L REV 1.1 bios F9
    INTEL Core 1 Quad Q6600 2.4ghz to 3.2ghz
    Zalman CNPS 9700 LED 2800 RPM
    Corsair CM2X PC-6400 2X 1024MB http://www.corsair.com/_datasheets/CM2X1024-6400.pdf
    Kingston KHX6400 2x2048MB http://www.valueram.com/datasheets/KHX6400D2K2_4G.pdf
    Zotac GTS 250 1024GB DDR3
    Antec Nine hundred 2 case http://www.antec.com/Believe_it/product.php?id=NzIy
    PSU Antec Truepower series TP650 http://www.antec.com/Believe_it/product.php?id=MTc1OQ==
    DELL 20" Monitor

  10. #130
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    Looks fine to me.

    EDIT: didn't see the temps, 85c core temp is a bit too high to run IBT for this processor. Seems that this cooler is not made for quads.
    EDIT2: what does Core Temp (or Real Temp, whichever yoy used) show as TJmax?
    Last edited by Chike; 08-18-2010 at 07:13 PM.

Page 13 of 14 FirstFirst ... 311121314 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •