Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 14 FirstFirst 1234513 ... LastLast
Results 21 to 30 of 136

Thread: help overclocking Q6600 with GA-EP45 UD3L




  1. #21
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    BTW I have just noticed you are mixing the 2 memory kits, this may become a problem, if it does maybe remove the 2 GB kit and leave adding it for later.
    On post do you get a "flex mode" message?

  2. #22
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    yes it say's max VID is 1.3 on txt report dumb

  3. #23
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    i have not check that yet on post to see if say's flex mode let me check both sticks are running at same speed 667 even thou that kingston stick is realy pc6400 kingston run's them at 333 they sell them all like this u have overclock the memory to get to 800mhz they said realy stupid.

  4. #24
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    i will set the Mch core voltage to 1.26 should be enough for 6GB see how it run's.

  5. #25
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    They are runnong according to the lowest max frequency that is programed to SPD of both kits.
    The kingston is programed to 667, 800 is an OC and needs higher voltage (1.85v, maybe a bit more)
    Start with 1.2v MCH Core, increase if needed.

    EDIT: please add your system specs to your signature it help new users who read the thread.

  6. #26
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    ok so i am going maybe take out kingston ram later if have problems just run Corsair i will get matching pair or just upgrade to faster 1366 memory kit later on
    GA-EP45-UD3L REV 1.1 bios F9
    INTEL Core 1 Quad Q6600 2.4ghz to 3.2ghz
    Zalman CNPS 9700 LED 2800 RPM
    Corsair CM2X PC-6400 2X 1024MB http://www.corsair.com/_datasheets/CM2X1024-6400.pdf
    Kingston KHX6400 2x2048MB http://www.valueram.com/datasheets/KHX6400D2K2_4G.pdf
    Zotac GTS 250 1024GB DDR3
    Antec Nine hundred 2 case http://www.antec.com/Believe_it/product.php?id=NzIy
    PSU Antec Truepower series TP650 http://www.antec.com/Believe_it/product.php?id=MTc1OQ==
    DELL 20" Monitor

  7. #27
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    i notice your case Chike if got better case with allot fans your full load temps would drop by like 15 degree's easily.
    GA-EP45-UD3L REV 1.1 bios F9
    INTEL Core 1 Quad Q6600 2.4ghz to 3.2ghz
    Zalman CNPS 9700 LED 2800 RPM
    Corsair CM2X PC-6400 2X 1024MB http://www.corsair.com/_datasheets/CM2X1024-6400.pdf
    Kingston KHX6400 2x2048MB http://www.valueram.com/datasheets/KHX6400D2K2_4G.pdf
    Zotac GTS 250 1024GB DDR3
    Antec Nine hundred 2 case http://www.antec.com/Believe_it/product.php?id=NzIy
    PSU Antec Truepower series TP650 http://www.antec.com/Believe_it/product.php?id=MTc1OQ==
    DELL 20" Monitor

  8. #28
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    Quote Originally Posted by namal245 View Post
    ok so i am going maybe take out kingston ram later if have problems just run Corsair i will get matching pair or just upgrade to faster 1366 memory kit later on
    Better Leave the kingson in and take out the Corsair, you may decide that 4GB are enough.

    Quote Originally Posted by namal245 View Post
    i notice your case Chike if got better case with allot fans your full load temps would drop by like 15 degree's easily.
    Unlikely to get my temps any lower. I have 1 front and one side intake and exhusted air is only 2c above ambiant.
    Even with open case and room fan over it temps won't change much.

  9. #29
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    multiplier to 2.00B all reading 667/667 at 3.00a it was 667/1000 it was crashing
    GA-EP45-UD3L REV 1.1 bios F9
    INTEL Core 1 Quad Q6600 2.4ghz to 3.2ghz
    Zalman CNPS 9700 LED 2800 RPM
    Corsair CM2X PC-6400 2X 1024MB http://www.corsair.com/_datasheets/CM2X1024-6400.pdf
    Kingston KHX6400 2x2048MB http://www.valueram.com/datasheets/KHX6400D2K2_4G.pdf
    Zotac GTS 250 1024GB DDR3
    Antec Nine hundred 2 case http://www.antec.com/Believe_it/product.php?id=NzIy
    PSU Antec Truepower series TP650 http://www.antec.com/Believe_it/product.php?id=MTc1OQ==
    DELL 20" Monitor

  10. #30
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    Oh you already set your FSB to 333MHz? Use 2.40B then for DDR-800, DRAM Voltage 1.85-1.9v.
    Please post your full current settings.
    Last edited by Chike; 08-13-2010 at 07:52 PM.

Page 3 of 14 FirstFirst 1234513 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •