Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 7 of 14 FirstFirst ... 56789 ... LastLast
Results 61 to 70 of 136

Thread: help overclocking Q6600 with GA-EP45 UD3L




  1. #61
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    Much better read but write is way low. I wonder why that is, my writes are always better than read.
    Chweck if Performance Level in MemSet is still 7.
    Try setting Driving strength 800 on both channels, and Static tRead Value 6 (this may require a notch or two more MCH Core) on both channels.

  2. #62
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    lol got memory blue screen of death lol i up the mch core and put the 800Mhz on both drive will run memtest to see if any problems.
    GA-EP45-UD3L REV 1.1 bios F9
    INTEL Core 1 Quad Q6600 2.4ghz to 3.2ghz
    Zalman CNPS 9700 LED 2800 RPM
    Corsair CM2X PC-6400 2X 1024MB http://www.corsair.com/_datasheets/CM2X1024-6400.pdf
    Kingston KHX6400 2x2048MB http://www.valueram.com/datasheets/KHX6400D2K2_4G.pdf
    Zotac GTS 250 1024GB DDR3
    Antec Nine hundred 2 case http://www.antec.com/Believe_it/product.php?id=NzIy
    PSU Antec Truepower series TP650 http://www.antec.com/Believe_it/product.php?id=MTc1OQ==
    DELL 20" Monitor

  3. #63
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    yes i will have iron out the memory today have some issue today lol failed 4 min's on ortho's test i went back into bios put static reading back to auto and drive back to auto.
    GA-EP45-UD3L REV 1.1 bios F9
    INTEL Core 1 Quad Q6600 2.4ghz to 3.2ghz
    Zalman CNPS 9700 LED 2800 RPM
    Corsair CM2X PC-6400 2X 1024MB http://www.corsair.com/_datasheets/CM2X1024-6400.pdf
    Kingston KHX6400 2x2048MB http://www.valueram.com/datasheets/KHX6400D2K2_4G.pdf
    Zotac GTS 250 1024GB DDR3
    Antec Nine hundred 2 case http://www.antec.com/Believe_it/product.php?id=NzIy
    PSU Antec Truepower series TP650 http://www.antec.com/Believe_it/product.php?id=MTc1OQ==
    DELL 20" Monitor

  4. #64
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    What is Performance Level in MemSet with auto settings? How much MCH did you apply?

  5. #65
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    Performance lvl 7 i had on 6 run into problems Mch is now 1.22
    GA-EP45-UD3L REV 1.1 bios F9
    INTEL Core 1 Quad Q6600 2.4ghz to 3.2ghz
    Zalman CNPS 9700 LED 2800 RPM
    Corsair CM2X PC-6400 2X 1024MB http://www.corsair.com/_datasheets/CM2X1024-6400.pdf
    Kingston KHX6400 2x2048MB http://www.valueram.com/datasheets/KHX6400D2K2_4G.pdf
    Zotac GTS 250 1024GB DDR3
    Antec Nine hundred 2 case http://www.antec.com/Believe_it/product.php?id=NzIy
    PSU Antec Truepower series TP650 http://www.antec.com/Believe_it/product.php?id=MTc1OQ==
    DELL 20" Monitor

  6. #66
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    when hit the power button pc turns on then off then on again then boots up fine when it is not overclocked i just hit power on booots up goes right into windows.
    GA-EP45-UD3L REV 1.1 bios F9
    INTEL Core 1 Quad Q6600 2.4ghz to 3.2ghz
    Zalman CNPS 9700 LED 2800 RPM
    Corsair CM2X PC-6400 2X 1024MB http://www.corsair.com/_datasheets/CM2X1024-6400.pdf
    Kingston KHX6400 2x2048MB http://www.valueram.com/datasheets/KHX6400D2K2_4G.pdf
    Zotac GTS 250 1024GB DDR3
    Antec Nine hundred 2 case http://www.antec.com/Believe_it/product.php?id=NzIy
    PSU Antec Truepower series TP650 http://www.antec.com/Believe_it/product.php?id=MTc1OQ==
    DELL 20" Monitor

  7. #67
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    Multi boots means failed settings, always enter BIOS again and change them till it boots right away.
    Can you post full settings that have failed?

  8. #68
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    but my memory write is very slow for sure need to be realy tweaked
    GA-EP45-UD3L REV 1.1 bios F9
    INTEL Core 1 Quad Q6600 2.4ghz to 3.2ghz
    Zalman CNPS 9700 LED 2800 RPM
    Corsair CM2X PC-6400 2X 1024MB http://www.corsair.com/_datasheets/CM2X1024-6400.pdf
    Kingston KHX6400 2x2048MB http://www.valueram.com/datasheets/KHX6400D2K2_4G.pdf
    Zotac GTS 250 1024GB DDR3
    Antec Nine hundred 2 case http://www.antec.com/Believe_it/product.php?id=NzIy
    PSU Antec Truepower series TP650 http://www.antec.com/Believe_it/product.php?id=MTc1OQ==
    DELL 20" Monitor

  9. #69
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    Motherboard: GA-EP45-UD3L: Rev 1.1: F9:
    Cpu: Q6600
    Ram: Brand, Model/Part#, Link to your ram's specs
    Power Supply Unit: Antec, Model TP650, ^650

    note: replace all ?? with the value displayed in your bios.
    ----> Replace "Auto" with manually set values.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [9]
    Fine CPU Clock Ratio ----------------- : [0.0] <-- ignore if not available
    CPU Frequency ---------------------: 2.40 to 3ghz <-- this is set by your bios

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [333]
    PCI Express Frequency (Mhz) ---------- : [100] <--- Set to 100, never leave this on Auto

    C.I.A.2 ------------------------------ : [Disabled]

    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : [800mv]
    PCI Express Clock Drive -------------- : [800mv]
    CPU Clock Skew (ps) ------------------ : [0ps]
    MCH Clock Skew (ps) ------------------ : [0ps]

    DRAM Performance Control
    Performance Enhance ------------------- : [Standard] <--- set to STANDARD when overclocking
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled] <--- Leave this Disabled
    (G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [2.40] <-- this is the setting that you are using
    Memory Frequency (Mhz) ---------------- : [667]/800
    DRAM Timing Selectable ---------------- : [Auto] <-- set to MANUAL for overclocking

    Standard Timing Control
    CAS Latency Time -------- 5 ---------- : [Auto]
    tRCD ------------------- 5---------- : [Auto]
    tRP --------------------- 5 ---------- : [Auto]
    tRAS ------------------- 15 ---------- : [Auto]

    Advanced Timing Control
    tRRD ------------------- 3---------- : [Auto]
    tWTR ------------------- 11---------- : [Auto]
    tWR --------------------- 5 ---------- : [Auto]
    tRFC ------------------- 52 ---------- : [Auto]
    tRTP ------------------- 5 ---------- : [Auto]
    Command Rate (CMD) -------------------- : [Auto] <--- Auto or 0 is OK

    Driving Strength Profiles
    Driving Strength --------- : Press Enter <--- press ENTER to modify memory sub-timings when overclocking

    Channel A
    Static tRead Value ---------------------7 : [Auto]
    tRD Phase0 Adjustment ------------------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps

    Channel B
    Static tRead Value --------------------- 7: [Auto]
    tRD Phase0 Adjustment ------------------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps

    Motherboard Voltage Control
    CPU
    Voltage Types------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Enabled]
    CPU Vcore --------------- 1.3000v---- : [1.3000v]

    CPU Termination --------- 1.200V* ----- : [1.200v]
    CPU PLL ----------------- 1.550V* ----- : [1.550v]

    CPU Reference ----------- 0.805V* ----- : [Auto]
    CPU Reference2 ---------- ?.???V* ----- : [Auto]

    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.220v]
    MCH Reference ----------- 0.760V ------- : [Auto]
    MCH/DRAM Ref ------------ ?.???V ------ : [Auto] N/A
    ICH I/O ----------------- 1.550V ------- : [1.550V]
    ICH Core ---------------- 1.100V ------- : [1.100V]
    DRAM
    DRAM Voltage ------------ 1.800V ------- : [1.86v]
    DRAM Termination -------- ?.???V ------- : [Auto] N/A
    Channel A Reference ----- ?.???V ------- : [Auto]N/A
    Channel B Reference ----- ?.???V ------- : [Auto]N/A

    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Disabled]
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function --------------------- : [Disabled]
    Virtualization Technology -------------- : [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect ------------- : [Disabled]
    Last edited by namal245; 08-14-2010 at 08:17 PM.
    GA-EP45-UD3L REV 1.1 bios F9
    INTEL Core 1 Quad Q6600 2.4ghz to 3.2ghz
    Zalman CNPS 9700 LED 2800 RPM
    Corsair CM2X PC-6400 2X 1024MB http://www.corsair.com/_datasheets/CM2X1024-6400.pdf
    Kingston KHX6400 2x2048MB http://www.valueram.com/datasheets/KHX6400D2K2_4G.pdf
    Zotac GTS 250 1024GB DDR3
    Antec Nine hundred 2 case http://www.antec.com/Believe_it/product.php?id=NzIy
    PSU Antec Truepower series TP650 http://www.antec.com/Believe_it/product.php?id=MTc1OQ==
    DELL 20" Monitor

  10. #70
    Join Date
    Aug 2010
    Location
    Montreal
    Posts
    91

    Default Re: help overclocking Q6600 with GA-EP45 UD3L

    i got slove the multiboot allot work to do to fix this lol might entire day s h it
    GA-EP45-UD3L REV 1.1 bios F9
    INTEL Core 1 Quad Q6600 2.4ghz to 3.2ghz
    Zalman CNPS 9700 LED 2800 RPM
    Corsair CM2X PC-6400 2X 1024MB http://www.corsair.com/_datasheets/CM2X1024-6400.pdf
    Kingston KHX6400 2x2048MB http://www.valueram.com/datasheets/KHX6400D2K2_4G.pdf
    Zotac GTS 250 1024GB DDR3
    Antec Nine hundred 2 case http://www.antec.com/Believe_it/product.php?id=NzIy
    PSU Antec Truepower series TP650 http://www.antec.com/Believe_it/product.php?id=MTc1OQ==
    DELL 20" Monitor

Page 7 of 14 FirstFirst ... 56789 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •