Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 34

Thread: New Machine: GA-X58 UD3R -f6 / Xeon w3520 Processor - OC Help?




  1. #21
    Join Date
    Aug 2010
    Location
    Earth
    Posts
    50

    Default Re: New Machine: GA-X58 UD3R -f6 / Xeon w3520 Processor - OC Help?

    OK,

    Got it.

    Can I go higher? My temps are are still low. If I can get to 4gb, that would be great.


    Thank you all so very much for helping me. Really. I am a Gigabyte man to the death!


    ~ Diggi

  2. #22
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: New Machine: GA-X58 UD3R -f6 / Xeon w3520 Processor - OC Help?

    Ya if your temps are still good then you can go higher, just keep an eye on your temps is all.

  3. #23
    Join Date
    Aug 2010
    Location
    Earth
    Posts
    50

    Default Re: New Machine: GA-X58 UD3R -f6 / Xeon w3520 Processor - OC Help?

    Couple of things gentlemen:



    I bumped the cpu multiplier to 190, but I got a BSOD shortly after I was able to boot to the desktop. I am assuming I need to adjust some other things as well? I am not sure what else to change?


    Also, I have a w3520 CPU. Is that a 930 as mentioned in the OC recommendation?


    I also could not find this anywhere in the bios: “Extreme Memory Profile (X.M.P) ......... [Disabled] --> Disable XMP and manually adjust your ram latencies”

    And for this setting: "Load Line Calibration ...................... [disabled]", I only have “Auto”, “Standard”, “Level - 1” or “Level - 2”, I cannot “disable” it.


    Thank you again for all of this!

    ~ Diggi

  4. #24
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: New Machine: GA-X58 UD3R -f6 / Xeon w3520 Processor - OC Help?

    ou might need more qpi/vtt and cpu voltage,the zeon is just the server version of the 920 chip i think,does it have a 21x cpu multi? if so you can enable turbo boost the 930 chips have a 22x cpu multi and need more voltage if set to that,leave llc on auto if you cant disable it
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  5. #25
    Join Date
    Aug 2010
    Location
    Earth
    Posts
    50

    Default Re: New Machine: GA-X58 UD3R -f6 / Xeon w3520 Processor - OC Help?

    the highest I can go is 21x cpu, with Turbo Boost enabled, or disabled.

    You recommendation on going to 4ghz?


    peace,

    ~ Diggi

  6. #26
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: New Machine: GA-X58 UD3R -f6 / Xeon w3520 Processor - OC Help?

    yh you can use a 21x190 now for 4ghz or 21x200 for 4.2ghz,enable intel turbo boost,i dont know where you are with voltages but leave them as they are and if it fails up them both little bit at a time and test (qpi/vtt and cpu v)
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  7. #27
    Join Date
    Aug 2010
    Location
    Earth
    Posts
    50

    Default Re: New Machine: GA-X58 UD3R -f6 / Xeon w3520 Processor - OC Help?

    Is there a Voltage that I simply should not go over?

    My temps are still low at 3.99Ghz.

  8. #28
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: New Machine: GA-X58 UD3R -f6 / Xeon w3520 Processor - OC Help?

    its up to you really and whether you run your pc 24 hours a day,personally i wouldnt go over 1.38-1.4v for either qpi/vtt and cpu
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  9. #29
    Join Date
    Aug 2010
    Location
    Earth
    Posts
    50

    Default Re: New Machine: GA-X58 UD3R -f6 / Xeon w3520 Processor - OC Help?

    For some reason, it all of a sudden decided not to be "stable". So now I am back at 3.60Ghz, and I can't figure out what happened.


    ~ Diggi

  10. #30
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: New Machine: GA-X58 UD3R -f6 / Xeon w3520 Processor - OC Help?

    you might need to load optimized defaults and re-enter the oc settings,make a note of them before you do it as it will wipe them,same thing for clearing the cmos by jumping the mb pins near the battery or removing it for 30mins
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

Page 3 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •