Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 14 of 14 FirstFirst ... 4121314
Results 131 to 134 of 134

Thread: GA-X58A-UD3R rev 2.0 new build having issues




  1. #131
    Join Date
    Oct 2010
    Location
    Newcastle, Australia
    Posts
    59

    Default Re: GA-X58A-UD3R rev 2.0 new build having issues

    hey guys been awhile, but teh hot aussie summer is over so good ambiet temps for some ocing, not much has happened with my rig, asides i currently have one gpu rma'd as it was running hot and crashing my system, i have since installed a side case fan, 120mm, to get some more air in which has dropped my temps by 1c-2c degrees, ocing wise i tried anitt77 setup for 3.6ghz, it passed 5 intel burn tests i now it wasnt a big test however i pushed onto 3.8ghz, i ran 15 runs on high no bsod, max temp was 61c, fans were still set at normal :) template used is below.

    Advanced CPU Features:
    CPU Clock Ratio ............................. [23x]
    DP Frequency ................................ 3.80GHz (165x23)
    Intel(R) Turbo Boost Tech ................... [Disabled]
    CPU Cores Enabled ........................... [All]
    CPU Multi Threading ......................... [Enabled]
    CPU Enhanced Halt (C1E) ..................... [Disabled] use balanced profile in win7 power saving options
    C3/C6/C7 State Support ...................... [enabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ........................... [enabled]
    Virtualization Technology ................... [enabled]
    Bi-Directional PROCHOT ...................... [Enabled]

    Uncore & QPI Features:
    QPI Link Ratio .............................. [x36]
    QPI Link Speed .............................. 5.94GHz - - should this be around 7.xxghz?? Uncore Frequency ............................ [x21]
    Isonchronous Frequency ...................... [Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... [165]
    PCI Express Frequency (MHz) .............. [100]


    Advanced Clock Control:
    CPU Clock Drive ............................ [800mV]
    PCI Express Clock Drive .................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Advanced DRAM Features:
    Performance Enhance .................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [10.0]
    Memory Frequency (Mhz) ................ 1650
    DRAM Timing Selectable (SPD) .......... [Quick]
    Profile DDR Voltage ................... xxxxV
    Profile QPI Voltage ................... xxxxV
    Channel Interleaving .................. [Auto]
    Rank Interleaving ..................... [Auto]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ........................... 8 [Auto]
    tRCD ....................................... 8 [Auto]
    tRP ........................................ 8 [Auto]
    tRAS ....................................... 24 [Auto]


    ##Channel A Advanced Timing Control##
    tRC ........................................ [Auto]
    tRRD ....................................... [Auto]
    tWTR ....................................... [Auto]
    tWR ........................................ [Auto]
    tWTP ....................................... [Auto]
    tWL ........................................ [Auto]
    tRFC ....................................... [Auto]
    tRTP ....................................... [Auto]
    tFAW ....................................... [Auto]
    Command Rate (CMD) ......................... [Auto]

    ##Channel A Misc Timing Control##
    B2B CAS Delay .............................. [Auto]
    Round Trip Latency ......................... [Auto]

    Advanced Voltage Control:

    CPU
    Load Line Calibration ...................... [disabled]
    CPU Vcore .......................... 1.275V [normal]
    DVID ...................................+0.0500V
    QPI/VTT Voltage .................... 1.175V [1.315V]
    CPU PLL ............................ 1.800V [auto]

    MCH/ICH
    PCIE .............................. 1.500v [auto]
    QPI PLL ........................... 1.100v [auto]
    IOH Core ........................... 1.100v [auto]
    ICH I/O ............................ 1.500v [auto]
    ICH Core ........................... 1.100v [auto]

    DRAM
    DRAM Voltage ....................... 1.500V [1.660V]
    DRAM Termination ................... 0.750v [AUTO]
    Ch-A Data VRef. .................... 0.750v [AUTO]
    Ch-B Data VRef. .................... 0.750v [AUTO]
    Ch-C Data VRef. .................... 0.750v [AUTO]
    Ch-A Address VRef. ................. 0.750v [AUTO]
    Ch-B Address VRef. ................. 0.750v [AUTO]
    Ch-C Address VRef. ................. 0.750v [AUTO]

    was that enough testing to confirm this oc as stable or shou;d i run a prime95 and somthing else?

    to get to 4.0 ghz, what do you reccomend??
    Mobo - GA-X58A-UD3R v2 bios version FB
    Ram - Mushkin 998826 ridgeback-(3x2gb) 6gbrm 6-8-6-24 1T 1.65v Qpi-1.355v
    Cpu - i7 950 3.07mhz
    Cooling - Corsair h70
    Gpu - 2 x evga nividia gtx 460 1gb external exhaust models
    Psu - Corsair hx850
    Hdd - 1tb western digital black caviar
    Case - Antec nine hundred and two
    Os - Windows 7 home premium 64bit

  2. #132
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: GA-X58A-UD3R rev 2.0 new build having issues

    Just raise bclk for 4ghz and keep voltages as they are,if unstable add one/two clicks more in dvid,you might need 1.32v qpi/vtt
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  3. #133
    uDraft's Avatar
    uDraft is offline Junior Member
    Join Date
    Apr 2011
    Location
    central Ohio
    Posts
    25

    Default Re: GA-X58A-UD3R rev 2.0 new build having issues

    I had similar problems with this board when I plugged HDs in to GSATA2 ports

  4. #134
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X58A-UD3R rev 2.0 new build having issues

    Ya, GSATA ports should only be used once you use up all the Intel ports, and even then once you do start to use them do not install any additional drivers unless you plan to make a RAID (Slow) on the GSATA ports

Page 14 of 14 FirstFirst ... 4121314

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •