Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 14 of 14 FirstFirst ... 4121314
Results 131 to 134 of 134

Thread: GA-X58A-UD5 Rev2 problems bios FB




  1. #131
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X58A-UD5 Rev2 problems bios FB

    Try these

    Advanced CPU Features:
    CPU Clock Ratio ............................. [21x]
    DP Frequency ................................ 2.8GHz (166x21)
    Intel(R) Turbo Boost Tech ................... [Enabled]
    CPU Cores Enabled ........................... [All]
    CPU Multi Threading ......................... [Enabled]
    CPU Enhanced Halt (C1E) ..................... [Disabled] use balanced profile in win7 power saving options
    C3/C6/C7 State Support ...................... [enabled] << Disable
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ........................... [enabled] << Disable
    Virtualization Technology ................... [enabled]
    Bi-Directional PROCHOT ...................... [Enabled]

    Uncore & QPI Features:
    QPI Link Ratio .............................. [auto] << Set 26 or x44
    QPI Link Speed ..............................
    Uncore Frequency ............................ [auto] << Set 20-22 if using x10 memory multiplier
    Isonchronous Frequency ...................... [Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Disabled]
    BCLK Frequency (MHz) ..................... [133] << 133 or 166 as shown above???
    PCI Express Frequency (MHz) .............. [AUTO]


    Advanced Clock Control:
    CPU Clock Drive ............................ [800mV]
    PCI Express Clock Drive .................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Advanced DRAM Features:
    Performance Enhance .................... [Standard] Extreme
    System Memory Multiplier (SPD) ........ [10]set to this to give you 1333mhz ram speed
    Memory Frequency (Mhz) ................ 1333
    DRAM Timing Selectable (SPD) .......... [Quick] << Expert, then set each channel main timings and command rate one by one, this way you see if a channel is failing (Failed channel will show NA or - in the main timings)
    Profile DDR Voltage ................... xxxxV
    Profile QPI Voltage ................... xxxxV
    Channel Interleaving .................. [Auto]
    Rank Interleaving ..................... [Auto]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ........................... 8 [8]
    tRCD ....................................... 8 [8]
    tRP ........................................ 8 [8]
    tRAS ....................................... 24 [24]



    ##Channel A Advanced Timing Control##
    tRC ........................................ [Auto]
    tRRD ....................................... [Auto]
    tWTR ....................................... [Auto]
    tWR ........................................ [Auto]
    tWTP ....................................... [Auto]
    tWL ........................................ [Auto]
    tRFC ....................................... [Auto]
    tRTP ....................................... [Auto]
    tFAW ....................................... [Auto]
    Command Rate (CMD) ......................... [Auto] << 1T

    ##Channel A Misc Timing Control##
    B2B CAS Delay .............................. [Auto]
    Round Trip Latency ......................... [Auto]

    Advanced Voltage Control:

    CPU
    Load Line Calibration ...................... [disabled]
    CPU Vcore .......................... 1.2375V [normal] also look for dvid in bios and set to normal << Set this if you are using 166 Bclk, set 1.25-1.35
    QPI/VTT Voltage .................... 1.175V << 1.3-1.45
    CPU PLL ............................ 1.800V [auto]

    MCH/ICH
    PCIE .............................. 1.500v [auto]
    QPI PLL ........................... 1.100v [auto] << 1.2
    IOH Core ........................... 1.100v [auto] << 1.14
    ICH I/O ............................ 1.500v [auto]
    ICH Core ........................... 1.100v [auto]

    DRAM
    DRAM Voltage ....................... 1.500V [1.660V]
    DRAM Termination ................... 0.750v [AUTO]
    Ch-A Data VRef. .................... 0.750v [AUTO]
    Ch-B Data VRef. .................... 0.750v [AUTO]
    Ch-C Data VRef. .................... 0.750v [AUTO]
    Ch-A Address VRef. ................. 0.750v [AUTO]
    Ch-B Address VRef. ................. 0.750v [AUTO]
    Ch-C Address VRef. ................. 0.750v [AUTO]

  2. #132

    Default Re: GA-X58A-UD5 Rev2 problems bios FB

    Lsdmeasap, Thank you !

    Correctly :























    Last edited by NуроFеn; 12-02-2010 at 09:13 PM.

  3. #133
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X58A-UD5 Rev2 problems bios FB

    Nice, so it's working better now then right?

    You can use Load Line Level 1 if you want

  4. #134

    Default Re: GA-X58A-UD5 Rev2 problems bios FB

    Lsdmeasap, Thank you! I will test!!!
    Last edited by NуроFеn; 12-05-2010 at 07:30 PM.

Page 14 of 14 FirstFirst ... 4121314

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •