Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 5 of 14 FirstFirst ... 34567 ... LastLast
Results 41 to 50 of 134

Thread: GA-X58A-UD5 Rev2 problems bios FB




  1. #41

    Default Re: GA-X58A-UD5 Rev2 problems bios FB

    ROSESTEEL,
    SATA Port0-3 Native Mode...DISABLED
    Why did you switch off ?

  2. #42
    Join Date
    Sep 2010
    Location
    California
    Posts
    262

    Default Re: GA-X58A-UD5 Rev2 problems bios FB

    Do you need it on for mulitple boot? I didn't need it. Plus, I didn't know if it is good for Windows 7 64. I kept it disabled and I have not had any problems. But to answer your question, I disabled it just because I did not want to run in native IDE Mode. I do not have any techical reasons because I do not really know how any of this really works. Sorry. :p

    If you disable it, is your system stable?

  3. #43
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X58A-UD5 Rev2 problems bios FB

    Native mode enabled or disabled shouldn't cause you any issues either way.

    Did you get it going now?

  4. #44

    Default Re: GA-X58A-UD5 Rev2 problems bios FB

    If you disable it, is your system stable?
    Yes the system is booted with no errors.

    You could not tell the developer that the function does not work SATA Port0-3 Native Mode, I know bad language

  5. #45

    Default Re: GA-X58A-UD5 Rev2 problems bios FB

    Lsdmeasap, Why will not boot windows 7 x64 when enabled SATA Port0-3 Native Mode ?

    I'm sorry I want to know....

  6. #46
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X58A-UD5 Rev2 problems bios FB

    Not sure why?

    It is fine to use either way though, so you can leave it how you have it now = working :)

  7. #47

    Default Re: GA-X58A-UD5 Rev2 problems bios FB

    Not sure why?
    Yes.

    Do you work? SATA Port0-3 Native Mode-enabled or disabled?

  8. #48
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X58A-UD5 Rev2 problems bios FB

    Yes, I can use either enabled or disabled and can switch it anytime.

    I do install with it enabled so maybe that is why? I always have it enabled.

    I'm using Vista, but not sure that would matter?

  9. #49

    Default Re: GA-X58A-UD5 Rev2 problems bios FB

    I have a SATA Port0-3 Native Mode has been enabled in the installation OS, but if you turn off the computer OS will not boot. This is probably a bug in the new BIOS! Configure SATA Port0-3 Native Mode is needed? I'll have to worry if it does not work?

  10. #50
    Join Date
    Sep 2010
    Location
    California
    Posts
    262

    Default Re: GA-X58A-UD5 Rev2 problems bios FB

    Keep it disabled and don't worry about it, ;)

    If you want to learn more about how Native Mode will affect your system, you should go to a Windows 7 site to see if the 64 bit OS really does support it.

    This is what the manual says:

    SATA Port0-3 Native Mode
    Specifies the operating mode of the integrated SATA controllers.

    Disabled Allows the SATA controllers to operate in Legacy IDE mode.
    In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared
    with other device.
    Set this option to Disabled if you wish to install operating systems that do not support Native mode, e.g. Windows 9X/ME. (Default)

    Enabled Allows the SATA controllers to operate in Native IDE mode.
    Enable Native IDE mode if you wish to install operating systems that support
    Native mode, e.g. Windows XP/2000.

    ...
    This seems to suggest that NATIVE MODE has to do with shared IRQ. So your problem, when enabled, should be related to this.

Page 5 of 14 FirstFirst ... 34567 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •