Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: GA-X58A-UD5 and CrystalDiskInfo 3.9.2




  1. #11
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: GA-X58A-UD5 and CrystalDiskInfo 3.9.2

    SSD's will never give a temperature, because they don't contain temp sensors. The SMART ID that reports temps, ID number C2 will also be missing from all SSD's.

    An SSD will never be more than a couple of degrees above the surrounding air temp of where ever it is located, be it inside a PC case, an external enclosuer or on a test bed etc. This makes temperature sensors in SSD's pointless. In contrast, with a high ambient temp and poor ventilation, tepmerature can cause a mechanical disk to fail. I was once called to a friend's house. He had put his NAS box next to the water heater upstairs and also blocked off both vent and fan with piles of towels. Sufficed to say this was the source of his data corrupton, and the drives were litterally too hot to touch. Temp logs for a spinning HDD are very important. For a SSD they are pointless, thus not included.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  2. #12

    Default Re: GA-X58A-UD5 and CrystalDiskInfo 3.9.2

    Psycho101, This is not SSD WDC WD5000AAKS-60Z1A0 :) HDD emperature sensor should work. The program of it's possible does not support the hard drive (((((((

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X58A-UD5 and CrystalDiskInfo 3.9.2

    Ya, HDD health shows the temps, and other apps do not, so it's just those apps have not added support for that disk yet is all.

  4. #14
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: GA-X58A-UD5 and CrystalDiskInfo 3.9.2

    I wasnkt commenting on your post Nypofen, I was responding to faust1200. I'm assuming his crucial disks are SSD's.

    Your WD drive doesn't show the temp in Crystal probably because of a software bug. It would be worth reporting it to the author.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •