Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: GA-X58A-UD3R DRAM Recovery failed.




  1. #1
    Join Date
    Nov 2010
    Location
    greece
    Posts
    2

    Default GA-X58A-UD3R DRAM Recovery failed.

    Greetings there and hi to all im new to this forum.

    Im not a master of making configurations to pc but i wanted to post here cause i've found it the only place i could get some help.

    My new Pc

    CPU:Intel Core I7-950 (s1366, 3.06GHz, 8MB, Box)
    Motherboard: Gigabyte GA-X58A-UD3R (s1366, DDR3, X58)
    Ram: Corsair Dominator GT 12GB DDR3-2000 Ram Kit, Airflow II Fan (CMT12GX3M3A2000C9)
    Graphics Card:Gigabyte GTX 480
    Case : Cooler master HAF 922
    Power supply:Cooler master silent pro gold 800w.

    Problem:

    I start the pc and i get to boot screen after that the pc starting loading windows normaly when i get to the step Veryfying DMI pool data... this one seems to be ok and after that i get DRAM recovery Failed... and the computer shuts down and starts again alone without me starting it. It is doing this 3-4 times and after that it is going to windows normally.
    Second problem i noticed that ram runs at 1066 on default and when i change to profile1 the frequency going at 2066(i think this is the frequency that my ram supposed
    to run) the pc doing restarts all the time no boot screen no nothink.

    Someone can give an advice to me please.

    No overcloaks i did just stock everythink i posted as build.

    Kindest regars.

  2. #2
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: GA-X58A-UD3R DRAM Recovery failed.

    with 12gb it will be very hard to run at 2066mhz,it will need a huge amount of qpi/vtt voltage and will run hot,i would aim for 1600mhz speed with 12gb,you have to raise the system multiplier spd to alter ram speed by 8x,10x,12x,ect,set dram voltage to 1.66 in the bios or according to your ram and set qpi/vtt voltage to 1.35000v to start with but may need alot more
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  3. #3
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: GA-X58A-UD3R DRAM Recovery failed.

    Try what is stated above. Dont use XMP profile you wont get 12gb ram stable at 2000 mhz. If you still getting Dram recovery failed. You might also have a bend pin in cpu socket. Remove cpu and take few pics of the socket and post here. Try reassembling and reaply your heat sink make sure not to "Over Tighten" it as this can cause problems also.

    Its a 50/50 shot of incorrect settings or bent pins.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  4. #4
    Join Date
    Nov 2010
    Location
    greece
    Posts
    2

    Default Re: GA-X58A-UD3R DRAM Recovery failed.

    Do u recomend to update my bios from f6 to f7f beta? Ok guys and thnx for fast replies.When i will go home after work ill try do all this u said and ill post back.
    Thanks in advance.

  5. #5
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: GA-X58A-UD3R DRAM Recovery failed.

    it is always recommended here to use the latest bios. So yes update to F7f if thats the latest one.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •