Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 5 of 5 FirstFirst ... 345
Results 41 to 47 of 47

Thread: I need help with making my newly built PC stable




  1. #41
    Join Date
    Nov 2010
    Location
    Australia
    Posts
    27

    Default Re: I need help with making my newly built PC stable

    Yep will do all that tonight, thanks for the ideas, need as much as i can get

  2. #42
    Join Date
    Nov 2010
    Location
    Australia
    Posts
    27

    Default Re: I need help with making my newly built PC stable

    ok so here is what i have set everything to :

    Advanced CPU Features:
    CPU Clock Ratio ................................ [23x] (3.06GHz)
    Intel(R) Turbo Boost Tech .................. [Enable]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disable]
    C3/C6/C7 State Support .................... [Enable]
    CPU Thermal Monitor ......................... [Auto]
    CPU EIST Function ............................ [Auto]
    Virtualization Technology ................... [Disabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Auto]


    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... x20 (Always 2x memory Multi or 2x +1)
    Isonchronous Frequency ..................[Enabled] (Can only find Isonchronous Support = Enabled) *********


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Disabled]
    BCLK Frequency (MHz) .....................133MHz
    PCI Express Frequency (MHz) ........... [Auto]

    C.I.A.2 [Disabled] ***************

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [10x] 1333MHz
    DRAM Timing Selectable (SPD) .......... [Auto]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................[9]
    tRCD ..................................[9]
    tRP ...................................[9]
    tRAS ..................................[24]

    Below values may be left in Auto if you like, generally this is fine. For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread

    ##Channel A Advanced Timing Control##
    tRC ........................................[33] (Should be = tRAS + tRP or above for stability)
    tRRD .......................................[4]
    tWTR .......................................[12] (Must be Write to Read Delay/Same Rank - (tWL + 4)
    tWR ........................................[8]
    tWTP .......................................[20] (tWTP Must = tWR + tWL + 4)
    tWL ........................................[8] (tWL Must be CAS Latency -1)
    tRFC .......................................[60]
    tRTP .......................................[4]
    tFAW .......................................[20]
    Command Rate (CMD) ................[2]

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................[58]

    B2B CAS Delay ........................[-]


    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Auto]
    CPU Vcore ...............................[1.26875v] ** CHANGING TO AUTO OR NORMAL DIDN'T CHANGE VOLTAGE **
    QPI/VTT Voltage 1.150v ............[1.315v]
    CPU PLL 1.800v .......................[1.800v]

    MCH/ICH
    PCIE 1.500v ...........................[1.500v]
    QPI PLL 1.100v .......................[1.100v]
    IOH Core 1.100v .....................[1.100v]
    ICH I/O 1.500v .......................[1.500v]
    ICH Core 1.1v ........................[1.100v]

    DRAM
    DRAM Voltage 1.500v ..............[1.500v]
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO

  3. #43
    Join Date
    Nov 2010
    Location
    Australia
    Posts
    27

    Default Re: I need help with making my newly built PC stable

    I am going to buy some high spec cooling equipment before i run any high end burn tests, one extra thing though, it not isn't booting past windows 7 splash screen, after awile it finaly does (5 times or so) and then will not shutdown. Any idea what could be causing it?

  4. #44
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: I need help with making my newly built PC stable

    try with qpi/vtt voltage at 1.32000v or round about that
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  5. #45
    Join Date
    Nov 2010
    Location
    Australia
    Posts
    27

    Default Re: I need help with making my newly built PC stable

    Do you think that has anything to do with it not booting or should i be checking other things?

  6. #46
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: I need help with making my newly built PC stable

    it could be that,set cpu voltage on normal even if it gives the same voltage,you could try inserting the windows dvd and boot from cd and do a start up repair,esp if its blue screened badly it will corrupt the start up
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  7. #47
    Join Date
    Nov 2010
    Location
    Australia
    Posts
    27

    Default Re: I need help with making my newly built PC stable

    Yep have changed to cpu voltage to normal already and will up qpi to 1.3200v and try repair tonight

Page 5 of 5 FirstFirst ... 345

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •