Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: UD9 raid0/can't find 1TB HDD




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: UD9 raid0/can't find 1TB HDD

    You may also need to initialize the drive first from Disk Management, be sure you check there to see if the drive is visible as well and it will tell you to initialize as soon as you open it - if the drive is working.

    You should be able to RMA that other drive, drives normally do not need registered they are just RMA warranted based on the serial #

    You can check the warranty left on the drive and setup a RMA from here with the serial #
    http://support.wdc.com/warranty/index_end.asp?lang=en
    Last edited by Lsdmeasap; 07-05-2011 at 09:42 AM.

  2. #12
    Join Date
    Oct 2009
    Location
    Sand Springs,Ok.
    Posts
    172

    Default Re: UD9 raid0/can't find 1TB HDD

    What are the chances of 2 HDD - bought at different times - being bad ??? Bummer. Here is a pic where I initialized the 1TB 3.0 on my EP45-UD3P/E8600 RIG.(This is actually a current pic of my UD9 but is the same as where I initialized my UD3P Rig) Notice it doesn't say initialize anywhere - but it did on my UD3P Rig.



    Here's another pic inside windows - it doesn't show my 1 TB 6.0 - just my Raptors in raid 0 and my optic drive:



    I'm just trying to use the 1 TB 6.0 for my files etc. I'm getting to much BS on my Raptors. Man, I was hoping it might be some settings in my BIOS or something simple. Does anyone have anymore suggestions ? If not I guess I'll try to RMA both HDD's. Thanks wibujo
    THRASHER: Liquid Cooled
    Cooler Master XB EVO<>G1 Sniper 5 v1.0 F10<>4770k vid 1.022<>Batch#3332B365
    OC 4.4GHz 1.25v<>G.Skill F3-2400C10Q-32GTX 10-12-12-31 1.65v 2400MHz 32GB's
    2/Gigabyte R9 290X CrossFireX<>Corsair AX1200I<>2/Samsung 840 Pro 256GB raid0
    Windows 7 Ultimate<>idle 28c


  3. #13
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: UD9 raid0/can't find 1TB HDD

    Have you gone into the intel raid rom pressing "Ctrl" + "I"? does it show both drives?

    Let me clear this up. You are trying to use 1 WD 1tb 3gb/s sata2 drive and 1 WD 1tb 6gb/s sata3 drive in raid 0?

    That might be your problem sata2 drive and sata3 drive might not work together.

    First though if the Intel raid rom utility at boot before windows does not show both drives, windows wont see both drives.

    Try connecting 1 drive and making sure the raid array is removed from it then remove that drive and install second drive and remove that array from it. Then try both drives again.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  4. #14
    Join Date
    Oct 2009
    Location
    Sand Springs,Ok.
    Posts
    172

    Default Re: UD9 raid0/can't find 1TB HDD

    Intel raid rom shows my raptors (2X600GB 6.0gb) in raid 0 as well as the the 1 TB 6.0gb. I have tested with my UD9 with my 600GB 6.0gb raptors in raid 0 with the 1TB 3.0gb out of my UD3P Rig and had no problems running them. When I'd click on computer - it would show Raptors as local disk C - the 1TB 3.0gb would show as local disk D - BD-RE Drive as E. I have the raptors in sata2 port 0 and port 1. I have 1TB in sata2 port 2. I have optic drive in sata2 port 5. I usually use the 1TB to back up everything in case I have problems with the raptors. Raptors have been bullet proof so far in both my Rigs. I didn't want to break my raid array because I'd loose everything. That would be the last resort. What do you think I should do now ??? Thanks wibujo
    THRASHER: Liquid Cooled
    Cooler Master XB EVO<>G1 Sniper 5 v1.0 F10<>4770k vid 1.022<>Batch#3332B365
    OC 4.4GHz 1.25v<>G.Skill F3-2400C10Q-32GTX 10-12-12-31 1.65v 2400MHz 32GB's
    2/Gigabyte R9 290X CrossFireX<>Corsair AX1200I<>2/Samsung 840 Pro 256GB raid0
    Windows 7 Ultimate<>idle 28c


  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: UD9 raid0/can't find 1TB HDD

    Very odd! Can you test that 1TB drive on another computer again to be sure it's working?

    I was thinking maybe you needed a updated BIOS with modified new Intel ROM in it possibly, but since you can see the drive in the Intel ROM already I doubt that would help.

    If you want to try that though, you could test with one of the modified BIOSes for UD9 I've already made. Or are you already using one, I think I made one for you not long ago?

    If it wasn't you, or you want a new one, let me know and I'll make one for you or show you were the others I've already made are linked.

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •