Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: Gigabyte X58A-UD5 Rev.1.0 Patriot Viper 3X2 gb PVT36G1600LLK + 3x1 gb PVT33G1600LLK




  1. #1
    Join Date
    Nov 2010
    Location
    Turkey
    Posts
    1

    Default Gigabyte X58A-UD5 Rev.1.0 Patriot Viper 3X2 gb PVT36G1600LLK + 3x1 gb PVT33G1600LLK

    I was using Patriot Viper Series 3X2 gb PVT36G1600LLK on my Gigabyte X58A-UD5 Rev. 1.0 mobo,I bought and installed 3x1 gb PVT33G1600LLK to the remaining ram slots but system doesn't boot,it stucks after recognizing the total ram amount.After several boot tries,the bios shows a warning to reset the bclck to 133 which is I'm using as default without any overclock,and the ram frequency to 1066 mhz with 7-7-7-20 timings.Finally the system boots and opens the windows.
    So I couldn't use the ram kits with all of the slots full at 1600 mhz 8-8-8-24 timings...

    Is there any recommendations to give me about the situation?
    Last edited by incognito; 11-28-2010 at 11:56 PM.

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Gigabyte X58A-UD5 Rev.1.0 Patriot Viper 3X2 gb PVT36G1600LLK + 3x1 gb PVT33G1600L

    Have you made any other changes in BIOS?
    Please post your full settings using the temlate in this post.

  3. #3
    Join Date
    May 2010
    Location
    USA
    Posts
    150

    Default Re: Gigabyte X58A-UD5 Rev.1.0 Patriot Viper 3X2 gb PVT36G1600LLK + 3x1 gb PVT33G1600L

    Quote Originally Posted by incognito View Post
    I was using Patriot Viper Series 3X2 gb PVT36G1600LLK on my Gigabyte X58A-UD5 Rev. 1.0 mobo,I bought and installed 3x1 gb PVT33G1600LLK to the remaining ram slots but system doesn't boot,it stucks after recognizing the total ram amount.After several boot tries,the bios shows a warning to reset the bclck to 133 which is I'm using as default without any overclock,and the ram frequency to 1066 mhz with 7-7-7-20 timings.Finally the system boots and opens the windows.
    So I couldn't use the ram kits with all of the slots full at 1600 mhz 8-8-8-24 timings...

    Is there any recommendations to give me about the situation?
    Sounds like you're using two different RAM densities??? - 2GB & 1GB modules. That might be causing a problem. Is there a reason you need to do it this way?

    My opinion is that the issues (such as those you're experiencing) with that setup far out weigh the performance differences between 6 and 9gig... which would be very minimal. I would just go with 6gig, or if I wanted more then 6, find another matching 6gig kit and go up to 12gig.

    In short I wouldn't mix different densities.

    Other then that, you'll need to manually set your memory settings to the lowest settings of the two kits. i.e if the 1gig kits are 8-8-8, and the 2gig kits are 7-7-7, you'll need to run at 8-8-8, because running at 7-7-7 is going to stress the 1gig kits.

    My two cents.
    - My System Specs -
    GA-X58A-UD5 MB (F6 bios)
    Core i7-950 @ 3.8GHz Processor
    Noctua NH-C12P SE14 CPU Cooler
    6 gig Corsair Dominator - TR3X6G1600C8D
    ATI Radeon HD6950 2Gig Video Card
    Creative X-Fi Titanium Pro Souncard
    Antec Signature SG-850 PS
    Cooler Master HAF X
    Win7 Ult x64

  4. #4
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Gigabyte X58A-UD5 Rev.1.0 Patriot Viper 3X2 gb PVT36G1600LLK + 3x1 gb PVT33G1600L

    set ram timings manually 8-8-8-24 and speed to 1600mhz,are both types of ram rated at 1.65v? if so set dram to 1.66 in the bios,then set qpi/vtt to atleast 1.35v and then try booting into windows,
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •