Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 28

Thread: UD7, can't flash to F7 or F8




  1. #1
    Join Date
    Apr 2010
    Location
    Montreal
    Posts
    26

    Default UD7, can't flash to F7 or F8

    First I have to say, I use the guide from the sticky section with usb stick for the flashing.

    When I try and flash from F6 to F7 all hell breaks loose, within a few minutes Kaspersky is the first victim, showing corruped data, not being able to update, if I try to do a scan, I get the BSOD then I get all kinds of applicationEXE popups (werfault.exe, wermgr.exe etc), my CCC goes crazy (host application as stopped working...), the internet connection fails and ALL kinds of weird stuff like the desktop looking like the XP desktop etc, etc

    I get the same thing in safe mode.

    When F8 came out I tried that one with almost the same result except it went crazy on the second day instead of a few minutes.

    On F6 I have no problems except for one minor hick, when I boot, half the time It will post 4 gig of memory, so I reboot immediatly and then I get my 6 gigs, If I wait too long to reboot when on 4 gigs (like when the wife turns the computer on), I will have to reboot twice to get my 6 gigs. I tried reseating the sticks, no luck.
    Apart from that F6 is stable.

    This was my first built and was very nervous because I'm far from being an expert , so hopefully it's something not set properly or something like that.

    By the way the flashing goes very well.




    UD7
    i7 930
    OCZ (OCZ3P1333LV6G)
    OCZ Vertex 60 gig
    WD black 1T
    1200 Quattro
    5850 xfire
    Prolimatech Megahalem
    HAF932

  2. #2
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: UD7, can't flash to F7 or F8

    what revision is the mb? its either due to memory/bios setting not right or your ssd,try latest beta

    http://download.gigabyte.us/FileList...8a-ud7_f8e.exe rev1

    http://download.gigabyte.us/FileList..._v.2.0_fc6.exe rev2
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  3. #3
    Join Date
    Apr 2010
    Location
    Montreal
    Posts
    26

    Default Re: UD7, can't flash to F7 or F8

    rev1

  4. #4
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: UD7, can't flash to F7 or F8

    you want the f8e above
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  5. #5
    Join Date
    Apr 2010
    Location
    Montreal
    Posts
    26

    Default Re: UD7, can't flash to F7 or F8

    ok, i'll try f8e and give an update, f8 was stable for about 2 days, so we'll see.

  6. #6
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: UD7, can't flash to F7 or F8

    you probably need to tweak bios settings from bios to bios versions,esp the ram and qpi/vtt,post your current dram and qpi/vtt voltages
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  7. #7
    Join Date
    Apr 2010
    Location
    Montreal
    Posts
    26

    Default Re: UD7, can't flash to F7 or F8

    Thanks wazza, I'll be doing this tomorrow and give you the info.

    I really need someone with knowledge because I don't know enough.

  8. #8
    Join Date
    Apr 2010
    Location
    Montreal
    Posts
    26

    Default Re: UD7, can't flash to F7 or F8

    Ok, so I flashed f8e and here's a template I found with my info, as I said I'm not too good with this, let me know if you need more info.
    My memory is 7-7-7-20, but it's set at 7-7-7-16 in the bios ???




    Advanced CPU Features:
    CPU Clock Ratio ................................ [21x]
    Intel(R) Turbo Boost Tech ...................... [AUTO]
    CPU Cores Enabled .............................. [All]
    CPU Multi Threading .............................[ENABLED]
    CPU Enhanced Halt (C1E) ........................ [AUTO]
    C3/C6/C7 State Support ......................... [DISABLED]
    CPU Thermal Monitor ............................ [AUTO]
    CPU EIST Function .............................. [AUTO]
    Virtualization Technology ...................... []
    Bi-Directional PROCHOT ......................... [AUTO]

    Uncore & QPI Features:
    QPI Link Speed ..............................[4.8]
    Uncore Frequency ............................[2133]
    Isonchronous Frequency ......................[]

    Standard Clock Control:
    Base Clock (BCLK) Control .......................... [DISABLED]
    BCLK Frequency (MHz) ................................[133]
    PCI Express Frequency (MHz) ........................ [AUTO]
    C.I.A.2........................................... .. []

    Advanced Clock Control:
    CPU Clock Drive ............................[800]
    PCI Express Clock Drive ....................[900]
    CPU Clock Skew .............................[0PS]
    IOH Clock Skew .............................[0PS]

    Advanced DRAM Features:
    Performance Enhance ...................... [TURBO]
    Extreme Memory Profile (X.M.P) ........... [N/A]
    System Memory Multiplier (SPD) ........... [AUTO]
    DRAM Timing Selectable (SPD) ............. [AUTO]

    Memory Frequency.......................... [1066]
    Vcore..................................... [1.232v]
    DRAM voltage.............................. [1.520v]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................[7] - twtp.....................................[19]
    tRCD ..................................[7] - twl......................................[7]
    tRP ...................................[7] - trfc.....................................[60]
    tRAS ..................................[16] - trtp.....................................[4]
    trc....................................[27] - tfaw.....................................[16]
    trrd...................................[4] - command rate (CMD).......................[1]
    twtr...................................[4] - B2B......................................[-]
    twr....................................[8] - round trip latency.......................A [47] B [49] C [49]




    Advanced Voltage Control:
    CPU Intel Core i7 920 D0 Stepping
    Load Line Calibration .................[AUTO]
    CPU Vcore 1.26250v....................[AUTO]
    QPI/VTT Voltage 1.175v ................[AUTO]
    CPU PLL 1.800v ........................[AUTO]
    PCIE 1.500v ...........................[AUTO]
    QPI PLL 1.100v ........................[AUTO]
    IOH Core 1.100v .......................[AUTO]
    ICH I/O 1.500v ........................[AUTO]
    ICH Core 1.1v .........................[AUTO]

    DRAM
    DRAM Voltage 1.500v ..............[AUTO]
    DRAM Termination 0.750v.......... [AUTO]
    Ch-A Data VRef. 0.750v ...........[AUTO]
    Ch-B Data VRef. 0.750v ...........[AUTO]
    Ch-C Data VRef. 0.750v ...........[AUTO]
    Ch-A Address VRef. 0.750v ........[AUTO]
    Ch-B Address VRef. 0.750v ........[AUTO]
    Ch-C Address VRef. 0.750v ........[AUTO]
    Last edited by dan0; 11-30-2010 at 05:11 AM.

  9. #9
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: UD7, can't flash to F7 or F8

    Advanced CPU Features:
    CPU Clock Ratio ................................ [21x]
    Intel(R) Turbo Boost Tech ...................... [AUTO]enabled
    CPU Cores Enabled .............................. [All]
    CPU Multi Threading .............................[ENABLED]
    CPU Enhanced Halt (C1E) ........................ [AUTO] disabled(use balanced profile in Control Panel\System and Security\Power Options
    C3/C6/C7 State Support ......................... [DISABLED] enabled
    CPU Thermal Monitor ............................ [AUTO]
    CPU EIST Function .............................. [AUTO] enabled
    Virtualization Technology ...................... []
    Bi-Directional PROCHOT ......................... [AUTO]

    Uncore & QPI Features:
    QPI Link Speed ..............................[4.8] 36x
    Uncore Frequency ............................[2133] set to 21x
    Isonchronous Frequency ......................[]

    Standard Clock Control:
    Base Clock (BCLK) Control .......................... [DISABLED]
    BCLK Frequency (MHz) ................................[133]
    PCI Express Frequency (MHz) ........................ [AUTO]
    C.I.A.2........................................... .. []

    Advanced Clock Control:
    CPU Clock Drive ............................[800]
    PCI Express Clock Drive ....................[900]
    CPU Clock Skew .............................[0PS]
    IOH Clock Skew .............................[0PS]

    Advanced DRAM Features:
    Performance Enhance ...................... [TURBO]
    Extreme Memory Profile (X.M.P) ........... [N/A]
    System Memory Multiplier (SPD) ........... [AUTO] manual set to give 1330mhz ram probably 10x
    DRAM Timing Selectable (SPD) ............. [AUTO] manual then quick timings and type into the top 4 slots
    7
    7
    7
    20
    command rate 1T
    Memory Frequency.......................... [1066] 1330mhz
    Vcore..................................... [1.232v] normal
    DRAM voltage.............................. [1.520v] 1.5v or according to ram might be 1.66v

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................[7] - twtp.....................................[19]
    tRCD ..................................[7] - twl......................................[7]
    tRP ...................................[7] - trfc.....................................[60]
    tRAS ..................................[16] - trtp.....................................[4]
    trc....................................[27] - tfaw.....................................[16]
    trrd...................................[4] - command rate (CMD).......................[1]
    twtr...................................[4] - B2B......................................[-]
    twr....................................[8] - round trip latency.......................A [47] B [49] C [49]




    Advanced Voltage Control:
    CPU Intel Core i7 920 D0 Stepping
    Load Line Calibration .................[AUTO]
    CPU Vcore 1.26250v....................[AUTO] set to normal
    QPI/VTT Voltage 1.175v ................[AUTO] set to 1.31500v
    CPU PLL 1.800v ........................[AUTO]
    PCIE 1.500v ...........................[AUTO]
    QPI PLL 1.100v ........................[AUTO]
    IOH Core 1.100v .......................[AUTO]
    ICH I/O 1.500v ........................[AUTO]
    ICH Core 1.1v .........................[AUTO]

    DRAM
    DRAM Voltage 1.500v ..............[AUTO] set to 1.5v or according to ram or 1.66v
    DRAM Termination 0.750v.......... [AUTO]
    Ch-A Data VRef. 0.750v ...........[AUTO]
    Ch-B Data VRef. 0.750v ...........[AUTO]
    Ch-C Data VRef. 0.750v ...........[AUTO]
    Ch-A Address VRef. 0.750v ........[AUTO]
    Ch-B Address VRef. 0.750v ........[AUTO]
    Ch-C Address VRef. 0.750v ........[AUTO]
    Last edited by wazza300; 11-30-2010 at 05:46 AM.
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  10. #10
    Join Date
    Apr 2010
    Location
    Montreal
    Posts
    26

    Default Re: UD7, can't flash to F7 or F8

    ok, will try those and give updates.

    Is it normal the Round trip latency is not the same for all 3 channels ???

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •