Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Long resume from standby on GA-P55A-UD3




  1. #11
    Join Date
    Dec 2010
    Location
    East Elmhurst, New York, United States
    Posts
    9

    Default Re: Long resume from standby on GA-P55A-UD3

    I will test with the tools you recommended.

    Where did you see the ram is rated 1.5-1.65? On gskill site all I see is 1.5v, but I'll try it as it doesn't sound too outrageous.
    Motherboard GIGABYTE GA-P55A-UD3 LGA 1156 Intel P55 SATA 6Gb/s USB 3.0 ATX Intel Motherboard Revision 2.0 (Bios F11)
    CPU Intel Core i5-760 Lynnfield 2.8GHz LGA 1156 95W Quad-Core Desktop Processor BX80605I5760
    RAM G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin 1.5v DDR3 SDRAM DDR3 1600 F3-12800CL9D-4GBRL
    Video ASUS ENGTX460 DirectCU TOP/2DI/768MD5 GeForce GTX 460 (Fermi) 768MB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support
    HDD 1x1000GB Seagate Barracuda 7200.10 ST3320620AS
    HDD - BACKUP 1x1000GB Seagate Barracuda 7200.11 ST3500330AS
    Power Supply Corsair VX550W
    Case Antec P183


  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Long resume from standby on GA-P55A-UD3

    Sorry, I don't remember. I just googled the model and looked at a few sites selling it.

    Does the SPD only show 1.5 in CPU-z? Not that it matters, just wondered

  3. #13
    Join Date
    Dec 2010
    Location
    East Elmhurst, New York, United States
    Posts
    9

    Default Re: Long resume from standby on GA-P55A-UD3

    Yea the RAM shows 1.5v in SPD, but I tried it at 1.6v with QPI at 1.25v and no difference.

    I ran the Intel Burn Test and while the temperatures were high, it was able to pass it.

    I did notice something though. If I disable the USB 3.0 controller in the bios, I am not able to resume from standby at all.
    Motherboard GIGABYTE GA-P55A-UD3 LGA 1156 Intel P55 SATA 6Gb/s USB 3.0 ATX Intel Motherboard Revision 2.0 (Bios F11)
    CPU Intel Core i5-760 Lynnfield 2.8GHz LGA 1156 95W Quad-Core Desktop Processor BX80605I5760
    RAM G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin 1.5v DDR3 SDRAM DDR3 1600 F3-12800CL9D-4GBRL
    Video ASUS ENGTX460 DirectCU TOP/2DI/768MD5 GeForce GTX 460 (Fermi) 768MB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support
    HDD 1x1000GB Seagate Barracuda 7200.10 ST3320620AS
    HDD - BACKUP 1x1000GB Seagate Barracuda 7200.11 ST3500330AS
    Power Supply Corsair VX550W
    Case Antec P183


  4. #14
    Join Date
    Dec 2010
    Location
    East Elmhurst, New York, United States
    Posts
    9

    Default Re: Long resume from standby on GA-P55A-UD3

    Guys,

    I believe I found the problem. I have to narrow it down exactly but it's something to do with the SATA port that you're plugged into.

    I had my old configuration with SATA0 Master - Backup, SATA2 Master - CD, SATA2 Slave - Main drive ( I believe ).

    After reinstalling win7 on the Master drive and seeing that it works fine resuming from standby within 2sec, I moved the Main drive from SATA2 slave to sata0 master. All is good now.

    I was not paying attention when I connected my SATA, especially because I didn't think it would make any difference whatsoever.

    I will go back to my backup and find out exactly what combination causes the problem so we can have it addressed by Gigabyte.

    In any case thank to all for helping out.
    -Paul
    Motherboard GIGABYTE GA-P55A-UD3 LGA 1156 Intel P55 SATA 6Gb/s USB 3.0 ATX Intel Motherboard Revision 2.0 (Bios F11)
    CPU Intel Core i5-760 Lynnfield 2.8GHz LGA 1156 95W Quad-Core Desktop Processor BX80605I5760
    RAM G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin 1.5v DDR3 SDRAM DDR3 1600 F3-12800CL9D-4GBRL
    Video ASUS ENGTX460 DirectCU TOP/2DI/768MD5 GeForce GTX 460 (Fermi) 768MB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support
    HDD 1x1000GB Seagate Barracuda 7200.10 ST3320620AS
    HDD - BACKUP 1x1000GB Seagate Barracuda 7200.11 ST3500330AS
    Power Supply Corsair VX550W
    Case Antec P183


  5. #15
    Join Date
    Dec 2010
    Location
    East Elmhurst, New York, United States
    Posts
    9

    Default Re: Long resume from standby on GA-P55A-UD3

    Confirmed with my backup drive.
    If I plug it in SATA2_2, it takes a long time to resume from standby.
    When it's plugged into SATA2_0, it's 1 second or so resume.

    I will inform Gigabyte of my findings as well.
    Motherboard GIGABYTE GA-P55A-UD3 LGA 1156 Intel P55 SATA 6Gb/s USB 3.0 ATX Intel Motherboard Revision 2.0 (Bios F11)
    CPU Intel Core i5-760 Lynnfield 2.8GHz LGA 1156 95W Quad-Core Desktop Processor BX80605I5760
    RAM G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin 1.5v DDR3 SDRAM DDR3 1600 F3-12800CL9D-4GBRL
    Video ASUS ENGTX460 DirectCU TOP/2DI/768MD5 GeForce GTX 460 (Fermi) 768MB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support
    HDD 1x1000GB Seagate Barracuda 7200.10 ST3320620AS
    HDD - BACKUP 1x1000GB Seagate Barracuda 7200.11 ST3500330AS
    Power Supply Corsair VX550W
    Case Antec P183


  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Long resume from standby on GA-P55A-UD3

    Nice to see you found the cause, I didn't even think to ask since you are not having any disk/cd related issues directly.

    OS should always be plugged into SATAII_0 for sure

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •