Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 9 of 10 FirstFirst ... 78910 LastLast
Results 81 to 90 of 96

Thread: Need Help Overclocking UD9 / 980x, LAN not working, but detected.




  1. #81
    Join Date
    Jun 2010
    Location
    Phoenix, Arizona, United States
    Posts
    120

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    My Score. 4 ghz overclock. vcore at 1.337, Physx setting on GPU manually.

    Copying Judge's settings which was Performance at 1280 x 1024.

    ---------------------------Test 1--------------------------------------

    3D Mark Score: P24127

    CPU: 78212

    GPU: 19607

    GPU Test 1: 60.62 FPS
    GPU Test 2: 54.13 FPS

    CPU Test 1: 5199.24 Plans/s
    CPU Test 2: 244.87 Steps/s

    Feature Test 1: 40.18 Gtexels/s
    Feature Test 2: 8.72 Gpixels/s
    Feature Test 3: 50.55 FPS
    Feature Test 4: 58.69 FPS
    Feature Test 5: 111.39 FPS
    Feature Test 6: 96.92 FPS

    Wow not bad.

    ---------------------------Test 2--------------------------------------

    Here is the score with Physx set to Auto. Slightly Different. Not sure whether to be manual on GPU or just Auto.

    3D Mark Score: P24253

    GPU Score: 19730

    CPU Score: 77686

    ---------------------------Test 3--------------------------------------

    With me dropping my vcore from 1.337 to 1.325 I saw a performance increase!!! Wow.

    New Score with 1.325 vcore, which this is the vcore which I tested 30 hours with Linx and Prime 95.

    3D Mark Score: P24184

    GPU Score: 19643

    CPU Score: 78912

    ---------------------------Test 4--------------------------------------

    With resolution of 1920 x 1080p and Extreme Settings I get a lower GPU score, no 3D mark score...probably because this is a custom setting.

    3D Mark Score: 0 ?

    GPU Score: 12105

    CPU Score: 78382

    Going to need two GTX 480 in SLI to get a decent score. Bah! Also a monitor that supports 1920 x 1200 resolution to run the Extreme setting.
    Last edited by Gangifilms; 02-08-2011 at 03:46 PM.

  2. #82
    Join Date
    Jun 2010
    Location
    Phoenix, Arizona, United States
    Posts
    120

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    Thank you everyone for your help, I think that's it for me. Hard drives working great, configured my SSD all nicely. My WD600gb Sata 6gb/s velociraptor is making a very annoying noise when writing, it's not the click of death but maybe I am not use to 10,000 RPM drives...Probably will sell it on Ebay.

    Fans working...Mobo is working...Nice 4 GHZ clock, 12GB ram at 1600mhz 8-8-8-24 stable, temps look good, System very stable on Prime 95, Linx, Memtest, Crystal Disk HD detects good read and writes from all HD's. Sound card Asus Xonar STX is working like a charm, same with my GTX 480. Can't wait to play Dead Space 2.

    Looks good guys. Thank you so much, I have learned a lot... In 2 years I will tackle my first water cooling rig, hopefully I can find someone local in Phoenix, Arizona to teach me in person!
    Last edited by Gangifilms; 02-08-2011 at 03:44 PM.

  3. #83
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    Looking good man!

    I think those WD's are always loud, I've never heard one though so I can't describe the noise myself but I do know I hear people mention it often so I bet it's normal.

  4. #84

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    looks good glad to hear it was a old version of vanage that was problem didnt think of that
    Intel Core i7-980X Extreme Edition Gulftown cooled By Swiftech APOGEE GTZ CPU waterblock
    Gigabyte GA-X58A-UD9 Water Cooled
    Corsair Dominator 12GB (6 x 2GB) Model CMD12GX3M6A1600C8
    2 Gigabyte GTX 480 in SLI
    6 Western Digital VelociRaptor WD1500HLFS 150GB 10000 RPM in Raid 0
    2 Plextor sata Blu_ray Drives Model PX-B320SA
    Ultra X4 1200 Watt
    Thermaltake Armor+Thermaltake Bigwater 760 IS
    Creative Sound Blaster X-Fi Titanium Fatal1ty Champion
    Creative Gigaworks 750S 7.1 Suround 700 watt
    Windows 7 Ultimate 64 bit

  5. #85
    Join Date
    Jun 2010
    Location
    Phoenix, Arizona, United States
    Posts
    120

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    Think you guys can help me on my sound card issue?


    I posted this on HeadFi.com


    My Xonar Essence STX is dropping in and out every 3 minutes. Big issue!!! - Head-Fi.org Community





    -----------------



    Hello,

    My computer specs are listed at the bottom of this post.

    Audio Connection: Audio Engine 5 > Xonar Essence STX via Mono 1/8 to Stereo cables

    So I have built my new computer and the audio sounds perfect. Nice and crisp but every 3 minutes the audio will go silent. Then I wait 3 minutes...then it will start back up again for 3 minutes then go silent again.

    I have re-installed my drivers, no go. I have plenty of power supply to the card, the sound is still be registered under the Xonar and Windows 7 as if something is playing but no audio coming from the speakers.

    Speakers are not the issue, plugged the Audioengine into my ipod and played them for 5 hours.

    The only thing I am thinking of right now is that:

    1. Card is overheating / faulty card.

    2. Not enough voltage to the PCI bus???

    3. I have been overclocking so perhaps I need to bring more juice to the card.


    What do you think could be the issue???

    Thanks!

  6. #86
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    No sound from any source or certain player?
    Not even from mic or aux?

  7. #87

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    did you disable on board sond and uninstalll onboard driver before installing Xonar

    GA-X58A-UD9

    Azalia Codec [disable]
    Intel Core i7-980X Extreme Edition Gulftown cooled By Swiftech APOGEE GTZ CPU waterblock
    Gigabyte GA-X58A-UD9 Water Cooled
    Corsair Dominator 12GB (6 x 2GB) Model CMD12GX3M6A1600C8
    2 Gigabyte GTX 480 in SLI
    6 Western Digital VelociRaptor WD1500HLFS 150GB 10000 RPM in Raid 0
    2 Plextor sata Blu_ray Drives Model PX-B320SA
    Ultra X4 1200 Watt
    Thermaltake Armor+Thermaltake Bigwater 760 IS
    Creative Sound Blaster X-Fi Titanium Fatal1ty Champion
    Creative Gigaworks 750S 7.1 Suround 700 watt
    Windows 7 Ultimate 64 bit

  8. #88
    Join Date
    Jun 2010
    Location
    Phoenix, Arizona, United States
    Posts
    120

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    Sound is working good now.

    As for my registry files...Do you guys help out with Hijack This logs? Just want to make sure no unwanted stuff is on my computer.

  9. #89
    Join Date
    Jun 2010
    Location
    Phoenix, Arizona, United States
    Posts
    120

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    Also I would like to mention something from another forum post similar to mine.

    My raid boots up normally and has been working fine. However on the BIOS startup it will ask AHCI BIOS not installed.

    Same problem happened here with no real fix:

    http://forums.tweaktown.com/gigabyte...stalled-2.html

  10. #90

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    mine boots up and says AHCI is installed.

    if you install windows on that raid with AHCI turn on it windows will install AHCI as windows is install
    raid must also be the boot drive
    Intel Core i7-980X Extreme Edition Gulftown cooled By Swiftech APOGEE GTZ CPU waterblock
    Gigabyte GA-X58A-UD9 Water Cooled
    Corsair Dominator 12GB (6 x 2GB) Model CMD12GX3M6A1600C8
    2 Gigabyte GTX 480 in SLI
    6 Western Digital VelociRaptor WD1500HLFS 150GB 10000 RPM in Raid 0
    2 Plextor sata Blu_ray Drives Model PX-B320SA
    Ultra X4 1200 Watt
    Thermaltake Armor+Thermaltake Bigwater 760 IS
    Creative Sound Blaster X-Fi Titanium Fatal1ty Champion
    Creative Gigaworks 750S 7.1 Suround 700 watt
    Windows 7 Ultimate 64 bit

Page 9 of 10 FirstFirst ... 78910 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •