Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 10 123 ... LastLast
Results 1 to 10 of 96

Thread: Need Help Overclocking UD9 / 980x, LAN not working, but detected.




  1. #1
    Join Date
    Jun 2010
    Location
    Phoenix, Arizona, United States
    Posts
    120

    Default Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    [INDENT] Goals: Achieving stable 12GB ram at 1800 MHZ low latencies, CPU to 4.2 GHZ on air.

    Hello,

    It's been a long time, I have been a busy filmmaker here in Phoenix, Arizona. I built this rig a long time ago back in September 2010 but just now have been able to sit down and work on it.

    My LAN is not detected by Windows 7, I am not sure if there are some BIOS settings I need to enable.

    I have included my BIOS Template below, my computer is crashing like crazy, blue screens galore...if anyone is in the Phoenix area possibly it would be best to stop on over to help me out.

    New Pictures:

    PC2011 pictures by DukeGangi - Photobucket

    Old Thread:

    $5,000 Gigabyte i7 980x PC: Configuring BIOS and Overclocking CPU / RAM

    CMOS:

    CPU = Intel i7 980X 32nm
    Motherboard = Gigabyte X58 UD9 Rev 1.0
    BIOS Version = F5h
    CPU Frequency = 4.00ghz
    Memory Frequency = 1600 MHZ
    Total Memory Size = 12288 MB
    System Temp = 45C
    MCH Temp = 57C
    CPU Temp = 40C
    Vcore = 1.264V
    DRAM Voltage = 1.632V
    Ram = 12GB G.Skill Ripjaws 2 Sets of 6 GB (3 x 2 gb)
    Ram Link = Newegg.com - G.SKILL Ripjaws Series 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 2000 (PC3 16000) Desktop Memory Model F3-16000CL9T-6GBRH

    M.I.T Status:

    Turbo Ratio: 24 All Cores
    Non-Turbo Ratio: 24 All Cores
    CPUID: 000206C2

    Power Management Settings:

    ACPI..................................53 (STR)
    Soft Off by PWR Button.......4 Sec Delay
    Power on ring....................On
    HPET Support.....................Enabled
    HPET Mode.........................64-Bit Mode
    AC Back Function................Soft Off
    ErP Support........................Disabled

    Code:

    Advanced CPU Features:
    CPU Clock Ratio ................................ [25X]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Disabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. 5.76ghz
    Uncore Frequency .......................... 3200mhz
    Isonchronous Frequency? Support? ..................[Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................[160]
    PCI Express Frequency (MHz) ........... Auto

    C.I.A.2 [Disabled].........................??? Could not find.

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Profile:
    Profile DDR Voltage...............1.6V
    Profile QPI Voltage.................1.2V
    Channel Interleaving...............6 [AUTO]
    Rank Interleaving...................4 [AUTO]

    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo]
    Extreme Memory Profile (X.M.P) ......... [Enabled - Profile 1]
    System Memory Multiplier (SPD) ........ [10.00]
    DRAM Timing Selectable (SPD) .......... [Quick]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................8
    tRAS .......................................24

    ##Channel A Advanced Timing Control##
    tRC ........................................47
    tRRD .......................................6
    tWTR ......................................6
    tWR ........................................10
    tWTP .......................................22
    tWL ........................................8
    tRFC .......................................88
    tRTP .......................................6
    tFAW ......................................30
    Command Rate (CMD) ................3

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................58 (On channel C it is at 59)

    B2B CAS Delay ..........................Auto

    Channel A Turn Around Settings:

    Reads: Dimms-6 Ranks-5 On the Same Rank - 1
    Writes: Dimms-6 Ranks-66 On the Same Rank - 1


    Advanced Voltage Control:

    CPU
    Load Line Calibration .................[Standard]
    CPU Vcore ...............................1.28750V
    QPI/VTT Voltage.......................1.580V
    CPU PLL...................................AUTO

    MCH/ICH
    PCIE......................................1.500V
    QPI PLL...................................1.100V
    IOH Core..................................1.100V
    ICH I/O...................................1.500V
    ICH Core.................................1.100V

    DRAM
    DRAM Voltage......................1.660V
    DRAM Termination................0.750V
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    Last edited by Gangifilms; 01-27-2011 at 09:26 PM.

  2. #2
    Join Date
    Jun 2010
    Location
    Phoenix, Arizona, United States
    Posts
    120

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    Bump, Kinda of an Emergency to get this PC up and running.

  3. #3
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    try to raise up the vtt voltage ..
    in my opinion 12 giga need more vtt 1.35-1.45

  4. #4
    Join Date
    Jun 2010
    Location
    Phoenix, Arizona, United States
    Posts
    120

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    What about my CPU to run it stable at 4.2GHZ

  5. #5
    Join Date
    Jun 2010
    Location
    Phoenix, Arizona, United States
    Posts
    120

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    Anyone? :-(

  6. #6

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    getting it run sable a 4.2 is easy
    first off what memory do you have
    and is your memory a matching set
    Intel Core i7-980X Extreme Edition Gulftown cooled By Swiftech APOGEE GTZ CPU waterblock
    Gigabyte GA-X58A-UD9 Water Cooled
    Corsair Dominator 12GB (6 x 2GB) Model CMD12GX3M6A1600C8
    2 Gigabyte GTX 480 in SLI
    6 Western Digital VelociRaptor WD1500HLFS 150GB 10000 RPM in Raid 0
    2 Plextor sata Blu_ray Drives Model PX-B320SA
    Ultra X4 1200 Watt
    Thermaltake Armor+Thermaltake Bigwater 760 IS
    Creative Sound Blaster X-Fi Titanium Fatal1ty Champion
    Creative Gigaworks 750S 7.1 Suround 700 watt
    Windows 7 Ultimate 64 bit

  7. #7
    Join Date
    Jun 2010
    Location
    Phoenix, Arizona, United States
    Posts
    120

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    Specs in my signature, memory matches.

  8. #8

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    here are my 24/7 settings

    CPU Clock 4159.9 MHz (original: 3333 MHz, overclock: 25%)

    also did you update your bios with newer one
    bios i am useing is GA-X58A-UD9 - GOOCUD9.W02



    Advanced CPU Features:
    CPU Clock Ratio ................................ [25X]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Disabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Disabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................auto
    Uncore Frequency ..........................3200
    Isonchronous Frequency? Support? ..................[Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................[160]
    PCI Express Frequency (MHz) ........... Auto

    C.I.A.2 [Disabled].........................

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Profile:
    Profile DDR Voltage...............1.6V
    Profile QPI Voltage.................1.2V
    Channel Interleaving...............6 [AUTO]
    Rank Interleaving...................4 [AUTO]

    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo]
    Extreme Memory Profile (X.M.P) ......... [Enabled - Profile 1]
    System Memory Multiplier (SPD) ........ [10.0]
    DRAM Timing Selectable (SPD) .......... [Quick]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................8
    tRAS .......................................24

    ##Channel A Advanced Timing Control##
    tRC ........................................47
    tRRD .......................................6
    tWTR ......................................6
    tWR ........................................10
    tWTP .......................................22
    tWL ........................................8
    tRFC .......................................88
    tRTP .......................................6
    tFAW ......................................30
    Command Rate (CMD) ................3

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................58 (On channel C it is at 59)

    B2B CAS Delay ..........................Auto

    Channel A Turn Around Settings:

    Reads: Dimms-6 Ranks-5 On the Same Rank - 1
    Writes: Dimms-6 Ranks-66 On the Same Rank - 1


    Advanced Voltage Control:

    CPU
    Load Line Calibration .................[Standard]
    CPU Vcore ...............................1.2875
    QPI/VTT Voltage.......................1.340
    CPU PLL...................................1.800V

    MCH/ICH
    PCIE......................................1.500V
    QPI PLL...................................1.100V
    IOH Core..................................1.100V
    ICH I/O...................................1.500V
    ICH Core.................................1.100V

    DRAM
    DRAM Voltage......................auto with XMP enabled
    DRAM Termination................0.750V
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    Last edited by Judge-dredd; 01-09-2011 at 03:51 PM.
    Intel Core i7-980X Extreme Edition Gulftown cooled By Swiftech APOGEE GTZ CPU waterblock
    Gigabyte GA-X58A-UD9 Water Cooled
    Corsair Dominator 12GB (6 x 2GB) Model CMD12GX3M6A1600C8
    2 Gigabyte GTX 480 in SLI
    6 Western Digital VelociRaptor WD1500HLFS 150GB 10000 RPM in Raid 0
    2 Plextor sata Blu_ray Drives Model PX-B320SA
    Ultra X4 1200 Watt
    Thermaltake Armor+Thermaltake Bigwater 760 IS
    Creative Sound Blaster X-Fi Titanium Fatal1ty Champion
    Creative Gigaworks 750S 7.1 Suround 700 watt
    Windows 7 Ultimate 64 bit

  9. #9

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    looking at your spec in sig
    12GB of G.SKILL Ripjaws Series 6GB (3 x 2GB)
    thats two 6 GB kits thats not a matching 12 gb kit plus i have seen many people haveing problems with ripjaw memory
    1333 might be the best you can do with 12 gb non matched kit

    also i see your running windows 7 /64
    change this in bios to HPET Mode.........................64-Bit Mode
    Intel Core i7-980X Extreme Edition Gulftown cooled By Swiftech APOGEE GTZ CPU waterblock
    Gigabyte GA-X58A-UD9 Water Cooled
    Corsair Dominator 12GB (6 x 2GB) Model CMD12GX3M6A1600C8
    2 Gigabyte GTX 480 in SLI
    6 Western Digital VelociRaptor WD1500HLFS 150GB 10000 RPM in Raid 0
    2 Plextor sata Blu_ray Drives Model PX-B320SA
    Ultra X4 1200 Watt
    Thermaltake Armor+Thermaltake Bigwater 760 IS
    Creative Sound Blaster X-Fi Titanium Fatal1ty Champion
    Creative Gigaworks 750S 7.1 Suround 700 watt
    Windows 7 Ultimate 64 bit

  10. #10
    Join Date
    Jun 2010
    Location
    Phoenix, Arizona, United States
    Posts
    120

    Default Re: Need Help Overclocking UD9 / 980x, LAN not working, but detected.

    The reason I got the memory is so I can have 3 fans on my heatsink the Noctua, the Corsair Dominator heatsinks are way to tall to fit a fan on the right side, as you can see in my photos. I think 1600 is possible.

Page 1 of 10 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •