Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21

Thread: Qx9650 + P45T extreme




  1. #11
    Join Date
    Aug 2010
    Location
    Australia
    Posts
    80

    Default Re: Qx9650 + P45T extreme

    new bar to add to sig :)

    4.2ghz q9550 495*8.5 stable - 22893 3dmark06
    3.3ghz q8200 475*7 stable
    current:-

    ga-ep45t extreme
    QX9650 + ek plexi waterblock
    G.skill DDR3 Pi 12800cl6 @1.6v
    Silverstone strider 1000w 80amp
    ATI sapphire 5850 + acetal/nickle waterblock ( 900/1200 )
    WD 320gb sata
    samsung 1tb sata
    Xspc plexi res + dc pump + 360 rad

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  3. #13
    Join Date
    Aug 2010
    Location
    Australia
    Posts
    80

    Default Re: Qx9650 + P45T extreme

    hmmm not sure what to make of this.. been trying to stablize that 4ghz overclock and haven't been too successful without temps too high for my liking ( are they high considering its watercooled? ) anyway i thought i'd see if the board would do it automatically and how it would go about doing it, so....

    those voltages are a bit "nucking futs" aren't they O.o.. i took the pic and rebooted at stock to post. does the board really need such over the top volts?
    also note how low mch (1.2v) and vcore (1.35v bios which is 1.3v in windows) are :S
    btw temps are into windows, take screenie.. no tests were run.
    Last edited by Ben_charm; 01-26-2011 at 11:17 AM.

    4.2ghz q9550 495*8.5 stable - 22893 3dmark06
    3.3ghz q8200 475*7 stable
    current:-

    ga-ep45t extreme
    QX9650 + ek plexi waterblock
    G.skill DDR3 Pi 12800cl6 @1.6v
    Silverstone strider 1000w 80amp
    ATI sapphire 5850 + acetal/nickle waterblock ( 900/1200 )
    WD 320gb sata
    samsung 1tb sata
    Xspc plexi res + dc pump + 360 rad

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Qx9650 + P45T extreme

    That is 3.6Ghz, nor 4Ghz? Were you testing "Auto" for 4Ghz or 3.6?

    Only voltage that looks really high to me in easytune is CPU PLL, but CPU term is a little on the high side too I guess, rest looks ok and normal temps too for those voltages.

  5. #15
    Join Date
    Aug 2010
    Location
    Australia
    Posts
    80

    Default Re: Qx9650 + P45T extreme

    Yeah that's for 400fsb x 9.. Just trying to learn what the board requires.. Funny enough I did tests at 333x8/9/10/11/12 and the volts were all the same, it doesn't seem to react to multiplier changes.. Anyway I've settled (for the time being) on a low volt,low temp, 3.6ghz, memory under 1600mhz low cas setting

    4.2ghz q9550 495*8.5 stable - 22893 3dmark06
    3.3ghz q8200 475*7 stable
    current:-

    ga-ep45t extreme
    QX9650 + ek plexi waterblock
    G.skill DDR3 Pi 12800cl6 @1.6v
    Silverstone strider 1000w 80amp
    ATI sapphire 5850 + acetal/nickle waterblock ( 900/1200 )
    WD 320gb sata
    samsung 1tb sata
    Xspc plexi res + dc pump + 360 rad

  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Qx9650 + P45T extreme

    Ahh ok, wasn't sure since you mentioned 4Ghz.

    Sounds like a nice stable place to stay for a while, to keep good temps too if that is what you are after. So what did you do with memory, still 1600 or less with tighter timings?

  7. #17
    Join Date
    Aug 2010
    Location
    Australia
    Posts
    80

    Default Re: Qx9650 + P45T extreme

    yeah i'll stay here as its a comfy volt/temp/speed range jumping to 3.8ghz is too big a jump..... 1.28v for 3.6ghz with memory at 1440mhz 6-7-6-20, static t-read 5, any tighter and i start throwing garbage which gets me kicked from bfbc2 LOL and the whole lot idles at 34,37,36,39 and the whole shebang hits 48,49,48,52 with prime 95 :)

    ( thats with the 5850 at 900/1200 and bumping the pcie to 102 )

    4.2ghz q9550 495*8.5 stable - 22893 3dmark06
    3.3ghz q8200 475*7 stable
    current:-

    ga-ep45t extreme
    QX9650 + ek plexi waterblock
    G.skill DDR3 Pi 12800cl6 @1.6v
    Silverstone strider 1000w 80amp
    ATI sapphire 5850 + acetal/nickle waterblock ( 900/1200 )
    WD 320gb sata
    samsung 1tb sata
    Xspc plexi res + dc pump + 360 rad

  8. #18
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  9. #19
    Join Date
    Aug 2010
    Location
    Australia
    Posts
    80

    Default Re: Qx9650 + P45T extreme

    tehehe.... check the temps, had some dry ice left over after doing some experiments with the kids




    4.2ghz q9550 495*8.5 stable - 22893 3dmark06
    3.3ghz q8200 475*7 stable
    current:-

    ga-ep45t extreme
    QX9650 + ek plexi waterblock
    G.skill DDR3 Pi 12800cl6 @1.6v
    Silverstone strider 1000w 80amp
    ATI sapphire 5850 + acetal/nickle waterblock ( 900/1200 )
    WD 320gb sata
    samsung 1tb sata
    Xspc plexi res + dc pump + 360 rad

  10. #20
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •