Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: X58A-UD3R can't install windows Xp on Marvell controller




  1. #1
    Join Date
    Jan 2011
    Location
    barry
    Posts
    55

    Default X58A-UD3R can't install windows Xp on Marvell controller

    I was trying to load windows xp64bit sp1 and sp2 without luck.
    I'm getting BLUE screen (preventing screen) all the time after first reboot.
    The way I'm loading windows are:
    1.In My bios all SATA controllers are set to AHCI mode.
    I connect my 2 HD to Gsata Raid Marvell controller and I did set to Raid 0.
    My raid is recognize in bios and I'm able to load windows 7 (NO problem) through marvell controller.
    The driver for Windows XP(1036 0.28mb release 2009-04-29)
    I'm using Power supply 850 W 2x 300 gig black 10000rpm western digital drives and PCI card


    Now I did more test and Of course Under AHCI mode I load proper driver 1.0.0.1036 for marvell raid controller and system recognize raid drive.
    After first reboot when is lo-gin to windows xp installations screen I experience blue screen.
    Also I did try to load windows in IDE mode on same Marvell controller on single drive and I have same blue screen.__Blue death screen !!!
    The other 2 controllers (gigabyte and Intel) controllers are loading windows just fine.
    Marvell controller is able to handle windows 7 installation no problem.
    Any windows xp (sp1,sp3 )86 or 64 are the problem to install.
    I'm coming to the conclusion this controller is defective.
    I remove all components left only 2 raid drives and old PCI video card to make sure my video is not causing this trouble.

    Please help I do not have any more ideas what to do.
    Adam

  2. #2
    Join Date
    Jan 2011
    Location
    barry
    Posts
    55

    Default Re: X58A-UD3R can't install windows Xp on Marvell controller

    I'm still having same issue.No progress.
    I hope someone here will share their experience and suggestions with me.
    Thanks in advance.
    Adam

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •