Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 45

Thread: X58A-UD3R problem using Winrar unpacking to USB drive




  1. #11
    Join Date
    Jan 2011
    Location
    barry
    Posts
    55

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Quote Originally Posted by wazza300 View Post
    What speed are you running your ram at? And try updating the Intel inf chipset drivers,makesure usb 1 and 2 are enabled in bios
    I was looking for the option to enable usb 1 and 2 and I don't found.I did found only option to enable usb3 and is set to enable.

  2. #12
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Is it a compressed drive? Right-click and check drive properties.

  3. #13
    Join Date
    Jan 2011
    Location
    barry
    Posts
    55

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Quote Originally Posted by Chike View Post
    Is it a compressed drive? Right-click and check drive properties.
    No is not compressed

  4. #14
    Join Date
    Jan 2011
    Location
    barry
    Posts
    55

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Quote Originally Posted by styr View Post
    No is not compressed
    I did install new fresh windows system and just install winrar and try decompressing with rar method.
    Same issue at 70% system hangs for about 1 minute and the continue to finish unraring the file.All system except cursor are not accessible at this point.
    Looks like is not the software issue since winzip is acting same way and fresh install.
    Please advise
    Thanks for all suggestions !!!!
    Last edited by styr; 02-14-2011 at 04:30 AM.

  5. #15
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Try with system performance enhance set to extreme in the bios
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  6. #16
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    You said it happen also when copying a file to the USB drive? So it must not be the winrar.
    What BIOS version do you have?

  7. #17
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Quote Originally Posted by styr View Post
    I did run performance tab and all looks fine CPU usage 2% PF 900mb.
    I also try to transfer large file 4 gig and up to USB external different drives as well and the system always freezes for 1 min at around 15 sec (71%) before finish.
    I test also same large files in windows 7 and same situation.
    I did transfer files between the internal drives and all looks fine.
    7 zip want hang the system but instead 1 min uncompressing the file will take over 3 min.
    From my testing the conclusion is not the winrar problem.
    Then what could be a problem?????
    So it's fine internally? If so and it's only a problem across the network then the problem could be your modem or LAN connection?

    What IOH and ICH voltages are you using, and what QPI/Vtt? Actually, please just grab a template from my signature and give us your full settings so we can look them over, thanks!

  8. #18
    Join Date
    Jan 2011
    Location
    barry
    Posts
    55

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Quote Originally Posted by Chike View Post
    You said it happen also when copying a file to the USB drive? So it must not be the winrar.
    What BIOS version do you have?
    Is the latest from gigabyte site FE

  9. #19
    Join Date
    Jan 2011
    Location
    barry
    Posts
    55

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Quote Originally Posted by Lsdmeasap View Post
    So it's fine internally? If so and it's only a problem across the network then the problem could be your modem or LAN connection?

    What IOH and ICH voltages are you using, and what QPI/Vtt? Actually, please just grab a template from my signature and give us your full settings so we can look them over, thanks!
    Thanks for looking.
    There is my template with all settings.

    Advanced CPU Features:
    CPU Clock Ratio ........23........................ [20x]
    Intel(R) Turbo Boost Tech .......auto........... [Enabled]
    CPU Cores Enabled ........all.................... [All]
    CPU Multi Threading .......enabled................... [Enabled]
    CPU Enhanced Halt (C1E) .....auto.............. [Disabled]
    C3/C6/C7 State Support ...disabled................. [Disabled]
    CPU Thermal Monitor ..........auto............... [Enabled]
    CPU EIST Function ..........auto.................. [Disabled]
    Virtualization Technology ......n/a............. [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ......auto............... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed ...........auto................... x36
    Uncore Frequency ........2667.................. (Always 2x memory Multi or 2x +1)
    Isonchronous Frequency ........n/a..........[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control .....disable........... [Enabled]
    BCLK Frequency (MHz) .......133..............
    PCI Express Frequency (MHz) .....auto...... [100]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ...........800...................[800mV]
    PCI Express Clock Drive ....900............... [900mV]
    CPU Clock Skew ............0ps................. [0ps]
    IOH Clock Skew .............0ps................ [0ps]


    Advanced DRAM Features:
    Performance Enhance .....extreme................. [Standard]
    Extreme Memory Profile (X.M.P) ...disabled...... [Disabled]
    System Memory Multiplier (SPD) .auto....... [AUTO]
    DRAM Timing Selectable (SPD) ...expert....... [Manual]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ..6....................
    tRCD .........8..............................
    tRP ...........6..............................
    tRAS ............20...........................

    Below values may be left in Auto if you like, generally this is fine. For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread

    ##Channel A Advanced Timing Control##
    tRC ..........27.............................. (Should be = tRAS + tRP or above for stability)
    tRRD .....4..................................
    tWTR ........4.............................. (Must be Write to Read Delay/Same Rank - (tWL + 4)
    tWR .......8.................................
    tWTP ...........19............................ (tWTP Must = tWR + tWL + 4)
    tWL ........7................................ (tWL Must be CAS Latency -1)
    tRFC ...........60............................
    tRTP ........4...............................
    tFAW ............16..........................
    Command Rate (CMD) ....1............

    ##Channel A Misc Timing Control##
    Round Trip Latency .........43..........

    B2B CAS Delay .....auto.....................


    Advanced Voltage Control:

    CPU
    Load Line Calibration .......auto.......... [Disabled]
    CPU Vcore ..................1.20625v.............auto
    QPI/VTT Voltage 1.150v .....1.200v.......
    CPU PLL 1.800v ........1.800v...............

    MCH/ICH
    PCIE 1.500v .....1.500v auto......................
    QPI PLL 1.100v ..1.100v auto.....................
    IOH Core 1.100v ..1.100v auto...................
    ICH I/O 1.500v ...1.500v auto....................
    ICH Core 1.1v .....1.1v auto...................

    DRAM
    DRAM Voltage 1.500v ....... auto to all down same values
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  10. #20
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Can you please add your hardware to the above, and a link to your memory or the model #.

    Also, on the memory timings, please leave all of them blank if you are not manually setting them, what you see on the left in the BIOS can be ignored as it is not what is used by auto. Just so we can see what you are manually setting or not.

    Thanks!

    Looks like all auto to me, except maybe a few, so this is probably part of the problem. I'll give you some full settings to try with once I know all of your hardware.

    Just so you know I wasn't lying or mistaken before in my comments about that not being an issue for me, here is my extraction of almost 7GB Rar file about to complete, this was done on a spinning hard drive to the same drive the Rar is stored on.

    The extraction took just over 4 minutes, and did not stall, freeze, or error




    Haha! Winger - She's Only Seventeen

Page 2 of 5 FirstFirst 1234 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •