Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 45

Thread: X58A-UD3R problem using Winrar unpacking to USB drive




  1. #21
    Join Date
    Jan 2011
    Location
    barry
    Posts
    55

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Quote Originally Posted by Lsdmeasap View Post
    Can you please add your hardware to the above, and a link to your memory or the model #.

    Also, on the memory timings, please leave all of them blank if you are not manually setting them, what you see on the left in the BIOS can be ignored as it is not what is used by auto. Just so we can see what you are manually setting or not.

    Thanks!

    Looks like all auto to me, except maybe a few, so this is probably part of the problem. I'll give you some full settings to try with once I know all of your hardware.

    Just so you know I wasn't lying or mistaken before in my comments about that not being an issue for me, here is my extraction of almost 7GB Rar file about to complete, this was done on a spinning hard drive to the same drive the Rar is stored on.

    The extraction took just over 4 minutes, and did not stall, freeze, or error




    Haha! Winger - She's Only Seventeen

    Hi Lsdmeasap,
    I did make a pictures of my bios screen if that will be ok with you?
    There is my infos.. about my system:
    Motherboard: x58a-ud3r
    Memory : 3 x Mushkin 998805 - 6GB Total (3x2GB) DDR3 PC3-12800 6-8-6-24 Redline (Triple Kit)
    Video card - Sapphaire Radeon HD6870 1GB GDDR5 PCI-e16
    Power supplay - Corsair 750 w
    2 x 300 GB 10000 RPM VelociRaptor in Raid 0 under the Marvell controller.

    Yes, all of the options are set as auto except timing for memory.

    I was having trouble to upload all the bios picture here ,so I sent them to my flickr page you can see here:

    Flickr: adamp1961's Photostream



    Thanks for all your help.
    I hope I did include all what you looking for.
    If not please let me know.
    Adam
    Attached Images Attached Images X58A-UD3R problem using Winrar unpacking to USB drive-p1100017_resize-jpg 
    Last edited by styr; 02-16-2011 at 09:26 PM.

  2. #22
    Join Date
    Jan 2011
    Location
    barry
    Posts
    55

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    I just update the link to bios photos. Hopefully will work this time without creating account.

  3. #23
    Join Date
    Jan 2011
    Location
    barry
    Posts
    55

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Quote Originally Posted by styr View Post
    I just update the link to bios photos. Hopefully will work this time without creating account.
    I will be glad if you let me know if all above information are good.
    Please let me know if you need any other specs to be able to guide me with
    tweaking my settings.

  4. #24
    Join Date
    Jan 2011
    Location
    barry
    Posts
    55

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Quote Originally Posted by Lsdmeasap View Post
    So it's fine internally? If so and it's only a problem across the network then the problem could be your modem or LAN connection?

    What IOH and ICH voltages are you using, and what QPI/Vtt? Actually, please just grab a template from my signature and give us your full settings so we can look them over, thanks!
    I did some more tests.
    Ive notice unraring pats of rars larger then total size 4 gig cosign the problem.Example : 92 files 49 mb large total 4500mb will always freeze at 69-71% for almost 1.5 minutes.Smaller total sizes 2gig are ok.X58A-UD3R problem using Winrar unpacking to USB drive-jpg

    If you notice a gap between 71% picture and 99% picture is almost 1min 30 sec.That when the freeze acure.
    To unpack same files to local drive 4.5 gig =92 files will take aprox..1 min without any problem.
    Same files to usb external drive will take 2min 30 sec including freeze for about 1 min.
    I do not mind taking the process longer since is usb but without freezing my system.

  5. #25
    Join Date
    Jan 2011
    Location
    barry
    Posts
    55

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Quote Originally Posted by styr View Post
    I did some more tests.
    Ive notice unraring pats of rars larger then total size 4 gig cosign the problem.Example : 92 files 49 mb large total 4500mb will always freeze at 69-71% for almost 1.5 minutes.Smaller total sizes 2gig are ok.X58A-UD3R problem using Winrar unpacking to USB drive-jpg

    If you notice a gap between 71% picture and 99% picture is almost 1min 30 sec.That when the freeze acure.
    To unpack same files to local drive 4.5 gig =92 files will take aprox..1 min without any problem.
    Same files to usb external drive will take 2min 30 sec including freeze for about 1 min.
    I do not mind taking the process longer since is usb but without freezing my system.
    another test.
    Transfering one large 4.5 gig file from local drive to usb:
    X58A-UD3R problem using Winrar unpacking to USB drive-screenshot008-jpg

    again about 70% of the file where transfer in light speed 15 sec and then stop for a 1minute.
    You see I try to open Firefox and task manager showing Firefox is not responding for that 1 minute.

  6. #26
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Thanks for your settings and info.

    It's probably all due to your BIOS not setting everything just right, try these settings and see if it helps any

    BSOD Error codes and what they mean:
    0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
    0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
    0X00000101 << Not enough Vcore Voltage
    0X00000109 << Not enough or too Much memory voltage


    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]  << Not sure what CPU you have?   So you can set this on auto
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]  << Enabled if you want speedstep (CPU downclock at idle)
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]  << Enabled if you want speedstep (CPU downclock at idle)
    Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. x36 or x44, both are fine at 133 Bclk
    Uncore Frequency ..........................  (Always 2x memory Multi or 2x +1, 2x +2, ect - Higher means more Vdimm or QPI/Vtt often but can help stability)   So set x24-26 when using x12 memory multiplier
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................  133
    PCI Express Frequency (MHz) ........... [100]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]  Extreme
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO] set x12
    DRAM Timing Selectable (SPD) .......... [Manual Expert]  Set each channel main timings and command rate one by one
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 6
    tRCD ....................................... 8 
    tRP ......................................... 6 
    tRAS ....................................... 24
    
    
    ##Channel A Advanced Timing Control##
    tRC ........................................ Auto
    tRRD ....................................... Auto
    tWTR ...................................... Auto
    tWR ........................................ Auto
    tWTP ....................................... Auto
    tWL ........................................ Auto
    tRFC ....................................... Auto
    tRTP ....................................... Auto
    tFAW ...................................... Auto
    Command Rate (CMD) ................ 1T
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ................... Auto
    
    B2B CAS Delay .......................... Auto
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Disabled or Level 1]
    CPU Vcore ...............................Auto
    QPI/VTT Voltage 1.150v ............ Set 1.25-1.4, this is all up to your CPU on how much is needed, some need more than others
    CPU PLL 1.800v ....................... Auto
    
    MCH/ICH
    PCIE 1.500v ........................... Auto
    QPI PLL 1.100v ....................... 1.20
    IOH Core 1.100v ..................... 1.14
    ICH I/O 1.500v ....................... Auto
    ICH Core 1.1v ........................ 1.14
    
    DRAM
    DRAM Voltage 1.500v .............. 1.66
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  7. #27
    Join Date
    Jan 2011
    Location
    barry
    Posts
    55

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Quote Originally Posted by Lsdmeasap View Post
    Thanks for your settings and info.

    It's probably all due to your BIOS not setting everything just right, try these settings and see if it helps any

    BSOD Error codes and what they mean:
    0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
    0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
    0X00000101 << Not enough Vcore Voltage
    0X00000109 << Not enough or too Much memory voltage


    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]  << Not sure what CPU you have?   So you can set this on auto
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]  << Enabled if you want speedstep (CPU downclock at idle)
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]  << Enabled if you want speedstep (CPU downclock at idle)
    Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. x36 or x44, both are fine at 133 Bclk
    Uncore Frequency ..........................  (Always 2x memory Multi or 2x +1, 2x +2, ect - Higher means more Vdimm or QPI/Vtt often but can help stability)   So set x24-26 when using x12 memory multiplier
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................  133
    PCI Express Frequency (MHz) ........... [100]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]  Extreme
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO] set x12
    DRAM Timing Selectable (SPD) .......... [Manual Expert]  Set each channel main timings and command rate one by one
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 6
    tRCD ....................................... 8 
    tRP ......................................... 6 
    tRAS ....................................... 24
    
    
    ##Channel A Advanced Timing Control##
    tRC ........................................ Auto
    tRRD ....................................... Auto
    tWTR ...................................... Auto
    tWR ........................................ Auto
    tWTP ....................................... Auto
    tWL ........................................ Auto
    tRFC ....................................... Auto
    tRTP ....................................... Auto
    tFAW ...................................... Auto
    Command Rate (CMD) ................ 1T
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ................... Auto
    
    B2B CAS Delay .......................... Auto
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Disabled or Level 1]
    CPU Vcore ...............................Auto
    QPI/VTT Voltage 1.150v ............ Set 1.25-1.4, this is all up to your CPU on how much is needed, some need more than others
    CPU PLL 1.800v ....................... Auto
    
    MCH/ICH
    PCIE 1.500v ........................... Auto
    QPI PLL 1.100v ....................... 1.20
    IOH Core 1.100v ..................... 1.14
    ICH I/O 1.500v ....................... Auto
    ICH Core 1.1v ........................ 1.14
    
    DRAM
    DRAM Voltage 1.500v .............. 1.66
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]


    Thanks for the new settings.
    I will try them right now and let you know the results.
    Sorry I completely forgot about the CPU. I have I7 950 3.06.
    I will ask you letter for some nice settings to overclock a little the speed.
    First I have to fix this annoying problem.
    Thank you for your all help!
    Adam

  8. #28
    Join Date
    Jan 2011
    Location
    barry
    Posts
    55

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Quote Originally Posted by Lsdmeasap View Post
    Thanks for your settings and info.

    It's probably all due to your BIOS not setting everything just right, try these settings and see if it helps any

    BSOD Error codes and what they mean:
    0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
    0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
    0X00000101 << Not enough Vcore Voltage
    0X00000109 << Not enough or too Much memory voltage


    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]  << Not sure what CPU you have?   So you can set this on auto
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]  << Enabled if you want speedstep (CPU downclock at idle)
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]  << Enabled if you want speedstep (CPU downclock at idle)
    Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. x36 or x44, both are fine at 133 Bclk
    Uncore Frequency ..........................  (Always 2x memory Multi or 2x +1, 2x +2, ect - Higher means more Vdimm or QPI/Vtt often but can help stability)   So set x24-26 when using x12 memory multiplier
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................  133
    PCI Express Frequency (MHz) ........... [100]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]  Extreme
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO] set x12
    DRAM Timing Selectable (SPD) .......... [Manual Expert]  Set each channel main timings and command rate one by one
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 6
    tRCD ....................................... 8 
    tRP ......................................... 6 
    tRAS ....................................... 24
    
    
    ##Channel A Advanced Timing Control##
    tRC ........................................ Auto
    tRRD ....................................... Auto
    tWTR ...................................... Auto
    tWR ........................................ Auto
    tWTP ....................................... Auto
    tWL ........................................ Auto
    tRFC ....................................... Auto
    tRTP ....................................... Auto
    tFAW ...................................... Auto
    Command Rate (CMD) ................ 1T
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ................... Auto
    
    B2B CAS Delay .......................... Auto
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Disabled or Level 1]
    CPU Vcore ...............................Auto
    QPI/VTT Voltage 1.150v ............ Set 1.25-1.4, this is all up to your CPU on how much is needed, some need more than others
    CPU PLL 1.800v ....................... Auto
    
    MCH/ICH
    PCIE 1.500v ........................... Auto
    QPI PLL 1.100v ....................... 1.20
    IOH Core 1.100v ..................... 1.14
    ICH I/O 1.500v ....................... Auto
    ICH Core 1.1v ........................ 1.14
    
    DRAM
    DRAM Voltage 1.500v .............. 1.66
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]


    The new settings are fine without error code.
    I have notice my memory runs now at 1600.
    But the transfer of files to USB it is still same problem.
    Maybe it is some tool (program to find out what happen when the system is in freeze state) or someone have some other suggestions.
    Lsdmeasap, Thanks again !

  9. #29
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    memory is 1600Mhz, that's why I put that.

    What QPI/Vtt did you set? Try setting 1.35-1.4 for now and test, if it's still an issue maybe you have some program or driver causing it?

    Do you have a spare empty hard drive you could test a clean OS install on to see if it still happens there?

  10. #30
    Join Date
    Jan 2011
    Location
    barry
    Posts
    55

    Default Re: X58A-UD3R problem using Winrar unpacking to USB drive

    Quote Originally Posted by Lsdmeasap View Post
    memory is 1600Mhz, that's why I put that.

    What QPI/Vtt did you set? Try setting 1.35-1.4 for now and test, if it's still an issue maybe you have some program or driver causing it?

    Do you have a spare empty hard drive you could test a clean OS install on to see if it still happens there?
    I just did change qpi from 1.260 to 1.360 and same issue.I don't know If I go higher?
    I did install a fresh xp already with just winrar.Also my second partitions is windows 7 and is acting exactly same way.
    If I use 7zip to unpack the rar will go smooth 3 times slower but smooth.I will live with that only transfer large chank of file to USB is a problem.
    I will install again windows xp on different controller and see if that will change anything.
    Thank you
    Adam

Page 3 of 5 FirstFirst 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •