Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: X58A UD7 ver2.0 Resume from Sleep Mode




  1. #1
    Join Date
    Mar 2011
    Location
    Utah
    Posts
    9

    Default X58A-UD7 ver2.0 Wont Resume from S3 Sleep Mode

    Hello,

    My brand new system is unable to resume from S3 sleep mode. I have an X58A UD7 board; i980x; Corsair 1000 PSU, 12Gigs 1600 RAM, Nvidia 580. Using the FC BIOS, but tried the latest bios (FD5) and no improvement. Will resume from sleep within a minute or two just fine, but after "sleeping" for 15+ mins, resume is hit and miss...mostly miss. System does power up, but then cycles on and restart every 5-8 seconds, like it was self diagnosing an overclock problem. The system is NOT overclocked.

    Any suggestions?
    Last edited by rvrasmussen; 03-01-2011 at 09:38 AM.

  2. #2
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: X58A UD7 ver2.0 Resume from Sleep Mode

    Is the system fully stable? What testing have you done to see if you stable? The system will not resume from sleep if the system is not 100% stable including a stable bios... With 12gb ram that will require changing voltage settings in bios... Please post you full system settings.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  3. #3
    Join Date
    Mar 2011
    Location
    Utah
    Posts
    9

    Default Re: X58A UD7 ver2.0 Resume from Sleep Mode

    My system seems to be stable. I have run Passmark Burn in Test; 3D Mark Vantage and 3DMark 2011 without problems. I have seen inconsistent crashing in Napoleon: Total War but dont know what to think about that. Video card maybe? Aside from the Napoleon crashing, the only other symptom is the trouble coming out of sleep mode. My settings (I hope these are the important ones):


    CPU = Model # i7 980x
    Motherboard = Model, Revision # GA-X58A-UD7 rev 2.0
    BIOS Version = F3
    Ram = Corsair 1600 12GB TOTAL


    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [25x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Disabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Disabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Clock Ratio..............................[Auto]
    QPI Link Speed ..............................6.4GHz
    Uncore Frequency .......................... 2667MHz
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Disabled]
    BCLK Frequency (MHz) .....................133
    PCI Express Frequency (MHz) ........... [Auto]


    Advanced Clock Control:
    CPU Clock Drive ..............................[700mV]
    PCI Express Clock Drive ................... [700mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Enabled]
    System Memory Multiplier (SPD) ........ [??] DRAM Freq 1600
    DRAM Timing Selectable (SPD) .......... [Auto]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...........................9
    tRCD .......................................9
    tRP .........................................9
    tRAS .......................................24
    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Auto]
    CPU Vcore ...............................[Auto]1.23125
    QPI/VTT Voltage 1.150v ............1.2V
    CPU PLL 1.800v .......................[Auto] 1.800V

    MCH/ICH
    PCIE 1.500v ...........................[Auto]
    QPI PLL 1.100v .......................[Auto]
    IOH Core 1.100v .....................[Auto]
    ICH I/O 1.500v .......................[Auto]
    ICH Core 1.1v ........................[Auto]

    DRAM
    DRAM Voltage 1.500v ..............1.5V
    Last edited by rvrasmussen; 03-01-2011 at 09:20 PM.

  4. #4
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: X58A UD7 ver2.0 Resume from Sleep Mode

    Try running LinX or Prim95 they are stress test programs to test stability...

    If you use LinX make sure you choose the option to use all ram set to run 20 passes.... Also make sure you are using Real Temp or CoreTemp or some software to monitor temps.

    That will tell you if you are stable.

    Edit - Load Optimized default settings before attempting anything.... CPU Clock Drive and PCI Express Clock Drive need to be 800/900 by defualt.

    Quote Originally Posted by rvrasmussen View Post
    Advanced Clock Control:
    CPU Clock Drive ..............................[700mV]
    PCI Express Clock Drive ................... [700mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  5. #5
    Join Date
    Mar 2011
    Location
    Utah
    Posts
    9

    Default Re: X58A UD7 ver2.0 Resume from Sleep Mode

    I'll fix those settings, run the tests and report back. Sidenote: I never adjusted those settings but loading optimized defaults set them as you indicated. No idea how they were adjusted in the first place. Are they likely the source of trouble?

  6. #6
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: X58A UD7 ver2.0 Resume from Sleep Mode

    Can be but must likely not enough qpi/vtt voltage
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  7. #7
    Join Date
    Jan 2011
    Location
    Switzerland
    Posts
    1

    Default Re: X58A UD7 ver2.0 Resume from Sleep Mode

    Hmm, same problem here with this board, running i7 950 on win7 x64 with Corsair Vengeance 3*4Gb. Windows initially complained that bios didn't support S3 but that went away after installing various Gigabyte software utils but still had the resume issues, OK after minutes, maybe upto 30 but can't be specific, after several hours wouldn't resume at all. Only solution I have so far found is to enable hybrid sleep, which I dont really want to use, but at least it seems to get around the problem.
    This seems to be something to do with ram after extended time but havnt got to the bottom of this yet.

    Andy

  8. #8
    Join Date
    Mar 2011
    Location
    Utah
    Posts
    9

    Default Re: X58A UD7 ver2.0 Resume from Sleep Mode

    Both LinX and Prime95 say my system is stable. Also, fixed both of those settings but still no improvement resuming from Sleep S3. However, I swapped the 580 out for an Nvid 295 and no problems with S3 sleep with that card. Dont know what to think at this stage; clearly the board is capable of S3 as evidenced by the 295. But with the 580...nope. Bad video card then? Bad combination of UD7 and 580? Any theories?

    Side note: Using hybrid sleep isnt an option since that takes longer than simply booting from scratch.

  9. #9
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: X58A UD7 ver2.0 Resume from Sleep Mode

    Quote Originally Posted by rvrasmussen View Post
    Both LinX and Prime95 say my system is stable.
    LinX passed 20 passes at full memory at your current bios settings? Prime95 passed? How many hrs did it pass before you stopped? 1-2hrs is not long enough. need 6-12hrs for testing.

    Also, fixed both of those settings but still no improvement resuming from Sleep S3. However, I swapped the 580 out for an Nvid 295 and no problems with S3 sleep with that card. Dont know what to think at this stage; clearly the board is capable of S3 as evidenced by the 295. But with the 580...nope. Bad video card then? Bad combination of UD7 and 580? Any theories?

    Side note: Using hybrid sleep isnt an option since that takes longer than simply booting from scratch.
    If swapping video card lets the system wake up from S3 sleep and you did not change drivers I would think it could be something with that card or the drivers you are using have issues with the card that wont let the system wake up from sleep.. Try updated drivers before condemning the card.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  10. #10
    Join Date
    Mar 2011
    Location
    Utah
    Posts
    9

    Default Re: X58A UD7 ver2.0 Resume from Sleep Mode

    Thanks for the advice.

    Drivers are the latest available (release, not beta).

    Only ran the test for about an hour each. I will run overnight and see what happens.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •