Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: Gigabyte x58a-ud3r rev.2 stopped booting gets stuck after power up.




  1. #1
    Join Date
    Feb 2011
    Location
    Israel
    Posts
    5

    Unhappy Gigabyte x58a-ud3r rev.2 stopped booting gets stuck after power up.

    Hi guyz,
    Opened a new thread...:)
    Lately, my system stopped powering up. The system just powers down and when I try to power it up again it powers down after 1-2 seconds. Sometimes it stays on but nothing boots up(not even the bios) and the fans work like crazy.
    I followed your advice and cleared the CMOS and reset the m/b by pulling out the batt for 30min, also tried with 1 dimm but this didn't help much.
    For some reason, I suspected that the PSU is behind all this so I played with the cables a bit (just swiched the connections between the PSU outlets) and disconnected the DVD... And suddenly the system booted into windows, so i upgraded the bios to FF and some of the m/b drivers but then.... Blue screen of Death!!!
    So now I either get a BSoD or the system just shuts down on me reandomly or when i connect my iPhone to charge it.

    Have to say that the system work flawlessly for 6 months and then just went babanaz!

    Any ideas?

    My spec:
    I7 950 no overclocking
    X58a ud3r rev.2
    6gb ram corsair dominator 1600 ddr3
    Sapphire hd5770
    PSU Seasonic X series 750w

    Tnx for your superb help,
    Tommy

  2. #2
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Gigabyte x58a-ud3r rev.2 stopped booting gets stuck after power up.

    Did you load optimized defaults after bios flash? What is qpi/vtt and dram voltage set to?
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  3. #3
    Join Date
    Feb 2011
    Location
    Israel
    Posts
    5

    Default Re: Gigabyte x58a-ud3r rev.2 stopped booting gets stuck after power up.

    Hi,

    I did load the optimized setting but now instead of BSoD the system just shuts down after 2-3 min after windows finished booting.
    for the no XMP profile (set to disabled) the voltages are:
    The QPI/VTT Voltage is 1.175V
    The DRAM Voltage is 1.5V
    With profile 1 for XMP the volatages are:
    1.2v for QPI
    1.65v for DDR

    Could you explain why the voltages matter?
    BTW, windows now states that the marvel 91xx ATA device drivers are missing... Does this have anything todo with the shutdowns? Where can I find updated drivers and what does the HDD controller have to do with all of this?!

    Tnx,
    Tommy

  4. #4
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Gigabyte x58a-ud3r rev.2 stopped booting gets stuck after power up.

    You don't need marvel drivers unless your using sata3,Intel port 0 is fine for os hdd,1.2v won't be enough for qpi/vtt,set it to 1.31v and set dram according to your ram either 1.5 or 1.66v,it will just crash or reboot if qpi/voltage is too low as it controlles the memory
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  5. #5
    Join Date
    Feb 2011
    Location
    Israel
    Posts
    5

    Default Re: Gigabyte x58a-ud3r rev.2 stopped booting gets stuck after power up.

    If the memory freq is set to 1600 MHz should the voltage be 1.6v?

  6. #6
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Gigabyte x58a-ud3r rev.2 stopped booting gets stuck after power up.

    Set it to what its rated at,it will be printed on the ram or box,doesn't matter what speed just set dram voltage to spec
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •