Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 37

Thread: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help




  1. #21
    Join Date
    Mar 2011
    Location
    rochester,mn
    Posts
    20

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    Ok..I will set qpi/vtt back to 1.35 and test each RAM. Is the DRAM voltage can be around 1.66? I will let u know. Thanks.

    Quote Originally Posted by wazza300 View Post
    Ok,I would set qpi/vtt voltage back to around 1.35v,then unplug all your ram and test each stick one at a time in the first white ram slot from cpu socket,it should boot into Windows if the ram stick is working,test each one

  2. #22
    Join Date
    Mar 2011
    Location
    rochester,mn
    Posts
    20

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    Window booted up normally at 1 stick of RAM in the first white slot toward the CPU at 1300 Mhz for all 6 sticks. Should I be testing at 1600 Mhz? One more thing, When I have all 6 sticks in, I can't select anything beside auto on the DRAM Timing Selectable. I have three settings there: auto, turbo, and extreme. Only auto will let me boot into Window. Just FYI. Now what is next?

    Quote Originally Posted by laxx0015 View Post
    Ok..I will set qpi/vtt back to 1.35 and test each RAM. Is the DRAM voltage can be around 1.66? I will let u know. Thanks.

  3. #23
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    The turbo,extreme tighten the advanced memory timings and would need more qpi/vtt voltage so that's probably why its not booting other than auto,I cantsee why you would need more than 1.45v for 12gb running at 1333mhz,

    It could be a badly matched set,I can't think of what else you could try,you say Windows didn't boot when qpi/vtt was se between 1.45-1.5v?
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  4. #24
    Join Date
    Mar 2011
    Location
    rochester,mn
    Posts
    20

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    Window only boot up at = qpt/vtt 1.455 for 8GB usable. I thought that might be the case..the timming is not matched on the two sets. Therefore I already ordered a 12GB set. It will be here tomorrow. Once I got it, I can try again at 1333 Mhz. I hope it works. Let quit for tonight. Thanks.

    Quote Originally Posted by wazza300 View Post
    The turbo,extreme tighten the advanced memory timings and would need more qpi/vtt voltage so that's probably why its not booting other than auto,I cantsee why you would need more than 1.45v for 12gb running at 1333mhz,

    It could be a badly matched set,I can't think of what else you could try,you say Windows didn't boot when qpi/vtt was se between 1.45-1.5v?

  5. #25
    Join Date
    Mar 2011
    Location
    rochester,mn
    Posts
    20

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    FYI...

    With pqi/vtt = 1.415, Window is booted and stable at 6GB running at 1330 Mhz. Thanks.

  6. #26
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    Remember the IMC is on the cpu do you have another cpu to try? I dont know if you already checked or not but have you checked the cpu socket for any bend or miss aligned pins? Also you can check first or after checking cpu socket check to make sure your are not over tightening cpu heat sink or that is not to loss.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  7. #27
    Join Date
    Mar 2011
    Location
    rochester,mn
    Posts
    20

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    I do not have another CPU to test with. I might just over tighten the H70 Coisar heat sink. I will try to loosen up the screws a little to see if it helps. By the way, I returned the two 6GB Coisar kits and got a 12GB 1600 MHz kit from GSkill (3X4GB at 9-9-9-24 1.5V). Thus, the motherboard only recognized 12GB at 1033 MHz. When the memory speed is set at 1333 Mhz, the board is just looping over the long beeps. Thus, I have to take 2 sticks out and restart the board to set it back to 1033 MHz. I would like to get the memory speed up to 1333 MHz if possible. Should I start to increase the PQI/VTT voltage? What is the starting for QPI/VTT voltage for Gskill memory? Should the DRAM voltage set at 1.66V even the stock say 1.5V? Please advice. Once I can get the memory speed run at 1333 MHz stable, I might try to overclock the CPU

    Quote Originally Posted by Acebmxer View Post
    Remember the IMC is on the cpu do you have another cpu to try? I dont know if you already checked or not but have you checked the cpu socket for any bend or miss aligned pins? Also you can check first or after checking cpu socket check to make sure your are not over tightening cpu heat sink or that is not to loss.

  8. #28
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    Please link or give the model number to your new memory, and then give us the settings you are trying or wanting to try that fail and we can advise back.

    If the memory is stock 1.5v then that is all you should need to use, but QPI/Vtt will need to be increased and uncore will need to be properly set as well.

  9. #29
    Join Date
    Mar 2011
    Location
    rochester,mn
    Posts
    20

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    My new memory is Gskill 12GB kit (3x4GB) at 9-9-9-24 1.5v and 1600 MHZ. The model number is F3-12800CL9T-12GBRL. I have the following HW as indicated in previous posts:

    CPU: I7-965 Extreme Edition
    MB: GIGABYTE GA-X58A-UD3R LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
    MB Bios Version: FF
    Heat Sink: H70 Cosair
    Window: 7-64 Bit Ultimate Edition

    The board is running stable and recognized all 12GB at 1033 MHZ. As soon as I increase the RAM speed to 1333 MHZ by move the multiplier to 10 while the BCLK is at 133, the board won't even boot. Thus, the board just beeps and looping. Moreover, all other setting on the board is either auto or normal. XMP memory profile disable. Thanks in advance for your help.....

    Quote Originally Posted by Lsdmeasap View Post
    Please link or give the model number to your new memory, and then give us the settings you are trying or wanting to try that fail and we can advise back.

    If the memory is stock 1.5v then that is all you should need to use, but QPI/Vtt will need to be increased and uncore will need to be properly set as well.

  10. #30
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    Thanks, try this then for 1600Mhz. I'm leaving out CPU settings for now and will assume you are leaving them at stock since you mentioned 1333Mhx using the x10 multiplier.

    If you want to overclock the CPU later we can help with that.

    BSOD Error codes and what they mean:
    0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
    0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
    0X00000101 << Not enough Vcore Voltage
    0X00000109 << Not enough or too Much memory voltage


    Code:
    Advanced CPU Features:
    
    Uncore & QPI Features:
    QPI Link Speed .............................. x36 or x44 both are fine
    Uncore Frequency ..........................  (Always 2x memory Multi or 2x +1, 2x +2, ect - Higher means more Vdimm or QPI/Vtt often but can help stability) So set 24-26
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................133
    PCI Express Frequency (MHz) ........... [100]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]  <<< Extreme may be best from what I find
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO]  << Set x12 for 1600MHz
    DRAM Timing Selectable (SPD) .......... [Manual]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................9
    tRCD .......................................9
    tRP .........................................9
    tRAS .......................................24
    
    Below values may be left in Auto if you like, generally this is fine.  Set command rate though for sure
    
    
    ##Channel A Advanced Timing Control##
    tRC ........................................  (Should be = tRAS + tRP or above for stability)
    tRRD .......................................
    tWTR ...................................... (Must be Write to Read Delay/Same Rank - (tWL + 4)
    tWR ........................................ 5-12 (Odd # values likely will fail)
    tWTP .......................................    (tWTP Must = tWR + tWL + 4)
    tWL ........................................   (tWL Must be CAS Latency -1)
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................ 1T
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ...................
    
    B2B CAS Delay ..........................
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ............................... Auto
    QPI/VTT Voltage 1.150v ............ 1.25-1.425
    CPU PLL 1.800v .......................
    
    MCH/ICH
    PCIE 1.500v ...........................
    QPI PLL 1.100v .......................
    IOH Core 1.100v ..................... 1.14-1.2
    ICH I/O 1.500v .......................
    ICH Core 1.1v ........................
    
    DRAM
    DRAM Voltage 1.500v .............. 1.5-1.54
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

Page 3 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •