Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 4 FirstFirst ... 234
Results 31 to 37 of 37

Thread: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help




  1. #31
    Join Date
    Mar 2011
    Location
    rochester,mn
    Posts
    20

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    I will try this and get back to you. I assume that system memory multiplier is set to 12 for 1600 MHz but if I only want 1333 MHz then I will have to set this value to 10? Thanks and I will get back to you as soon as I tried it. Thanks.

    Quote Originally Posted by Lsdmeasap View Post
    Thanks, try this then for 1600Mhz. I'm leaving out CPU settings for now and will assume you are leaving them at stock since you mentioned 1333Mhx using the x10 multiplier.

    If you want to overclock the CPU later we can help with that.

    BSOD Error codes and what they mean:
    0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
    0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
    0X00000101 << Not enough Vcore Voltage
    0X00000109 << Not enough or too Much memory voltage


    Code:
    Advanced CPU Features:
    
    Uncore & QPI Features:
    QPI Link Speed .............................. x36 or x44 both are fine
    Uncore Frequency ..........................  (Always 2x memory Multi or 2x +1, 2x +2, ect - Higher means more Vdimm or QPI/Vtt often but can help stability) So set 24-26
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................133
    PCI Express Frequency (MHz) ........... [100]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]  <<< Extreme may be best from what I find
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO]  << Set x12 for 1600MHz
    DRAM Timing Selectable (SPD) .......... [Manual]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................9
    tRCD .......................................9
    tRP .........................................9
    tRAS .......................................24
    
    Below values may be left in Auto if you like, generally this is fine.  Set command rate though for sure
    
    
    ##Channel A Advanced Timing Control##
    tRC ........................................  (Should be = tRAS + tRP or above for stability)
    tRRD .......................................
    tWTR ...................................... (Must be Write to Read Delay/Same Rank - (tWL + 4)
    tWR ........................................ 5-12 (Odd # values likely will fail)
    tWTP .......................................    (tWTP Must = tWR + tWL + 4)
    tWL ........................................   (tWL Must be CAS Latency -1)
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................ 1T
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ...................
    
    B2B CAS Delay ..........................
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ............................... Auto
    QPI/VTT Voltage 1.150v ............ 1.25-1.425
    CPU PLL 1.800v .......................
    
    MCH/ICH
    PCIE 1.500v ...........................
    QPI PLL 1.100v .......................
    IOH Core 1.100v ..................... 1.14-1.2
    ICH I/O 1.500v .......................
    ICH Core 1.1v ........................
    
    DRAM
    DRAM Voltage 1.500v .............. 1.5-1.54
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  2. #32
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    Quote Originally Posted by laxx0015 View Post
    I will try this and get back to you. I assume that system memory multiplier is set to 12 for 1600 MHz but if I only want 1333 MHz then I will have to set this value to 10? Thanks and I will get back to you as soon as I tried it. Thanks.
    If you set memory mutli to 10x for 1333 memory then just make sure uncore is set to atleast 20x or better.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  3. #33
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    Ya, sorry I just used 1600 because that was spec for the kit you are using.

    Do as mentioned above if you want to run 1333

  4. #34
    Join Date
    Mar 2011
    Location
    rochester,mn
    Posts
    20

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    It ended up with bent pins from the MB. I am returning the board to Newegg right now and getting a different MB. Any advice what is good MB for I7-695 Extreme Edition? Thanks.

  5. #35
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    What happened? They were always bent, or you mean you just now bent some trying to check something?

    X58A-UD7 would be a great board for that CPU. Or wait a while if you can for X58A-OC coming out soon

  6. #36
    Join Date
    Mar 2011
    Location
    rochester,mn
    Posts
    20

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    Quote Originally Posted by Lsdmeasap View Post
    What happened? They were always bent, or you mean you just now bent some trying to check something?

    X58A-UD7 would be a great board for that CPU. Or wait a while if you can for X58A-OC coming out soon
    I opened up and check the CPU socket and noticed that the pins were bent. So I request an RMA from Newegg. I didn't bend any pin. Thank for the advise. I might wait for the X58A-OC. Thanks.

  7. #37
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: BSOD when set memorry speed anything other than 1066 for x58a-ud3r-Help

    Ahh sorry to hear man! Odd it worked before and then just stopped without removing the CPU until later.

    Good luck with the RMA!

Page 4 of 4 FirstFirst ... 234

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •