Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 47

Thread: Mushkin Radioactive 998966 6GB DDR3 2000MHz




  1. #21

    Default Re: Mushkin Radioactive 998966 6GB DDR3 2000MHz

    Finally after spending the WHOLE night trying to figure this out I was able to get stable SO far @ 4563.17MHz memory running at 2028 7-10-7-24. Passed 50 Memtest 4.20v @ test #5, ran 10 LinX passes (temps are very good never hit above 67 full load) Now currently running Memtest HCI Design 3.6 still running at 135% (will run to about 1000%).

    One thing I did notice now that I have timmings tighten and stable thus far is that my GFlops were very high 99.7931 infact I had stopped the test to reboot and test again to make sure everything was correct. I test 4096gb of ram but I also notice that the time it took total to pass 10 passes total was about 14 minutes which each pass only took 82 seconds WOW! Now its time to get some much needed sleep. Oh I kept QPI x44 I thought it was holding me back but it wasn't I forgot to change a few other things (I was sleepy) so I keep it the same.

    Again I'll like to thank Lsdmeasap for all the help and time he took answering all my questions.

  2. #22
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Mushkin Radioactive 998966 6GB DDR3 2000MHz

    Awesome man, that's better than my CPU can handle!

    Nice to hear you've had such nice luck pushing things so far! You gonna try again with 7-9-7 now that you got the above stable?

  3. #23

    Default Re: Mushkin Radioactive 998966 6GB DDR3 2000MHz

    I think I will try my luck now with 7-9-7.
    Last edited by Shauntx; 04-05-2011 at 12:43 PM.

  4. #24

    Default Re: Mushkin Radioactive 998966 6GB DDR3 2000MHz

    okay within 20 minutes into Memtest I got 1 error increased DRAM volt to 1.68 still got 1 error hmmmm...... now I'm stuck lol. This is for 7-9-7.

  5. #25
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Mushkin Radioactive 998966 6GB DDR3 2000MHz

    1.66 as I mentioned, then try more QPI/Vtt instead.

    What uncore speed and QPI/Vtt are you using now anyway?

  6. #26

    Default Re: Mushkin Radioactive 998966 6GB DDR3 2000MHz

    uncore = 3864 MHz
    QPI/VTT = 1.45v (tried up to 1.55 and still error)

  7. #27
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  8. #28

    Default Re: Mushkin Radioactive 998966 6GB DDR3 2000MHz

    yeah I figured that was next lol ughhh now I have to adjust QPI/VTT all over again

    I really think that might be the problem there as well but will try and see what I get thanks :)

  9. #29
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  10. #30

    Default Re: Mushkin Radioactive 998966 6GB DDR3 2000MHz

    still pushing system :)

Page 3 of 5 FirstFirst 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •