Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 8 123 ... LastLast
Results 1 to 10 of 75

Thread: First Gigabyte , First Post Here , Anxiety Is Killing Me!




  1. #1
    Join Date
    Apr 2011
    Location
    Iowa
    Posts
    40

    Default First Gigabyte , First Post Here , Anxiety Is Killing Me!

    Just joined this forum and just bought my first Gigabyte board. I usually run EVGA or DFI boards so this bios is totally new to me. Car needed work so I sold my I7 rig and here I am back to s775. Plans are to oc my q6600 to 3.8Ghz and then 4.0Ghz if possible. My chip has a vid of 1.23v and has made it to 3.6Ghz easily until a PWM mosfet gave out on my DFI. Anyways, I'm getting my template together and I'll start another thread when I'm ready for assistance. seems like a lot of people have used this chip with the UD3 boards so I have high hopes. Just thought I'd say "Hi"!

    Oh yeah - is F13e the latest bios for the UD3R?
    Last edited by liquidfluidity; 04-01-2011 at 08:49 AM.
    Lian Li V1200
    Gigabyte EP45-UD3R/ Q6600 / Corsair H50
    Zotac GTX 480 AMP! Edition
    2x2gb Patriot Viper
    WD VelociRaptor 80Gb / WD Caviar Black 1TB
    Corsair 650HX
    Samsung Syncmaster 2033sw
    Samsung DVD/RW
    Win7 Ultimate x64

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: First Gigabyte , First Post Here , Anxiety Is Killing Me!

    Sorry to hear about your car, and loss of the i7 setup!

    Q6600 will top out at about 3.4-3.6Ghz or so, if you are lucky and have a golden one you might get 3.8, but I think 4Ghz even if possible wont be ideal for daily use due to the voltages it will likely require.

    You can post your settings here once you get them all gathered up. Yes, F13e is the latest BIOS for EP45-UD3R

    Good luck getting everything setup!

  3. #3
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: First Gigabyte , First Post Here , Anxiety Is Killing Me!

    Gerardz just OCed his Q6600 to 3.5GHz with low voltages and nice temps.
    Maybe 3.7GHz wil be possible with the lower VID and H50.

  4. #4
    Join Date
    Apr 2011
    Location
    Iowa
    Posts
    40

    Default Re: First Gigabyte , First Post Here , Anxiety Is Killing Me!

    All right. So here's my stock bios set up with a few things done here and there that I have seen automatically done here. I do realize that my power saving features are on yet and will be disabled until I get to an oc that I'm happy with. I also attached a 10x LinX run that I did before the H50 was added. The H50 dropped my temps about 12*C and when I started my 3.6GHz testing I was running about 72*C before the PWM mosfet went. This testing was done on my DFI board so I knowthat this chip has some potential. Like I said before my goal is 3.8GHz but if 3.6Ghz is more realistic - so be it. I think I'm ready to jump in! ;)

    Motherboard: UD3R: Rev#: 1.1 Bios Version:F13e
    Cpu: Q6600 VID. 1.2375v
    Ram: Patriot, Viper/Part#PVS24G6400LLK, Patriot Memory - Products
    Power Supply Unit: CORSAIR HX650


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [9]
    Fine CPU Clock Ratio ----------------- : [0.0]
    CPU Frequency ------------------------ : 2.40GHz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [DISabled]
    CPU Host Frequency (Mhz) --------------: [266]
    PCI Express Frequency (Mhz) ---------- : [100]

    C.I.A.2 ------------------------------ : [Disabled]

    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : [800mV]
    PCI Express Clock Drive -------------- : [900mV]
    CPU Clock Skew (ps) ------------------ : [OPS]
    MCH Clock Skew (ps) ------------------ : [0PS]

    DRAM Performance Control
    Performance Enhance ------------------- : [STANDARD]
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled]
    (G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [Auto]
    Memory Frequency (Mhz) ---------------- : [800MHz]
    DRAM Timing Selectable ---------------- : [MANUAL]

    Standard Timing Control
    CAS Latency Time -------- ?? ---------- : [5]
    tRCD ------------------- ?? ---------- : [5]
    tRP --------------------- ?? ---------- : [5]
    tRAS ------------------- ?? ---------- : [15]

    Advanced Timing Control
    tRRD ------------------- ?? ---------- : [Auto]
    tWTR ------------------- ?? ---------- : [Auto]
    tWR --------------------- ?? ---------- : [Auto]
    tRFC ------------------- ?? ---------- : [Auto]
    tRTP ------------------- ?? ---------- : [Auto]
    Command Rate (CMD) -------------------- : [Auto]

    Driving Strength Profiles
    Driving Strength --------- : ALL AUTO

    Channel A
    Static tRead Value --------------------- : [Auto]
    tRD Phase0 Adjustment ------------------ : [Auto]
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps

    DDR WRITE TRAINING --------------------- : AUTO

    Channel B
    Static tRead Value --------------------- : [Auto]
    tRD Phase0 Adjustment ------------------ : [Auto]
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps

    DDR WRITE TRAINING --------------------- : AUTO

    Motherboard Voltage Control
    CPU
    Voltage Types------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Disabled]
    CPU Vcore --------------- 1.2375v ---- : [1.2375v]

    CPU Termination --------- 1.20V* ----- : [1.20V]
    CPU PLL ----------------- 1.50V* ----- : [1.50V]

    CPU Reference ----------- ?.???V* ----- : [Auto]
    CPU Reference2 ---------- ????V* ----- : [AUTO] NA

    MCH/ICH
    MCH Core ---------------- 1.0V ------- : [1.2V]
    MCH Reference ----------- .760V ------- : [Auto]
    MCH/DRAM Ref ------------ .900V ------ : [Auto]
    ICH I/O ----------------- 1.5V ------- : [1.5V]
    ICH Core ---------------- 1.1V ------- : [1.1V]
    DRAM
    DRAM Voltage ------------ 1.8V ------- : [2.1V]
    DRAM Termination -------- .900V ------- : [Auto]
    Channel A Reference ----- .900V ------- : [Auto]
    Channel B Reference ----- .900V ------- : [Auto]

    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [ENabled]
    C2/C2E State Support ------------------- : [Disabled] NA
    x C4/C4E State Support ----------------- : [Disabled] NA
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function --------------------- : [ENabled]
    Virtualization Technology -------------- : [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect ------------- : [ENabled]
    Attached Images Attached Images First Gigabyte , First Post Here , Anxiety Is Killing Me!-capture3-jpg 
    Last edited by liquidfluidity; 04-03-2011 at 11:34 AM.
    Lian Li V1200
    Gigabyte EP45-UD3R/ Q6600 / Corsair H50
    Zotac GTX 480 AMP! Edition
    2x2gb Patriot Viper
    WD VelociRaptor 80Gb / WD Caviar Black 1TB
    Corsair 650HX
    Samsung Syncmaster 2033sw
    Samsung DVD/RW
    Win7 Ultimate x64

  5. #5
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: First Gigabyte , First Post Here , Anxiety Is Killing Me!

    You want 3.6 @ 400MHz or 450MHz FSB?

  6. #6
    Join Date
    Apr 2011
    Location
    Iowa
    Posts
    40

    Default Re: First Gigabyte , First Post Here , Anxiety Is Killing Me!

    450MHz would be nice but if I can get to 3.8GHz with a bit of sacrificing on the FSB - I would go for that. Hopefully , I can get some faster ram at some point but I have been pretty happy with these Patriots.
    Lian Li V1200
    Gigabyte EP45-UD3R/ Q6600 / Corsair H50
    Zotac GTX 480 AMP! Edition
    2x2gb Patriot Viper
    WD VelociRaptor 80Gb / WD Caviar Black 1TB
    Corsair 650HX
    Samsung Syncmaster 2033sw
    Samsung DVD/RW
    Win7 Ultimate x64

  7. #7
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: First Gigabyte , First Post Here , Anxiety Is Killing Me!

    if you hitting 78c on 2 of the cores at 3.4ghz i dont think you can go higher with out better cooling.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  8. #8
    Join Date
    Apr 2011
    Location
    Iowa
    Posts
    40

    Default Re: First Gigabyte , First Post Here , Anxiety Is Killing Me!

    Those temps were with an Ultima-90. When I installed the H50 and was running my 3.6GHz stress tests , I was only hitting around 72*C. This was running LinX.
    Lian Li V1200
    Gigabyte EP45-UD3R/ Q6600 / Corsair H50
    Zotac GTX 480 AMP! Edition
    2x2gb Patriot Viper
    WD VelociRaptor 80Gb / WD Caviar Black 1TB
    Corsair 650HX
    Samsung Syncmaster 2033sw
    Samsung DVD/RW
    Win7 Ultimate x64

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: First Gigabyte , First Post Here , Anxiety Is Killing Me!

    Try these for 3.6, then you can try to increase FSB to 420-425 for 3.8

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto or Fast]
    CPU Clock Ratio ---------------------- : [9]
    Fine CPU Clock Ratio ----------------- : [0.0]
    CPU Frequency ------------------------ : 3.6GHz
    
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [DISabled]  << Enabled
    CPU Host Frequency (Mhz) --------------: [266]  << 400
    PCI Express Frequency (Mhz) ---------- : [100]
    
    C.I.A.2 ------------------------------ : [Disabled]
    
    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : [800mV]
    PCI Express Clock Drive -------------- : [900mV]
    CPU Clock Skew (ps) ------------------ : [OPS]
    MCH Clock Skew (ps) ------------------ : [0PS]
    
    DRAM Performance Control
    Performance Enhance ------------------- : [STANDARD]
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled]
    (G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [Auto] 2.00D
    Memory Frequency (Mhz) ---------------- : [800MHz]
    DRAM Timing Selectable ---------------- : [MANUAL]
    
    Standard Timing Control
    CAS Latency Time -------- ?? ---------- : [5]  << 4
    tRCD ------------------- ?? ---------- : [5]  << 4
    tRP --------------------- ?? ---------- : [5]  << 4
    tRAS ------------------- ?? ---------- : [15]  << 12
    
    Advanced Timing Control
    tRRD ------------------- ?? ---------- : 3-4
    tWTR ------------------- ?? ---------- : 3-6
    tWR --------------------- ?? ---------- : 4-6
    tRFC ------------------- ?? ---------- : 52-62
    tRTP ------------------- ?? ---------- : 3-5
    Command Rate (CMD) -------------------- : [Auto]  2T
    
    Driving Strength Profiles
    Driving Strength --------- : ALL AUTO  << Set both channels to 800 or 1066
    
    Channel A
    Static tRead Value --------------------- : [Auto]  << 9 for now, can try 8 later
    tRD Phase0 Adjustment ------------------ : [Auto]
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps
    
    DDR WRITE TRAINING --------------------- : AUTO
    
    Channel B
    Static tRead Value --------------------- : [Auto]  << 9 for now, can try 8 later
    tRD Phase0 Adjustment ------------------ : [Auto]
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps
    
    DDR WRITE TRAINING --------------------- : AUTO
    
    Motherboard Voltage Control
    CPU
    Voltage Types------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Disabled]  << Enabled, Level one if you have an option
    CPU Vcore --------------- 1.2375v ---- : [1.2375v]  << 1.3-1.45+ All depends on your CPU
    
    CPU Termination --------- 1.20V* ----- : [1.20V]  << 1.225-1.34 should be plenty, keep under Vcore
    CPU PLL ----------------- 1.50V* ----- : [1.50V]  1.5-1.57 should be fine
    
    CPU Reference ----------- ?.???V* ----- : [Auto]
    CPU Reference2 ---------- ????V* ----- : [AUTO] NA
    
    MCH/ICH
    MCH Core ---------------- 1.0V ------- : [1.2V]
    MCH Reference ----------- .760V ------- : [Auto]
    MCH/DRAM Ref ------------ .900V ------ : [Auto]
    ICH I/O ----------------- 1.5V ------- : [1.5V]
    ICH Core ---------------- 1.1V ------- : [1.1V]
    
    DRAM
    DRAM Voltage ------------ 1.8V ------- : [2.1V]
    DRAM Termination -------- .900V ------- : [Auto]
    Channel A Reference ----- .900V ------- : [Auto]
    Channel B Reference ----- .900V ------- : [Auto]
    
    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [ENabled]  << Disabled
    C2/C2E State Support ------------------- : [Disabled] NA
    x C4/C4E State Support ----------------- : [Disabled] NA
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function --------------------- : [ENabled]   << Disabled
    Virtualization Technology -------------- : [Disabled]

  10. #10
    Join Date
    Apr 2011
    Location
    Iowa
    Posts
    40

    Default Re: First Gigabyte , First Post Here , Anxiety Is Killing Me!

    I'll give it a shot a little later. getting ready to head out for the afternoon. Thanks!
    Lian Li V1200
    Gigabyte EP45-UD3R/ Q6600 / Corsair H50
    Zotac GTX 480 AMP! Edition
    2x2gb Patriot Viper
    WD VelociRaptor 80Gb / WD Caviar Black 1TB
    Corsair 650HX
    Samsung Syncmaster 2033sw
    Samsung DVD/RW
    Win7 Ultimate x64

Page 1 of 8 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •