Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: Help with FP Audio from case to MB (Raven RV03 / Gigabyte Sniper)




  1. #1
    Join Date
    Jun 2010
    Location
    Trinidad
    Posts
    31

    Default Help with FP Audio from case to MB (Raven RV03 / Gigabyte Sniper)

    I'm unsure if I've got this right, so some confirmation would be great if anyone has any insight.

    The Sniper's FP audio header reads as:

    1. Mic_L
    2. Gnd
    3. Mic_R
    4. ACZ_DET (?)
    5. Line_R
    6. Mic_Det
    7. Gnd
    8. No Pin
    9. Line_R (typo? might mean Line_L?)
    10. Line_Det

    My new RV03 case has the following pins in a module which I can adjust as needed:

    1. Port1L (Mic_L?)
    2. Aud Gnd
    3. Port1R (Mic_R?)
    4. Presence (there is no wire connected to this!)
    5. Port2R (Line_R?)
    6. Sense1_Return (Mic_detect?)
    7. Sense_Send (?)
    8. No pin
    9. Port2L (Line_L?)
    10. Sense2_Return (Line_detect?)

    So most of the pins appear to line up (assuming I'm right and that the Raven's Port 1 is the Mic and Port 2 is the line out.) I'm not sure what the ACZ_DET pin on this motherboard is about, nor am I sure about the Presence and Sense_Send pins listed on the Raven's FP audio module (and why is there no wire connected to the Raven's Presence pin?)

    I did send an email to Silverstone about the vacant Presence pin, to see if that was intended or a defect.

    Any assistance is appreciated!
    Raven RV03 / Gigabyte G1.Sniper / 990x / 12GB RAM / 3 x 580 GTX / 2 x 250GB 510 & 3 x 160GB X-25M Intel SSDs / Antec HCP 1200W

  2. #2
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Help with FP Audio from case to MB (Raven RV03 / Gigabyte Sniper)

    Dont you have two black block connectors on the case audio wires? One should say ac97 and other should say hdaudio,they just plug into the mb audio socket either one should plug on fine however hdaudio is the best to use
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  3. #3
    Join Date
    Jun 2010
    Location
    Trinidad
    Posts
    31

    Default Re: Help with FP Audio from case to MB (Raven RV03 / Gigabyte Sniper)

    Thank you for your response.

    This case only has the Intel-spec HD audio connector. But, as mentioned above, it has no wire connected to the 'presence' pin, pin 4.

    This Gigabyte motherboard appears to follow the intel HD audio connector spec, except I'm not sure about pins 4 and 7. As it stands, if I plug the case audio connector into the MB, these will connect like this:

    MB / RV03
    4. ACZ_DET -> No wire
    7. Gnd -> Sense_Send

    Is that going to be ok? Or should I swap pins 4 and 7 from the case so that the case's Sense_Send is connected to the MB's ACZ_Det?
    Raven RV03 / Gigabyte G1.Sniper / 990x / 12GB RAM / 3 x 580 GTX / 2 x 250GB 510 & 3 x 160GB X-25M Intel SSDs / Antec HCP 1200W

  4. #4
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Help with FP Audio from case to MB (Raven RV03 / Gigabyte Sniper)

    It's normal for one pin to be missing,mine is the same on a nzxt lexa case,plug the hd audio block into the mb and it should work fine
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  5. #5
    Join Date
    Jun 2010
    Location
    Trinidad
    Posts
    31

    Default Re: Help with FP Audio from case to MB (Raven RV03 / Gigabyte Sniper)

    Quote Originally Posted by wazza300 View Post
    It's normal for one pin to be missing,mine is the same on a nzxt lexa case,plug the hd audio block into the mb and it should work fine
    Thanks, I'll try that.
    Raven RV03 / Gigabyte G1.Sniper / 990x / 12GB RAM / 3 x 580 GTX / 2 x 250GB 510 & 3 x 160GB X-25M Intel SSDs / Antec HCP 1200W

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •